位置：成果数据库 > 期刊 > 期刊详情页
基于有限元法确立碳化钨顶锤的破裂判据
  • ISSN号：1000-5773
  • 期刊名称：《高压物理学报》
  • 时间：0
  • 分类：O521.3[理学—高压高温物理;理学—物理]
  • 作者机构：[1]吉林大学超硬材料国家重点实验室,吉林长春130012, [2]长春理工大学材料科学与工程学院,吉林长春130012
  • 相关基金：国家自然科学基金资助（50572032,50731006,50801030）
作者： 韩奇钢[1], 马红安[1], 李瑞[2], 张聪[1], 李战厂[1], 贾晓鹏[1]
关键词： 破裂判据, 顶锤, 有限元法, 高压物理, criterion for crack , anvil , finite element method, high pressure physics
中文摘要：

以有限元法为理论基础，通过运行大型有限元软件，成功构建了铰链式六面顶压机配套顶锤的有限元理论模型，并确立了碳化钨顶锤的破裂判据。模拟结果表明：以小斜边末尾处为应力参考点，依据第四强度理论，能够对碳化钨顶锤的性能进行更加合理的数值分析。依据此判据可知：在顶锤锤面及小斜边附近，裂纹高发区分布在小斜边附近；在顶锤轴向上，裂纹高发区分布在距离顶锤锤面30mm处。铰链式六面顶压机配套碳化钨顶锤的有限元模型以及碳化钨顶锤破裂判据的成功构建，为实现新型碳化钨顶锤的设计与研究奠定了基础，对促进实现铰链式六面顶压机腔体大型化具有现实意义。

英文摘要：

Based on finite element method,the model of tungsten carbide（WC） anvil and the criterion for crack of WC anvil used in China-type cubic high pressure apparatus have been founded successfully. The simulation results indicated that the criterion for crack of WC anvil should make the reference point at the end of bevel edge. According to the yon Mises criterion,we know that in the area of anvil surface and bevel edge, the cracks are often arising around the bevel edge. In the axis of anvil, the cracks are often arising at the place which is 30 mm below anvil surface. This study may greatly help to design new type WC anvil and improve the large volume cubic anvil type high pressure techniques.

同期刊论文项目
高性能热电材料的非平衡态制备科学和电声输运协调
期刊论文 148 获奖 2 专利 10
高性能填充式Skutterudite类热电材料的高压制备科学
期刊论文 49
高氮含量宝石级金刚石的合成与性质研究
期刊论文 57
同项目期刊论文
Effects of Al and Ti/Cu on synthesis of type-IIa diamond crystals in Ni70Mn25Co5-C system at HPHT
HPHT synthesis of micron grade boron-doped diamond single crystal in Fe-Ni-C-B systems
Hetero-epitaxial diamond single crystal growth on surface of cBN single crystals at high pressure an
Dependence of crystal quality and beta value on synthesis temperature in growing gem diamond crystal
Effect of seed sizes on growth of large synthetic diamond crystals
HPHT synthesis of large single crystal diamond doped with high nitrogen concentration
基于ANSYS的金刚石合成腔内的温度场分析
铁镍触媒合成的金刚石中包裹体的探讨
人工合成的400目细颗粒金刚石与破碎料的热稳定性比较
Fe-Si-C体系合成金刚石的生长特性
Synthesis of industrial diamonds using Fe Ni alloy powder as catalyst
Composition-dependent thermoelectric properties of PbTe doped with Bi2Te3
Influences of additive sulfur on the synthesis of industrial diamonds, using Ni70Mn25Co5 alloy powde
宝石级金刚石的生长速度与晶体品质的关系
The effect of an iron powder catalyst clad with a Fe2O3 layer on the nucleation of diamonds
Synthesis of diamond with high nitrogen concentration from powder catalyst-C-additive NaN3 by HPHT
Effects of the additive NaN3 added in powder catalysts on the morphology and inclusions of diamonds
HPHT synthesis of diamond with high concentration nitrogen using powder catalyst with additive Ba(N-
基于ANSYS/LS-DYNA的叶蜡石传压性能的有限元分析
Dependence of limited growth rate of high-quality gem diamond on growth conditions
A new dopant of NaN3 for high-concentration-nitrogen diamond synthesized by HPHT
