东篱科研大数据发现系统（DRDS）

位置：成果数据库 > 期刊 > 期刊详情页

地震时桥梁碰撞分析的等效Kelvin撞击模型

期刊名称：工程力学
时间：0
页码：128-133
语言：中文
分类：TU311.3[建筑科学—结构工程]
作者机构：[1]天津大学建筑工程学院,天津300072
相关基金：国家杰出青年科学基金（50425824）：国家自然科学基金重大研究计划重点项目（90715032）;天津市应用基础研究计划项目（05YFJMJC10900）
相关项目：强震作用下长大桥梁的灾变全过程及控制研究

关键词：桥梁, 地震, 碰撞, Kelvin撞击模型, 碰撞刚度, Hertz接触刚度, 恢复系数, 波动效应, bridge, earthquake, pounding, Kelvin impact model, impact stiffness, Hertz contact stiffness, recovery coefficient, wave effect

中文摘要：

建立地震时桥梁碰撞分析的Kelvin撞击模型的参数确定方法。基于Hertz接触理论,考虑波动效应,按照最大撞击力与最大撞击变形的比值,确定Kelvin撞击模型的碰撞刚度;数值分析了影响Kelvin撞击模型阻尼系数取值的邻梁碰撞恢复系数。结果表明：Kelvin撞击模型的碰撞刚度随Hertz接触刚度、撞击速度以及短梁与长梁的长度比的增大而增大;波动效应对碰撞刚度的影响明显,不能忽略;邻梁碰撞恢复系数随撞击速度增大而减小,随短梁与长梁的长度比减小而减小;确定Kelvin撞击模型的碰撞刚度和邻梁碰撞恢复系数对城市桥梁的合理取值范围应分别为3×10^5kN/m―6×10^5kN/m和0.7―0.95。

英文摘要：

A method to determine the parameters of Kelvin impact model for pounding analysis of bridges during earthquake is proposed. Based on Hertz contact theory and considering the wave effect, the impact stiffness of Kelvin impact model is determined according to the ratio of maximum impact load to maximum contact deformation. The recovery coefficient of pounding between adjacent girders, which influences the sampling of the damping coefficient of Kelvin impact model, is numerically analyzed. The results indicate that the impact stiffness of Kelvin impact model increases with an increase in the Hertz contact stiffness, the impact velocity, and the length ratio of the short to long girders. The wave effect has remarkable influence on the impact stiffness and can not be neglected. The recovery coefficient of pounding between adjacent girders decreases with an increase in the impact velocity, but with a decrease in the length ratio of the short to long girders. The rational sampling ranges of the impact stiffness of Kelvin impact model and the recovery coefficient of pounding between adjacent girders for urban bridges are found to be 3×10^5kN/m-6×10^5 kN/m and 0.6-0.95, respectively.