位置：成果数据库 > 期刊 > 期刊详情页
面向过程工业的陶瓷膜制备与应用进展
  • 期刊名称：化工学报
  • 时间：0
  • 页码：2679-2688
  • 语言：中文
  • 分类：TQ028.18[化学工程]
  • 作者机构：[1]南京工业大学化学化工学院,材料化学工程国家重点实验室,江苏南京210009
  • 相关基金：国家重点基础研究发展计划项目（2009CB623400）;国家自然科学基金项目（20636020,20806038）;教育部新世纪优秀人才支持计划项目.
  • 相关项目：先进功能材料制备与应用的化学工程基础
作者： 范益群|徐南平|邢卫红|仲兆祥|
关键词： 陶瓷膜, 材料设计, 面向应用, ceramic membrane, material design, application-oriented
中文摘要：

陶瓷膜具有优异的化学稳定性、机械稳定性及分离性能,在过程工业中获得了成功应用,成为我国膜领域中最有国际竞争力的膜品种之一。本文基于面向应用过程的膜材料设计的理论框架,系统概述了陶瓷膜的定量制备技术、面向应用体系的陶瓷膜选择与设计方法以及膜应用过程中污染控制的研究进展,并对未来我国陶瓷膜领域的发展态势进行了分析和研讨。

英文摘要：

Recently, ceramic membranes have been widely used in process engineering and enjoyed rapid development on account of its inherently superior physical integrity, chemical resistance, and separation performance. Based on the theory and method of application-oriented ceramic membranes design, the recent developments in the preparation of ceramic membranes with quantitative control, the selection and design of ceramic membranes used for different application processes, and the fouling control of ceramic membranes during industrial processes were reviewed. The solutions for the problems and the preferential projects for future study were proposed.

同期刊论文项目
　面向应用过程的膜材料设计与制备基础研究
期刊论文 29
纳米镍在陶瓷膜表面吸附污染机理及降低吸附的方法
期刊论文 12 会议论文 2 获奖 2
先进功能材料制备与应用的化学工程基础
期刊论文 91 会议论文 18 著作 1
同项目期刊论文
FeAl金属间化合物多孔材料高温硫化性能及应用
Assembly of NaTAO(3) porous microspheres via imperfect oriented attachment mechanism
Fabrication of Tunable Core-Shell Structured TiO2 Mesoporous Microspheres Using Linear Polymer Polye
Study on the surface erosion route to the fabrication of TiO2 hollow spheres
基于片状前驱体组装中孔NiO微球
Photocatalytic decomposition of 4-chlorophenol over an efficient N-doped TiO2 under sunlight irradia
Co-sintering synthesis of bi-layer titania ultrafiltration membranes with intermediate layer of sol-
Interfacial Adhesion Between Polymer Separation Layer and Ceramic Support for Composite Membrane
Catalytic mechanism and reaction pathway of acetone ammoximation to acetone oxime over TS-1
Responsive Micellar Films of Amphiphilic Block Copolymer Micelles: Control on Micelle Opening and Cl
Effect of preheating treatment at 575 degrees C of green compacts on porous NiAl
Integrated Membrane Process for the Treatment of Desulfurization Wastewater
Fabrication of rutile TiO2 tapered nanotubes with rectangular cross-sections via anisotropic corrosi
Temperature-induced solid-phase oriented rearrangement route to the fabrication of NaNbO3 nanowires
Synthesis and characterization of porous Fe–25 wt.% Al alloy with controllable pore structure
