位置：成果数据库 > 期刊 > 期刊详情页
Tribological properties of magnetic surface lubricated by ferrofluids
  • ISSN号：1286-0042
  • 期刊名称：The European Physical Journal - Applied Physics
  • 时间：2012.9.20
  • 页码：-
  • 相关项目：表面织构的微细电解加工基础问题及关键技术研究
作者： 王晓雷|
同期刊论文项目
表面织构的微细电解加工基础问题及关键技术研究
期刊论文 54 会议论文 12
同项目期刊论文
Study on the frictional properties of micro-magnet arrayed surface lubricated with ferrofluids
Modified microscale pattern transfer without photolithography of substrates
Reduction of undercutting in electrochemical micro-machining of micro-dimple arrays by utilizing oxy
Preparation and Characterization of Electrodeposited Ni-CeO2 Nanocomposite Coatings with High Curren
Fabrication of Ni-CeO2 Nanocomposite Coatings Synthesised via a Modified Sediment Co-Deposition Proc
Improving the Localization of Surface Texture by Electrochemical Machining with Auxiliary Anode
Fabrication of PDMS micro through-holes for electrochemical micromachining
基于光致抗蚀干膜的掩膜制备及其应用研究
Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film
电解加工中微细电极尖端效应的实验研究与仿真
生物芯片微流道的微细加工工艺
精密模具大面积微结构电铸制备工艺研究
微细掩膜电解加工的孤岛有限元仿真研究
织构化配流副摩擦磨损性能试验
混合织构发动机缸套的减摩试验研究
掩膜间隙和刻蚀温度对738模具钢侧蚀量的影响
电火花加工过程的温度场仿真与研究
Experimentalstudy of electrophoretically assisted micro-ultrasonic machining
Formationof porous hydrophobic stainless steel surfaces by maskless electrochemicalmachining
Improvement of dimensional uniformity on micro-dimple arrays generated by electrochemical micro-mach
Electrochemical etching of cylindrical nanoprobes using a vibrating electrolyte
Removal of islands from micro-dimple arrays prepared by through-mask electrochemical micromachining
Simulation Research on the Heat Dissipation Performance of a High Power LED Radiator
Preparation of a microprism Ni-Ceo2 nanocomposite mold by electroforming
阴极轨迹式平动型电铸机床PLC控制系统设计与实验
Fabrication of microprism mould by electroforming with high electrolyte flowrate
化学微蚀刻法和微细电镀法制备微流控芯片金属模具工艺对比研究
直流和直流脉冲电解制备表面多孔结构对比研究
部分沟槽表面织构摩擦学性能研究
Electrochemical micromachining of small tapered microstructures with sub-micro spherical tool
模具钢大面积微结构的微细电解和化学蚀刻的比较研究
Electrochemical micromachining of micro-dimple arrays using a polydimethylsiloxane (PDMS) mask
Design principles for the area density of dimple patterns
Investigation of machining accuracy of micro-dimples fabricated by modified microscale pattern trans
The Fabrication and Application of a PDMS Micro Through-Holes Mask in Electrochemical Micromanufactu
Pulsed electrochemical micromachining for generating micro-dimple arrays on a cylindrical surface wi
注塑模具型腔表面阵列微结构的蚀刻技术
微流控芯片模具化学蚀刻制造工艺研究