Finite element analysis of high-pressure anvils according to the principle of lateral support
Finite element design of double bevel anvils of large volume cubic high pressure apparatus
Effect of carbon source with different graphitization degrees on the synthesis of diamond
Surface structure of large synthetic diamonds by high temperature and high pressure
在NiMnCo-Cu-C体系中生长宝石级金刚石单晶
用FeNiMn55#粉末触媒合成工业金刚石
AlN陶瓷的高压烧结研究
基于三维有限元法模拟分析六面顶顶锤的热应力
高压热处理对AlN陶瓷显微结构及导热性能的影响
添加剂硼对合成Ib型宝石级金刚石单晶的影响
高长径比柱状金刚石的高温高压合成与机理研究
温度梯度法宝石级金刚石的合成及表征
基于有限元法分析宝石级金刚石的合成腔体温度场
新型圆角式高压碳化钨硬质合金顶锤的有限元分析
高压烧结AlN陶瓷的微观结构和残余应力
高压下国产六面顶压机铰链梁和工作缸的应力分析
高温高压下掺杂N型PbTe的热电性能
Ⅱb型宝石级金刚石的表征及半导体特性研究
镍基合金制备PDC复合界面特性研究
添加剂LiF对FeNi粉末触媒合成金刚石的影响
添加La2O3的AlN陶瓷的高压低温烧结
添加剂Si对纯Fe粉末触媒合成金刚石的影响
添加剂Si对NiMnCo触媒合成金刚石的影响
铝对生长Ⅱa型宝石级金刚石的影响
有限元法计算模拟金刚石合成腔内的电学场
铁基粉末触媒的粒度及其均匀性对合成金刚石的影响
FeNi—Si—C体系金刚石的成核特性
(FeMn)xAl(1-x)-C体系金刚石的高温高压合成
Li3N—hBN体系中引入调节剂对合成cBN的影响
Dependence of nitrogen concentration in type Ib diamonds on synthesis temperature
球状石墨的粉压成型及以其为原料的金刚石生长
Synthesis of high quality type-Ib diamond crystals in carats grade
Effects of Ti additive on HPHT diamond synthesis in Fe-Ni-C system
Effects of a carbon convection field on large diamond growth under high-pressure high-temperature conditions
Influence of annealing treatment on as-grown Ib-type diamond crystal at a high temperature and high pressure
热电材料CoSb_3的高压制备及电学性质研究
Elevation of the Power Factor of Co4Sb12 Skutterudite with Sm-Doping in High-Pressure High-Temperatu
Qin Bingke, Li Xiaolei, Li Shangsheng, Su Taichao, Ma Hongan, Jia Xiaopeng
压力对CoSb2.750TexGe0.250-x n型方钴矿化合物的电输运性能的影响
高温高压合成热电材料AgPb18SbTe20的电学性能
Finite element method study on the temperature distribution in the cell of large single crystal diam
Experimental Evidence for Nucleation and Growth Mechanism of Diamond by Seed-Assisted Method at High
Synthesis and characterization of strip-shape diamonds from Fe-based alloy and graphite system under
热电材料PbTe1-xSex的高压制备及电学性能研究
The thermoelectric properties of In0.5Co4Sb12?xGex alloys prepared by HPHT
Enhanced thermoelectric properties in Co4Sb12?xTex alloys prepared by HPHT
HPHT synthesis and thermoelectric properties of CoSb3 and Fe0.6Co3.4Sb12 skutterudites
Sm填充型方钴矿化合物的高温高压合成及电输运特性研究
方钴矿化合物FexCo4-xSb12的高温高压合成及其电输运特性研究
FEM study on a double-beveled anvil and its application to synthetic diamonds
Finite-element analysis on performance and shear stress of cemented tungsten carbide anvils used in
高压合成La填充型CoSb3方钴矿热电材料及其电输运性能
Enhanced thermoelectric performance of AgSbTe2 synthesized by high pressure and high temperature
Ba0.32Co4Sb12-xTex的高压合成及其电学性质
Thermoelectric properties of SmxCo4Sb12 prepared by high pressure and high temperature
Thermoelectric Properties of Te-Doped Ba0.32Co4Sb12?xTex Prepared at HPHT
Transport properties of Ag0.8Pb18SbTe20 prepared by high pressure and high Temperature
Finite element analysis and design of cubic high-pressure anvils based on the principle of lateral s