Highly selective aerobic oxidation of primary amines to nitriles by ruthenium hydroxide
Oxidation behavior of porous NiAl prepared through reactive synthesis
真空烧结Fe-Al多孔材料的元素挥发及其对孔结构的影响
Ni3Al金属间化合物多孔材料的抗盐酸腐蚀性能
Continuous Acetone Ammoximation over TS-1 in a Tubular Membrane Reactor
Scouring-ball effect of microsized silica particles on operation stability of the membrane reactor f
A facile route to the fabrication of morphology-controlled Sb2O3 nanostructures
Monodispersed hollow microsphere of ZnO mesoporous nanopieces: Preparation,growth mechanism and phot
杨桃状ZnO纳米微球的制备及气敏性能的研究
Nanoporous Metal Membranes with Bicontinuous Morphology from Recyclable Block-Copolymer Templates
Effect of Catalyst Morphology on the Performance of Submerged Nanocatalysis/Membrane Filtration Syst
Experiment and calculation of filtration processes in an external-loop airlift ceramic membrane bior
Formation of porous Ni-Al intermetallics through pressureless reaction synthesis
Development of a new graded-porosity FeAl alloy by elemental reactive synthesis
Effect of initial solution apparent pH on the performance of submerged hybrid system for the p-nitro
Environmental corrosion resistance of porous TiAl intermetallic compounds
Reactive synthesis of microporous titanium-aluminide membranes
邻苯二酚和对苯二酚合成技术进展
TS-1催化丙酮氨氧化制丙酮肟的本征动力学研究
钛硅-1分子筛催化丙酮氨氧化反应条件优化
Fe-Al系金属间化合物多孔材料的制备及孔结构表征
粉末粒度对FeAl金属间化合物多孔材料孔结构的影响
弹状流对陶瓷膜超滤葡聚糖水溶液的影响
Effects of Al content on porous Fe-Al alloys
Effect of the surface properties on filtration performance of Al2O3-TiO2 composite membrane
Structural characteristics and high-temperature oxidation behavior of porous Fe-40 at.%Al alloy
Effect of initial solution apparent pH on nano-sized nickel catalysts in p-nitrophenol hydrogenation
微观尺度高分子协同组装ZnO纳米片
Model Study on a Submerged Catalysis/Membrane Filtration System for Phenol Hydroxylation Catalyzed b
Fabrication of Supported Mesoporous TiO2 Membranes: Matching the Assembled and Interparticle Pores f
热诱导组装Ta2O5空心微球
镍/陶瓷复合膜的制备及表征
Effects of Sintering Atmosphere on the Microstructure and Surface Properties of Symmetric TiO2 Membr
A Comparative Study of the Performance of Symmetric and Asymmetric Mixed-conducting Membranes
CO2-tolerant mixed conducting oxide for catalytic membrane reactor
FeAl多孔材料与不锈钢的焊接
Experimental and modeling study of oxygen permeation modes for asymmetric mixed-conducting membranes
Effect of dopant valence on the oxygen desorption and oxygen permeability of SrCo0.4Fe0.5M0.1O3-delt
Fabrication of Ti–Al micro/nanometer-sized porous alloys through the kirkendall effect
多孔TiAl金属间化合物的抗热盐酸腐蚀性能
Preparation of titania microfiltration membranes supported on porous Ti-Al alloys
