位置：成果数据库 > 会议 > 会议详情页
Research on the influence factors for the deflection of micro-ball-end cutter in micro-end-milling p
  • 所属机构名称：南京航空航天大学
  • 会议名称：14th International Manufacturing Conference in China, IMCC2011
  • 时间：2012
  • 成果类型：会议
  • 相关项目：基于多重尺度效应耦合的超硬微铣刀设计理论和制造技术
作者： Chen, M.J|Wang, Z.J|Wu, C.Y|Ni, H.B|
同会议论文项目
基于多重尺度效应耦合的超硬微铣刀设计理论和制造技术
期刊论文 50 会议论文 41 专利 26
同项目会议论文
Tool Wear Characters in Micro-milling of Fully Sintered ZrO2 Ceramics by Diamond Coated End Mills
Effects of tool geometry and workpiece hardness on surface roughness in finish hard turning of AISI
Influence of tool flank wear on surface integrity in orthogonal milling of powder metallurgy superal
Effect of cutting speed on surface integrity in high speed machining nickel-based superalloy Inconel
Research on the Modeling and Experimenting of Burr Formation Process in Double-edged Micro-plat End
基于SPH法的微细切削最小切削厚度的研究
Micro-milling of fully sintered ZrO2 Ceramics with Diamond coated end mills
Influence of cutting speed on plastic deformation in machined surface of FGH95 PM superalloy
Analytical modeling to predict adiabatic shear critical condition for orthogonal cutting
Research on Positioning Error Compensation for Micro Milling Machine Tool
Design and Manufacturing of Ultra-hard Micro-Milling Tools
Molecular dynamics simulation of the Influence of Cutting Edge Radius on the Size Effect in Micro Cu
Residual stress evaluation in machined surfaces of copper by molecular dynamic simulation
Experimental Investigations of Size Effect on Cutting Force, Specific Cutting Energy, and Surface In
Research of an Open CNC System for MRF Machine Tool Based on UMAC
Friction on tool/chip interface in nanometric machining of copper
An Assessment, Definition, and Determination of The Minimum Uncut Chip Thickness of Microcutting and
Surface Quality in Meso Scale Milling of ZrO2 Ceramics with Diamond Coated End Mills
Analyses of Size Effect on Surface Roughness in Micro Turning Process
Research on WEDM process optimization for PCD micro milling tool
Development of electronic impact hammer and its application to face milling cutter modal analysis
Method of Precise Tool Setting for Micro Turning
Experimental study on precision milling of high volume fraction SiCP/Al composites with PCD end mill
Experiment Research of Polishing Capability of Magnetorheological Finishing with a Small Permanent M
The Analysis on Dynamic Characteristics and the Structural Optimization of HRG Polishing Machine Too
An Experimental Study on Micro-cutting Machining of Pure Tungsten
Experimental investigation on micromilling of cutting parameters optimization on zirconia ceramic
A Design of Parallel High Frequency Dynamometer Fixture
Experimental study on specific shear energy in high-speed machining 7050-T7451
Experiments and simulation of elastic-plastic deformation in thin wall part milling
Finite element modal analysis for face-milling cutter
Research on Structural Design and Optimization of Artificial Optical Compound Eye
Actually geometry of milling tool involved in cutting process
Research on Micromechanical Drilling of Micro-Hole Array in PVC Mask
The Analysis of Saw-tooth Chip Formation in High Speed Machining Through Material Micro-hardness Mea
An experimental study of machinability of FGH95 in end milling with coated carbide tools
Sustainable high speed dry cutting of magnesium alloys
Investigations of transient machined workpiece surface temperature in high speed peripheral milling
FEM analyzing effect of tool body materials on security reliability for face-milling cutter
Fluid characteristics of material flow in high speed metal cutting process