HPHT synthesis and electrical transport properties of SmxCo4Sb12
Composition-dependent transport properties of Ag1?xPb18SbTe20 prepared by high pressure
基于三维有限元法模拟分析六面顶顶锤的热应力
高长径比柱状金刚石的高温高压合成与机理研究
温度梯度法宝石级金刚石的合成及表征
基于有限元法分析宝石级金刚石的合成腔体温度场
新型圆角式高压碳化钨硬质合金顶锤的有限元分析
高压下国产六面顶压机铰链梁和工作缸的应力分析
镍基合金制备PDC复合界面特性研究
Ba填充方钴矿化合物的高压合成及热电性能
Ba_（0.32）Co_4Sb_（12-x）Te_x的高压合成及其电学性质
热电材料PbTel-xSex的高压制备及电学性能研究
高压合成La填充型CoSb_3方钴矿热电材料及其电输运性能
高压合成AgSbTe2-Sb2Te3的热电性能研究
Co4Sb12-xSex的高温高压合成及电学输运性能研究
Li3N—hBN体系中引入调节剂对合成cBN的影响
Effects of a carbon convection field on large diamond growth under high-pressure high-temperature conditions
Enhancement of the thermoelectric performance of beta-Zn(4)Sb(3) by in situ nanostructures and minut
Enhanced performances of melt spun Bi(2)(Te,Se)(3) for n-type thermoelectric legs
Thermoelectric Properties of Sb-Doped Mg(2)Si(0.3)Sn(0.7)
Structure and Transport Properties of Double-Doped CoSb(2.75)Ge(0.25-x)Te(x) (x=0.125-0.20) with in
Doping effect on thermoelectric properties of nonstoichiometric AgSbTe(2) compounds
Improved Thermoelectric Performance of p-Type Bismuth Antimony Telluride Bulk Alloys Prepared by Hot
Effects of Cooling Rate on Thermoelectric Properties of n-Type Bi(2)(Se(0.4)Te(0.6))(3) Compounds
Improved Thermoelectric Properties of Al-Doped Higher Manganese Silicide Prepared by a Rapid Solidif
The thermoelectric properties of In(x)Co(4)Sb(12) alloys prepared by HPHT
Grain size effect on the phase transformations of higher manganese silicide thermoelectric materials
Phase transition and high temperature thermoelectric properties of copper selenide Cu(2-x)Se (0 <
Effect of hot-press treatment on electrochemically deposited antimony telluride film
Enhanced thermoelectric performance in Na-doped p-type nonstoichiometric AgSbTe(2) compound
Composition-dependent transport properties of Ag(1-x)Pb(18)SbTe(20) prepared by high pressure
Synthesis and thermoelectric properties of thermoelectric materials of the skutterudites In(0.3)Co(4
Thermoelectric and thermomechanical properties of the hot pressed polycrystalline Bi(0.5)S(1.5)Te(3)
Flux synthesis and thermoelectric properties of eco-friendly Sb doped Mg(2)Si(0.5)Sn(0.5) solid solu
Enhanced thermoelectric performance and novel nanopores in AgSbTe(2) prepared by melt spinning
Structure and Thermoelectric Properties of Te- and Ge-Doped Skutterudites CoSb(2.875-x)Ge(0.125)Te(x
Antimony Telluride Thin Films Electrodeposited in an Alkaline Electrolyte
The enhanced thermoelectric properties of Ba(0.25)Pb(0.05)Co(4)Sb(11.5)Te(0.5) alloys prepared by HP
Effect of Sb Doping on the Thermoelectric Properties of Mg(2)Si(0.7)Sn(0.3) Solid Solutions
Improved Thermoelectric Properties of (GeTe)(90)(Ag(y)Sb(2-y)Te(3-y))(10) by Tuning the Ag-to-Sb Rat
Correlation of thermoelectric and microstructural properties of p-type CeFe(4)Sb(12) melt-spun ribbo
Thermoelectric properties of Ti(0.2)Co(4)Sb(11.5)Te(0.5) prepared by HPHT
