欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
采用激光熔化沉积快速制造工艺直接成形Ti-6Al-2Zr—Mo—V合金板材。激光熔化沉积过程中合金粉末充分熔化并在液态均匀混合以得到成分均匀、全致密的组织。SEM分析表明，激光沉积Ti-6Al-2Zr-Mo—V合金具有均匀细小的α／β双相片层组织，且片层取向随机多样，分布均匀。其组织特点与激光沉积过程中的快速凝固和固态相变有关。解释了其特征组织的形成机理，并讨论了其沉积层组织特征对性能的影响。
英文摘要：
Laser melting deposition （LMD） process was used to fabricate Ti-6Al-2Zr-Mo-V alloy directly. The metal powders were continuously melted and rapidly solidified layer upon layer directly into the near-net shape structure. The elements were fully melted and uniformly mixed in the molten pool that homogenized dense microstructure was obtained. Laser deposited Ti-6-Al-2Zr-Mo-V is characterized by a fine α/β lamellar microstructure with various random orientations, which should be related to the rapid solidification and phase transformation during the process. The influence of deposition layer on the fatigue strength is discussed.
同期刊论文项目
同项目期刊论文
Microstructure and hot corrosion behaviors of a gamma-toughened Cr13Ni5Si2/Cr3Ni5Si2 ternary metal s
Hot corrosion behaviors of a Cr13Ni5Si2-based metal silicide alloy in Na2SO4+25 wt.% K2SO4 and Na2SO
Microstructure and mechanical properties of rapid directionally solidified Ni-base superalloy Rene'4
High temperature mechanical properties of a laser melting deposited TiC/TA15 titanium matrix composi
Deformation Behavior in High-Frequency Fatigue Failure of Laser Melting Deposited Ti-6Al-2Zr-Mo-V Al
Microstructure and Tribological Property of Laser Melt Deposited alpha/Fe9Cr9Si2 Metal Silicide Allo
Effect of Annealing Temperatures on Microstructure and Mechanical Properties of Laser Melting Deposi
Microstructure and mechanical properties of directional rapidly solidified Ni-base superalloy Rene95
Microstructure and electrochemical characterization of laser melt-deposited Ti2Ni3Si/NiTi intermetal
Corrosion behaviors of a gamma-toughened Cr13Ni5Si2/Cr3Ni5Si2 multi-phase ternary metal silicide all
CORROSION BEHAVIORS OF Ni BASE SOLID SOLUTION-TOUGHENED Cr13Ni5Si2 ALLOY IN Cl- CONTAINING SOLUTIONS
Microstructure and dry sliding wear resistance of laser clad TiC reinforced Ti-Ni-Si intermetallic c
Microstructural characterization and dry sliding wear resistance of MoO2-strengthened gamma/NiMo all
Microstructure and tensile properties of laser melting deposited TiC/TA15 titanium matrix composites
Solidification microstructure and mechanical properties of corrosion-resistant ultrahigh strength st
Influence of Ni content on the microstructure and dry sliding wear properties of Cr13Ni5Si2/gamma in
Microstructure and wear resistance of laser melted Ti5Si3-TiCo-Ti2Co multiphase intermetallic alloys
期刊信息
位置：