中文摘要：

In this work, the removal of thiophene from simulated oil has been studied by using the adsorption, extraction and oxidation/adsorption methods, respectively. In the adsorptive desulfurization process, different commercial adsorbents were used to eliminate thiophene at ambient pressure and mild temperature, and the results showed that carbon powder had the best adsorption ability. In the extractive desulfurization process, the best desulfurization result was obtained when DMF is used. In the oxidative/adsorptive desulfurization procedure using synthesized potassium ferrate as the oxidant and phosphomolybdic acid solution as the catalyst, thiophene was oxidized and removed from hydrocarbons in combination with active carbon adsorption, and the residual sulfur content of simulated oil could be reduced to 15.3mg/L from the original level of 200mg/L, with the desulfurization rate reaching 92.3%.

英文摘要：

In this work, the removal of thiophene from simulated oil has been studied by using the adsorption, extraction and oxidation/adsorption methods, respectively. In the adsorptive desulfurization process, different commercial adsorbents were used to eliminate thiophene at ambient pressure and mild temperature, and the results showed that carbon powder had the best adsorption ability. In the extractive desulfurization process, the best desulfurization result was obtained when DMF is used. In the oxidative/adsorptive desulfurization procedure using synthesized potassium ferrate as the oxidant and phos- phomolybdic acid solution as the catalyst, thiophene was oxidized and removed from hydrocarbons in combination with ac- tive carbon adsorption, and the residual sulfur content of simulated oil could be reduced to 15.3 mg/L from the original level of 200 mg/L, with the desulfurization rate reaching 92.3%.