Thermoelectric Properties of Te-Doped Ba(0.32)Co(4)Sb(12-x)Te(x) Prepared at HPHT
The thermoelectric properties of Co(4)Sb(12-x)Te(x) synthesized at different pressure
Rapid synthesis of high thermoelectric performance higher manganese silicide with in-situ formed nan
P-type doping of Hf(0.6)Zr(0.4)NiSn half-Heusler thermoelectric materials prepared by levitation mel
Optimizing thermoelectric performance of Cd-doped beta-Zn(4)Sb(3) through self-adjusting carrier con
人工合成的400目细颗粒金刚石与破碎料的热稳定性比较
In situ energy dispersive X-ray diffraction study of iron disilicide thermoelectric materials
Improved thermoelectric figure of merit of self-doped Ag(8-x)GeTe(6) compounds with glass-like therm
Improved Thermoelectric Performance and Mechanical Properties of Nanostructured Melt-Spun beta-Zn(4)
High-Performance (Ag(x)SbTe(x/2+1.5))(15)(GeTe)(85) Thermoelectric Materials Prepared by Melt Spinni
Natural Microstructure and Thermoelectric Performance of (GeTe)(80)(Ag(y)Sb(2-y)Te(3-y))(20)
Improved Thermoelectric Performance of Higher Manganese Silicides with Ge Additions
Synthesis and thermoelectric properties of p-type Zn-doped Zn(x)In(1-x)Sb compounds
Thermal and electrical transport properties of VA-element doped Pb(9.6)M(0.2)Te(10-x)Se(x) (M = Sb,
The synthesis and thermoelectric properties of Yb/Sr double-atom-filled Yb(x)Sr(8-x)Ga(16)Ge(30) typ
Recrystallization induced in situ nanostructures in bulk bismuth antimony tellurides: a simple top d
Microstructures and thermoelectric properties of n-type melting spun (Bi(0.85)Sb(0.15))(2) (Te(1) (-
Microstructure and thermoelectric properties of SiGe-added higher manganese silicides
Thermoelectric properties of dual-element-filled skutterudites La(x)Ca(0.1)Co(4)Sb(12)
Mechanochemical decomposition of higher manganese suicides in the ball milling process
Effects of In doping on crystal structure and thermoelectric properties of n-type skutterudites
Preparation and thermoelectric properties of polycrystalline nonstoichiometric Yb(14)MnSb(11) Zintl
Improved thermoelectric properties of AgSbTe(2) based compounds with nanoscale Ag(2)Te in situ preci
Thermoelectric properties of Sm(x)Co(4)Sb(12) prepared by high pressure and high temperature
Transport properties of Ag(0.8)Pb(18)SbTe(20) Prepared by high pressure temperature
Nanostructured PbTe compound synthesized by a simple chemical route
Elevation of the Power Factor of Co(4)Sb(12) Skutterudite with Sm-Doping in High-Pressure High-Tempe
Identifying the Specific Nanostructures Responsible for the High Thermoelectric Performance of (Bi,S
High performance n-type (Bi,Sb)(2)(Te,Se)(3) for low temperature thermoelectric generator
Effects of yttrium doping on the thermoelectric properties of Hf(0.6)Zr(0.4)NiSn(0.98)Sb(0.02) half-
Simultaneously optimizing the independent thermoelectric properties in (Ti,Zr,Hf)(Co,Ni)Sb alloy by
Additive-aided electrochemical deposition of bismuth telluride in a basic electrolyte
