欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
为了研究强脉冲激光在镁合金中诱导冲击波的衰减,采用Nd：Glass脉冲激光（1054nm,23ns）对AZ31B变形镁合金试样表面进行冲击,并利用响应快、测量范围大的PVDF压电膜传感器以及示波器实时测量了强脉冲激光在镁合金靶中诱导激光冲击波的相对压力.根据冲击波每次在靶材背面反射时,所经过距离的不同得到激光冲击波在镁合金中的衰减规律.结果表明,在激光能量为5J的强脉冲激光作用下,镁合金中冲击波衰减的平均速度为5.83×103m/s,与镁合金中应力波纵波的传播速度相符;强脉冲激光诱导冲击波在镁合金中是以指数规律衰减的.试验所得分析结果对激光冲击强化镁合金的应用具有重要意义.
英文摘要：
In order to study the attenuation of shock waves induced by a high-power pulsed laser in magnesium alloy,an AZ31B magnesium alloy sample is processed with an Nd：Glass laser with a wavelength of 1054 nm and pulse width of 23 ns,and the relative pressures of the shock waves are measured on time by a polyvinglidene fluoride （ PVDF） gauge with a short rise time and a wide linear response range,combined together with an oscilloscope. The law of attenuation of laser shock wave is obtained by measuring the intensity pressures on the rear surface of the target for different thicknesses through which the shock waves pass each time. The experimental results show that the average velocity of the shock wave attenuation in magnesium alloy is 5. 83 × 103 m /s with using a laser pulsed energy of 5 J is in good agreement with the propagation velocity of stress longitudinal wave; the law of the shock wave attenuation is exponential. The experimental result can be very useful for the laser shock processing on magnesium alloy.
同期刊论文项目
同项目期刊论文
Simulation, analysis and validation of residual stresses on LY2 aluminium alloy by laser shock proce
Experimental Research of High-Speed Plate Deformation Process Shocked by Strong and Short Pulsed Las
Application of orthogonal sampling to incomplete data interferometric tomography: numerical simulati
Effects of multiple laser shock processing (LSP) impacts on mechanical properties and wear behaviors
Effects of laser shock processing on 00Cr12 mechanical properties in the temperature range from 25 &
Microstructure and tensile properties of the sub-micro and nano-structured Al produced by laser surf
Effects of laser shock processing on stress corrosion cracking susceptibility of AZ31B magnesium all
Microstructure and wear resistance enhancement of cast steel rolls by laser surface alloying NiCr-Cr
The microstructural mechanism for mechanical property of LY2 aluminum alloy after laser shock proces
Real time NDE of laser shock processing with time-of-flight of laser induced plasma shock wave in ai
Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austeniti
Mechanical properties and residual stresses changing on 00Cr12 alloy by nanoseconds laser shock proc
Effects of processing parameters on fatigue properties of LY2 Al alloy subjected to laser shock proc
Micro-structural strengthening mechanism of multiple laser shock processing impacts on AISI 8620 ste
Simulation, analysis, and validation of the residual stresses on LY2 aluminum alloy by laser shock p
Effects of different shocked paths on fatigue property of 7050-T7451 aluminum alloy during two-sided
Comparison of the simulation and experimental fatigue crack behaviors in the nanoseconds laser shock
Effect of laser shock processing on the fatigue crack initiation and propagation of 7050-T7451 alumi
Effects of laser shock processing with different shocked paths on mechanical properties of laser wel
Microstructure and corrosion behavior of the AISI 304 stainless steel after Nd:YAG pulsed laser surf
Effect of laser shock processing on the mechanical properties and fatigue lives of the turbojet engi
Mechanical Properties and Microstructure of Bionic Non-Smooth Stainless Steel Surface by Laser Multi
Influence of compressive stress on stress intensity factor of hole-edge crack by high strain rate la
位置：