欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
利用铜模铸造法制备（La0.6Ce0.4）65Al10Cu25块体非晶合金,通过X射线衍射和差示扫描量热法对该非晶合金的热稳定性和晶化行为进行研究。利用J-M-A方程对其等温晶化动力学进行分析,该合金平均Avrami指数在2.39～3.38之间。区域Avrami指数n（x）分析表明,晶化初期n（x）趋于3;晶化中期阶段,n（x）由2.5变化到3.5,在此过程中,当2.5〈n〈3时,新相长大,形核率增加,当3〈n〈3.5时,新相继续长大,形核率降低;晶化末期,n（x）趋于4,表明晶化过程是形核速率恒定和长大速率恒定的过程。
英文摘要：
（La 0.6 Ce 0.4） 65 Al 10 Cu 25 bulk metallic glasses（BMGs） were prepared by copper-mold casting.The crystallization behavior and thermal stability of（La 0.6 Ce 0.4） 65 Al 10 Cu 25 were investigated by X-ray diffraction and differential scanning caloricity（DSC）.The isothermal kinetics was evaluated by the Johnson-Mehl-Avrami equation.The calculated Avrami exponents were in the range of 2.39 to 3.38.The average values of local Avrami exponents show that the value of n is about 3 at the initial stage;in the middle crystallization stage,the value of n changes from 2.5 to 3.5.In this stage,for 2.5n3,the new crystallite phase grows up and the nucleation rate increases;while,for 3n3.5,the new crystallite phase continues to grow up and the nucleation rate decreases.In the final stage of crystallization,the value of n is close to 4,implying that the phase transformation occurs in a three-dimensional mode with a constant nucleation rate and a constant growth rate.
同期刊论文项目
同项目期刊论文
Responses of bone-forming cells on pre-immersed Zr-based bulk metallic glasses: Effects of compositi
Composition design for Laves phase-related body-centered cubic-V solid solution alloys with large hy
Effect of cooling rate on microstructure and mechanical properties of rapidly solidified Al-based bu
Correlation between local structure of melts and glass forming ability for Fe70EM10B20 (EM = early t
Revelation of solid solubility limit Fe/Ni=1/12 in corrosion resistant Cu-Ni alloys and relevant clu
Correlation between viscous-flow activation energy and phase diagram in four systems of Cu-based all
CLUSTER-PLUS-GLUE-ATOM MODEL AND COMPOSITION DESIGN OF BCC Ti-Mo-Nb-Zr SOLID SOLUTION ALLOYS WITH LO
Studies on the formability of Al-based metallic glasses/nanocomposites based on isochronal DSC analy
The featured local structural units in liquid Al80Si15P5 alloy and their relationship with Si modifi
Evaluation of liquid fragility and thermal stability of Al-based metallic glasses by equivalent stru
Real time synchrotron radiation studies on metallic glass (Zr0.55Al0.1Ni0.05Cu0.3)(99)Y-1 after cold
EFFECT OF COEXISTENCE OF SIMILAR ELEMENTS La AND Ce ON FORMATION OF (La-Ce)-Al-Cu BULK METALLIC GLAS
Correlation between local structure of melts and glass forming ability for Al-based alloys: A first-
Formation and mechanical properties of ductile Fe-based amorphous alloys using a cast iron with mino
Formation and thermal stability of Cu-Zr-Al-Er bulk metallic glasses with high glass-forming ability
期刊信息
位置：