欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
采用结渣模型耦合气固两相流动燃烧模型，对一台DG1025／18．2-Ⅱ14型W火焰锅炉结渣特性进行了数值模拟，结合现场运行状况，对结渣位置、程度及原因进行了分析。结果表明，该锅炉的结渣位置主要是下炉膛侧墙、拱部燃烧器区域和前后墙局部区域。炉膛中心区域温度比两侧高，气流膨胀更迅速，压力更高，挤压两侧气流沿炉膛宽度方向向侧墙运动，产生偏斜，火焰冲刷侧墙，是导致W火焰锅炉侧墙结渣的根本原因。锅炉变工况运行时，切停或切换部分燃烧器，使炉内局部空气动力场偏斜，冲刷已关闭了燃烧器的拱部和前后墙区域，则是导致拱部燃烧器区域和前后墙局部区域结渣的主要原因。
英文摘要：
The numerical simulation of the ash deposition characteristics in the furnace of a DG1025/18.2-Ⅱ14-type W-flame boiler was carried out by using the slagging models coupled with the gas-solid two phase flows combustion models. Combined with the operational status, some detailed analysis on the ash deposition position, extent and reason was represented. The results show that the ash deposit is mainly on the side, front and rear walls of the lower furnace and the burner regions of the furnace arches. The flue gas pressure in the central region of the furnace is higher than that on the both sides because of the more rapid expansion of the flue gas under the higher temperature. Therefor, the flue gas in the furnace center makes the flue gas on the both sides deflective and move to the side walls, and the pulverized-coal flame scours the side walls. It results in the ash deposition on the side walls. In off-design operational conditions, such as stopping some burners, the local flow field is asymmetric and scours the local arch burner, front and rear Wall regions where the stopped burners locates. It is the main cause for the ash deposition on the arch burner regions and the front and rear wall regions.
同期刊论文项目
同项目期刊论文
Combustion Modeling of Blended Coal in a 300MW Tangentially-firing Boiler with a Three-mixture-fract
An Improved Petrov-Galerkin Spectral Collocation Solution for Linear Stability of Circular Jet, CMES
A Special Issue on 2009 Sino-Australian Symposium on Advanced Coal and Biomass Utilisation Technolog
An economic feasibility study of O2/CO2 recycle combustion technology based on existing coal-fired p
Relationship between nitrogenous species in coals and volatile nitrogen-containing yields during pyr
An investigation of the causes of the difference in coal particle ignition temperature between combu
Effect of cellulose, lignin, alkali and alkaline earth metallic species on biomass pyrolysis and gas
Physical quantity synergy in the field of turbulent heat transfer and its analysis for heat transfer
The effects of coal blending on the formation and properties of particulate matter during combustion
The Solution of Transient Riadative Transfer with Collimated Incident Serial Pulse in a Plane-Parall
Optimization of combustion based on introducing radiant energy signal in pulverized coal-fired boile
A compact optimization strategy for combustion in a 125 MW tangentially anthracite-fired boiler by a
Volatilization behavior of Cd and Zn based on continuous emission measurement of flue gas from labor
Numerical simulations of the slagging characteristics in a down-fired, pulverized-coal boiler furnac
A pilot scale study on co-capture of SO2 and NOx in O-2/CO2 recycled coal combustion and techno-econ
Pyrolysis of maize stalk on the characterization of chars formed under different devolatilization co
Effects of Indigenous and Added Minerals on Transformation of Organic and Inorganic Sulfur in Densit
Mineralogy and chemical composition of high calcium fly ashes and density fractions from a coal-fire
Study of flow mechanism and heat transfer enhancement in longitudinal-flow tube bundle of shell-and-
The Formation and Emission of Particulate Matter during the Combustion of Density Separated Coal Fra
An efficient solution for linear stability of circular jet: A combination of Petrov-Galerkin spectra
Physical quantity synergy in laminar flow field of convective heat transfer and analysis of heat tra
期刊信息
位置：