欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
建立了半固态合金强流变轧制过程封闭矩形孔型中单位轧制压力分布的数学模型,并以AZ91D镁合金为例,通过计算研究了轧制带材厚度、带材宽度和轧辊半径对单位轧制压力分布的影响规律.结果表明,强流变轧制带材的厚度越小,宽度越窄,单位轧制压力峰值越大,平均单位轧制压力也越大;随着带材厚度减小,单位轧制压力峰值向出口移动,而随着带材宽度减小,单位轧制压力峰值向入口移动;随着轧辊半径增大,单位轧制压力的峰值和平均轧制压力都增大,峰值逐渐向出口偏移.
英文摘要：
Semisolid metal forming（SSF） is recognized as a new forming technology,which has been paid more and more attention by the researchers all over the world.The semisolid rolling process （rheo-rolling） combines the fabrication of semisolid slurry with continuously rolling as an important neoteric means to achieve near-shape forming.Compared with the traditional rolling process,this technology has the features of short machining process,low energy consumption,low cost equipment and high yield.However,one of the difficulties of using this technology to produce strip is that the solid and liquid phases prone to separation with each other during rheo-rolling deformation,especially when the semisolid slurry has a low solid fraction.The phenomenon causes macrosegregation and reduces the quality of the strip,as a result,limiting its industrial application.Using rectangular groove roller may solve this problem.In this paper,the mathematical model of unit rolling pressure distribution in rectangular groove during rheo-rolling was established.AZ91D magnesium alloy was taken as an example,and the effects of rolling strip thickness,width and roller radius on unit pressure were calculated and studied.The calculation results reveal that the smaller the thickness of rheo-rolled strip is,the narrower the width is,the bigger the peak unit rolling pressure is and the larger the average unit rolling pressure is.However,when the strip thickness decreases,the peak unit rolling pressure moves towards the exit while when width decreases,the peak unit rolling pressure moves towards the entrance.The larger the roller radius is,the bigger the peak unit rolling pressure is,the larger the average unit rolling pressure is,and the peak value deviates towards the exit.
同期刊论文项目
同项目期刊论文
Superplasticity-Like Behavior, Microstructures and Deformation Mechanism Map in. Superlight Mg-6Li-3
Effects of interfacial friction on the microstructures of magnesium-tin alloy during continuous rheo
Microstructure formation and mechanical properties in AZ31 alloy processed by continuous rheo-extrus
Effect of heat treatment on the microstructures and mechanical properties in AZ31 magnesium alloy pr
Electrodeposition of hydroxyapatite coating on Mg-4.0Zn-1.0Ca-0.6Zr alloy and in vitro evaluation of
Effects of process parameters on microstructure and properties of AZ91 alloy prepared by cooling/sti
Effects of technical parameters of continuous semisolid rolling on microstructure and mechanical pro
Microstructure and mechanical properties of Al-Mg-Sc alloy processed by semi-solid continuous castin
Effects of dynamic recrystallisation during deep rolling of semisolid slab and heat treatment on mic
The microstructure and tensile property of Mg-Zn-Ca-Zr alloy sheet coated with HA and its antihemoly
Microstructure formation mechanism and properties of AZ61 alloy processed by melt treatment with vib
Temperature distribution and its Influence on microstructure of AZ31 alloy during semisolid rheo-rol
Microstructure and properties of Mg-3Sn-1Mn (wt.%) alloy processed by a novel continuous shearing an
Microstructure evolution and properties of Mg-3Sn-1Mn (wt.%) alloy strip processed by semisolid rheo
Microstructure and properties of Mg-3Sn-1Mn (wt. %) alloy processed by a novel continuous shearing a
Semisolid die forging process, microstructures and properties of AZ31 magnesium alloy mobile telepho
Force analysis and experimental study of pure aluminum and Al-5%Ti-1%B alloy continuous expansion ex
Influence of parameters on microstructure of A356 alloy sheets processed by a novel rheo-rolling pro
Simulation of temperature field and metal flow during continuous semisolid extending extrusion proce
期刊信息
位置：