位置：成果数据库 > 期刊 > 期刊详情页
Numerical Investigation on Water Flow in Engine Cooling-water Jacket
  • ISSN号：1022-6680
  • 期刊名称：Advanced Materials Research
  • 时间：2013
  • 页码：689-692
  • 相关项目：柴油机空穴湍流初次雾化机理及喷雾模型的研究
作者： He Zhixia|Liang Zhang|Zhaochen Jiang|Zhuang Shao|
同期刊论文项目
柴油机空穴湍流初次雾化机理及喷雾模型的研究
期刊论文 61 会议论文 28 获奖 12 专利 8 著作 1
同项目期刊论文
Visualization experiment and numerical simulation for cavitating flow in a diesel injector nozzle
空气滤清器的空气动力学仿真及优化
EFFECT OF NOZZLE HOLE SIZE COUPLING WITHEXHAUST GAS RE-CIRCULATION ON THE ENGINE EMISSIONPERFORMANCE
Visualization experiment on cavitating flow of different length-diameter ratios using diesel and bio
Experimental study of flow regime characteristics in diesel multi-hole nozzles with different struct
Effect of nozzle geometrical and dynamic factors on cavitating and turbulent flow in a diesel multi-
Experimental study of hydraulic flip phenomenon inside diesel nozzlesusing diesel and biodiesel
不同燃油温度喷嘴内部流动可视化试验
柴油机喷嘴内部空穴临界初生现象的试验研究
A numerical study of the effects of injection rate shape on combustion and emission of diesel engine
Numerical simulation of the hydrodynamic cavitation of the impinging streams mixer
Experimental study of hydraulic flip phenomenon inside diesel nozzles using diesel and biodiesel
Numerical study of effect of injection parameters on combustion and emission performance of a direct
不同比例放大倍数喷嘴内空穴流动的试验研究
Experimental and numerical study of cavitation inception phenomenon in diesel injector nozzles
Study of the effect of nozzle hole shape on internal flow and spray characteristics
STUDY ON EFFECT OF FUEL INJECTION STRATEGY ON COMBUSTION NOISE AND EXHAUST EMISSION OF DIESEL ENGINE
船用柴油机实现低NO_x燃烧的数值模拟
高效反烧式生物质成型燃料锅炉的设计与研究
Measurement of Diesel Nozzle Geometry with X-Ray Phase Contrast Imaging Technique
豆油甲酯/柴油混合燃油喷雾特性的试验
柴油机喷嘴内部流动可视化试验
多孔孔板水力空化可视化与数值模拟
柴油机喷嘴结构对喷雾特性影响的耦合模拟研究
Diesel nozzle geometries on spray characteristics with a spray model coupled with nozzle cavitating
柴油与生物柴油不同长径比喷嘴内空穴流动的试验
大深宽比双T形微通道内液-液两相流可视化研究
柴油喷雾近场初次破碎微观特性可视化试验研究
基于背压的柴油机喷嘴内部空穴流动试验研究
Experimental study of cavitating flow inside vertical multi-hole nozzles with different length-diame
Study on methane HCCI combustion process of micro free-piston power device
Experimental study of cavitating flow inside enlarged transparent injector nozzles and its effect on
Numerical investigation and experiment OFA single seaweed particle combustion in fluidized bed
An experimental investigation of cavitating flow in diesel injector nozzle under different back pres
Numerical study on effect of injection rates on combustion and emission performance
Measurement of Thermal Conductivity of Liquid based on Transient Double-hot wire Technique
An investigation of transient nature of the cavitating flow in injector nozzles
柴油机瞬态喷雾特性及喷油器后滴油现象试验研究及分析
交叉孔喷油嘴内部流动特性的模拟
喷油器带毛刺喷孔的喷雾特性试验
Influence of internal cavitating flow of the nozzle on spray characteristics in a diesel engine
Numerical investigation of effect pilot injection on combustion noise and exhaust emission of diesel
喷油策略对柴油机燃烧噪声及排放影响的模拟研究
针阀运动对柴油机喷嘴瞬态流动特性的影响
Flow field analysis of pulse converter exhaust manifold of diesel engines
柴油喷孔内云空化的试验和大涡模拟
喷孔锥度对内流及喷雾影响的试验研究
缸内高压直喷柴油/天然气喷射混合过程分析
双燃料直喷发动机喷孔几何位置对燃烧排放的影响
柴油机喷嘴喷孔非对称结构对近场喷雾特性的影响
天然气柴油双燃料发动机内部燃料混合模拟研究
燃油温度对柴油喷射过程影响的试验
基于背压的柴油机喷嘴内部空穴流动试验研究
柴油机原型喷嘴内瞬态流动的特性试验
天然气/柴油双燃料发动机研究现状分析
柴油机喷嘴空蚀特性研究进展