Anisotropic Growth of Cubic PbTe Nanoparticles to Nanosheets: Controlled Synthesis and Growth Mechan
Phase compositions, nanoscale microstructures and thermoelectric properties in Ag(2-y)Sb(y)Te(1+y) a
MICROSTRUCTURE AND THERMOELECTRIC PROPERTIES OF (Zr,Hf)NiSn-BASED HALF-HEUSLER ALLOYS BY MELT SPINNI
High thermoelectric figure of merit and nanostructuring in bulk AgSbTe(2)
HPHT synthesis and electrical transport properties of Sm(x)Co(4)Sb(12)
Synthesis and thermoelectric properties of hydrochloric acid-doped polyaniline
Effects of melt spinning process on microstructure and thermoelectric properties of n-type InSb comp
Microstructure and themoelectric properties of p-type filled skutterudite Ce(0.3)Fe(1.5)Co(2.5)Sb(12
压力对CoSb2.750TexGe0.250-x n型方钴矿化合物的电输运性能的影响
高温高压合成热电材料AgPb18SbTe20的电学性能
Sm填充型方钴矿化合物的高温高压合成及电输运特性研究
方钴矿化合物FexCo4-xSb12的高温高压合成及其电输运特性研究
Syntheses and thermoelectric properties of Bi2Te3/Sb2Te3 bulk nanocomposites with laminated nanostru
Synthesis and thermoelectric properties of (Ti,Zr,Hf)(Co,Pd)Sb half-Heusler compounds
Enhanced thermoelectric properties in Co(4)Sb(12-x)Te(x) alloys prepared by HPHT
Improved thermoelectric properties of La-doped Bi(2)Sr(2)Co(2)O(9)-layered misfit oxides
High performance In(x)Ce(y)Co(4)Sb(12) thermoelectric materials with in situ forming nanostructured
Thermoelectric properties of Gd, Y co-doped Ca(3)Co(4)O(9+delta)
Thermoelectric properties of nonstoichiometric PbTe prepared by HPHT
Unique nanostructures and enhanced thermoelectric performance of melt-spun BiSbTe alloys
Low thermal conductivity and improved figure of merit in fine-grained binary PbTe thermoelectric all
Nanostructured bulk Yb(x)Co(4)Sb(12) with high thermoelectric performance prepared by the rapid soli
HPHT synthesis and thermoelectric properties of CoSb(3) and Fe(0.6)Co(3.4)Sb(12) skutterudites
Solvothermal synthesis and thermoelectric properties of skutterudite compound Fe(0.25)Ni(0.25)Co(0.5
Novel route to synthesise gamma-Na(x)Co(2)O(4) crystals with stacked layer-by-layer nanostructure
High thermoelectric performance BiSbTe alloy with unique low-dimensional structure
Formation and Growth Mechanism of Highly Tiled gamma-Na(x)Co(2)O(4) Crystals by a Novel Sodium Algin
Thermoelectric properties of quaternary Mg(2)Sn(0.4)Si(0.6-x)Ge(x) alloys
Enhanced thermoelectric performance of AgSbTe(2) synthesized by high pressure and high temperature
Composites of Higher Manganese Silicides and Nanostructured Secondary Phases and Their Thermoelectri
Microstructure and Thermoelectric Properties of Yb-Filled Skutterudites Prepared by Rapid Solidifica
Exploring the doping effects of Ag in p-type PbSe compounds with enhanced thermoelectric performance
Effects of double filling of Pb and Ba on thermoelectric properties of Pb(x)Ba(y)Co(4)Sb(11.5)Te(0.5
Nanostructures in High Performance Thermoelectric Materials (GeTe)x(AgSbTe2)100-x