An improved Parks equation for prediction of surface charge properties of composite ceramic membrane
Toward effective membranes for hydrogen separation: Multichannel composite palladium membranes
Hollow microsphere assembly of ZnO nanosheets
Optimization of preparation conditions for polydimethylsiloxane (PDMS)/ceramic composite pervaporati
多孔TiAl金属间化合物和434L不锈钢的钎焊连接
Bond strength and interface energy between Pd membranes and TiAl supports
A submerged membrane reactor for continuous phenol hydroxylation over TS-1
通过相变组装多孔Nb2O5
湿化学法制备氧化锆超滤膜及其表征
A facile route for the preparation of morphology-controlled NaTaO3 films
TS-1催化苯酚羟基化制苯二酚的本征动力学研究
一体式陶瓷膜反应器在对硝基苯酚催化加氢中的应用
Mechanism of nitrogen-concentration dependence on pH value: Experimental and theoretical studies on
Microspheric organization of multilayered ZnO nanosheets with hierarchically porous structures
Visible-light-driven TiO2 catalysts doped with low-concentration nitrogen species
陶瓷膜连续反应器的设计与工程应用
有机添加剂对TiO2/Ti复合微滤膜制膜液性质和成膜的影响
Pd/Ti-Al合金复合膜表面缺陷的影响因素
Ti/Sb-SnO2功能电极的制备及电化学处理废水的性能
Effects of Sintering Atmosphere on the Microstructure and Surface Properties of Symmetric TiO2 Membranes
Effect of Alumina Particle Size on Ni/Al2O3 Catalysts for p-Nitrophenol Hydrogenation
用于电泳沉积的TiO2悬浮液分散性能研究
陶瓷膜表面粗糙度对含油废水过滤性能的影响
Ni3Al金属间化合物多孔材料的制备及抗腐蚀性能
反应合成Ti-35%Al多孔合金的膨胀特性
Pd/多孔TiAl合金基复合透氢膜的制备与性能
FeAl金属间化合物多孔材料的制备
杨桃状ZnO纳米片微球的制备及气敏性能的研究
多孔不锈钢表面的陶瓷修饰及所负载的透氢钯膜
Effects of sintering temperature on microstructure and performance of Ti-based Ti-Mn alloy anodic material
原位反应烧结制备高强度多孔莫来石支撑体
Separation of ammonium salts from coking wastewater with nanofiltration combined with diafiltration
Conditions Optimization and Kinetics for the Cleaning of Ceramic Membranes Fouled by BaSO(4) Crystal
曝气方式对陶瓷膜分离过程的影响
陶瓷膜连续反应器的设计与工程应用
陶瓷膜表面粗糙度对含油废水过滤性能的影响
无机分离膜在应用过程中的污染清洗方法
还原条件对Pd/Al_2O_3催化剂上对硝基苯酚加氢性能的影响
脱铝USY催化剂上柠檬酸三丁酯的合成
多孔陶瓷材料的抗热震性能
微孔SiO2膜在水蒸气条件下的稳定性能
低温烧成高纯Al2O3多孔陶瓷膜支撑体的制备
具有梯度孔结构多孔陶瓷膜支撑体的制备
有机-无机复合SiO2膜的制备及水蒸气稳定性能研究
FeAl金属间化合物多孔材料高温硫化性能及应用
担载膜受限烧结孔结构模型的改进及验证
ZrO2中孔膜的制备及其耐酸碱腐蚀性能
包覆型Al2O3粉体制备低温烧成多孔陶瓷膜支撑体
基于膜表面与界面作用的膜污染控制方法
氧气在聚丙烯内吸附和扩散的分子模拟
纳米受限下溶质水化结构的分子模拟
有机添加剂对TiO2/Ti复合微滤膜制膜液性质和成膜的影响
用于电泳沉积的TiO2悬浮液分散性能研究
陶瓷膜表面粗糙度对含油废水过滤性能的影响
化学非均一表面及其在化工中的应用
γ-Al2O3中孔陶瓷膜的制备及表征
γ-Al2O3膜对单组分无机盐溶液的截留性能
TiO2中孔膜的制备及对Ni（2＋）的截留性能
渗透汽化在丙酮-丁醇发酵制备燃料丁醇中的研究进展
湿化学法制备多通道ZrO_2超滤膜
Preparation and Characterization of Alumina Membranes on Capillary Supports： Effect of Film-coating on Crack-free Membrane Preparation
中国膜科学技术的创新进展
多通道TiO_2超滤膜的制备及其在印染废水中的应用
聚合物溶液黏度对PDMS／PVDF复合膜微结构及渗透汽化性能的影响
第九届国际膜与膜过程会议（ICOM2011）回顾与展望
钛酸钾晶须填充酚醛树脂基摩擦材料的摩擦磨损机制研究
面向应用过程的膜材料设计与制备基础研究
多孔陶瓷材料的抗热震性能