Thermoelectric properties of Yb0.15Co4Sb12 based nanocomposites with CoSb3 nanoinclusions
Crystallization kinetics of Si15Te85 and Si20Te80 chalcogenide glasses
Rapid preparation method of bulk nanostructured Yb(0.3)Co(4)Sb(12+y) compounds and their improved th
The effects of In isoelectronic substitution for Ga on the thermoelectric properties of Sr(8)Ga(16-x
In situ synthesis and thermoelectric properties of La-doped Mg(2)(Si, Sn) composites
High figures of merit and natural nanostructures in Mg(2)Si(0.4)Sn(0.6) based thermoelectric materia
Preparation and thermoelectric properties of high-performance Sb additional Yb(0.2)Co(4)Sb(12+y) bul
HPHT synthesis and electrical properties of AgSbTe2-Ag2Te thermoelectric alloys
Growth mechanism of layer-by-layer nanostructured gamma-NaxCO2O4 hexagonal crystals via a novel prot
La掺杂n型Mg2Si基半导体的热电性能研究
基于三维有限元法模拟分析六面顶顶锤的热应力
高长径比柱状金刚石的高温高压合成与机理研究
基于有限元法分析宝石级金刚石的合成腔体温度场
新型圆角式高压碳化钨硬质合金顶锤的有限元分析
高压下国产六面顶压机铰链梁和工作缸的应力分析
镍基合金制备PDC复合界面特性研究
Ba填充方钴矿化合物的高压合成及热电性能
Ba_（0.32）Co_4Sb_（12-x）Te_x的高压合成及其电学性质
热电材料PbTel-xSex的高压制备及电学性能研究
高压合成La填充型CoSb_3方钴矿热电材料及其电输运性能
高压合成AgSbTe2-Sb2Te3的热电性能研究
Co4Sb12-xSex的高温高压合成及电学输运性能研究
Li3N—hBN体系中引入调节剂对合成cBN的影响
In_（0.3）Co_4Sb_（12-x）Se_x方钴矿热电材料的制备和热电性能
熔体旋甩法合成n型（Bi0.85Sb0.15）2（Te1-xSex）3化合物的微结构及热电性能
熔体旋甩法制备p型填充式方钴矿化合物Ce0.3Fe1.5Co2.5Sb12的微结构及热电性能
悬浮熔炼制备Half-Heusler合金Zr1-xTixNiSn0．975Sb0.025及其热电性能
熔体旋甩工艺对Zn掺杂Ⅰ-型Ba8Ga12Zn2Ge32笼合物微结构及热电性能的影响
快速凝固法制备ZrNiSn基Half-Heusler热电材料的微结构
Ag2Te掺杂对p型Bi0.5Sb1.5Te3块状合金热电性能的影响
熔融旋甩制备Ce_（0.8）Fe_（4-x）Ni_xSb_（12）方钴矿的热电性能研究
Yb／Sr双原子复合填充的I-型YbxSr8-xGa16Ge30笼合物的合成及热电性能
熔体旋甩工艺对n型InSb化合物的微结构及热电性能的影响
In掺杂对n型方钴矿化合物的微结构及热电性能的影响规律
Na填充型方钴矿化合物CoSb3的高压合成及电输运特性研究
Mg2Si1-xSnx（0≤x≤1）化合物的低温固相反应合成与热电性能研究
PbI2掺杂对高温高压合成PbTe1．04合金电学性质的影响
Dependence of nitrogen concentration in type Ib diamonds on synthesis temperature
球状石墨的粉压成型及以其为原料的金刚石生长
Synthesis of high quality type-Ib diamond crystals in carats grade
Effects of Ti additive on HPHT diamond synthesis in Fe-Ni-C system
Doping effect on thermoelectric properties of nonstoichiometric AgSbTe_2 compounds
Thermoelectric properties of quaternary Mg2Sn0.4Si0.6-xGex alloys
Phase transition and high temperature thermoelectric properties of copper selenide Cu2-xSe （0 ≤ x ≤ 0.25）
制备工艺对N型Bi2Te（2.4）Se（0.6）合金热电性能的影响
Effects of a carbon convection field on large diamond growth under high-pressure high-temperature conditions
Influence of annealing treatment on as-grown Ib-type diamond crystal at a high temperature and high pressure
金刚石烧结体残余应力的Raman表征
期刊信息
  • 《高压物理学报》
  • 北大核心期刊（2011版）
  • 主管单位:四川省科学技术协会
  • 主办单位:中国物理学会 高压物理专业委员会 四川省物理学会
  • 主编：邹广田
  • 地址：四川省绵阳市919信箱110分箱
  • 邮编：621999
  • 邮箱：gaoya@caep.cn
  • 电话：0816-2490042
  • 国际标准刊号：ISSN：1000-5773
  • 国内统一刊号：ISSN：51-1147/O4
  • 邮发代号:62-132
  • 获奖情况:
  • 中国物理类核心期刊,EI、CI收录期刊,中国期刊方阵“双效”期刊
  • 国内外数据库收录:
  • 美国化学文摘（网络版）,荷兰文摘与引文数据库,日本日本科学技术振兴机构数据库,中国中国科技核心期刊,中国北大核心期刊（2004版）,中国北大核心期刊（2008版）,中国北大核心期刊（2011版）,中国北大核心期刊（2014版）,中国北大核心期刊（2000版）
  • 被引量:3617