位置：成果数据库 > 期刊 > 期刊详情页
A FEM and Experiment Study on High Speed Machining of Nickel-based Superalloy GH4169
  • 时间：0
  • 相关项目：基于力－热耦合作用的难加工高速切削物理建模与仿真研究
同期刊论文项目
基于力－热耦合作用的难加工高速切削物理建模与仿真研究
期刊论文 45 获奖 1
同项目期刊论文
Analysis on Finish Hard Turning of Ti-6_5Al-3_5Mo-1_5Zr-0_3Si Alloy
Study on the Effect of Grinding Parameters to the White Layer Formation in Grinding SKD-11 Hardened
Fundamentals of BK7 glass removal in micro/nano-machining
A FEM study on residual stresses induced by high-speed end-milling of hardened steel SKD11
Optimization of Surface Roughness by Uniform Design of Experiments in Milling of 1Cr18Ni9Ti.
Study on the Surface Topography and Residual Stress for Dry Turning of GH80A.
Study on the Residual Stress Induced by Dry Turning of Buttress Thread.
Statistical research on the effects of cutting edge preparation on face milling of austenitic stainl
FEM analysis and experimental study on residual stress induced by form-milling and rolling of rotor
Study on Burr Formation in Face Milling of Stainless Steel with Chamfered Cutting Tool
A FEM Study on Chip Formation in Orthogonal Turning Nickel-based Superalloy GH80A
Surface Integrity in Machining SKD11 for Die and Mold
Experiment on Surface Integrity of Milling Tool for Hardened Steel SKD11
A FEM and Experimental Study of Chip Formation in Orthogonal Cutting of Superalloy GH80A
Cutting Forces in High Speed Tapping Cast Iron by Tungsten Carbide Taps
4Cr16Mo模具钢立铣加工过程中的切削力系数
基于平均切削厚度钛合金TC4铣削机理的试验研究
Mechanism of chip deformation in orthogonal cutting the wheel steel
Residual stress prediction by adaptive neuro-fuzzy system in milling aluminum alloy
新型低碳硫系易切削钢切削性能试验研究
铣削和磨削淬硬钢 SKD11的表面完整性比较研究
铝合金槽铣中毛刺形成机理与控制方法研究
Experimental study on the hardened surface layer of grinding SKD-11 hardened steel
Experiment of Optimum Geometry Structure of Milling Tools for Hardened Steel SKD11
新型涂层刀具干式铣削加工SKD11切削性能研究
奥氏体不锈钢平面铣削切削力和表面粗糙度试验研究
立铣加工动态切削力预测新方法及应用
剪切温度对车削加工GH4169镍基高温合金的影响
Study on surface damages caused by turning NiCr20TiAl nickel-based alloy
On Saw-tooth Chip Formation in High Speed Cutting GH4169
Development and experiment of new AlTiN coated drills for high efficiency dry drilling of 40Cr
Study on the Machinability of Two Different Sulfur Free Cutting Steels.
Finite element simulation on face milling of austenitic stainless steel with chamfered tools
Machinability Evaluation of TC11 Titanium Alloy in Finish Hard Turning Based on the Response Surface
Optimization Studies on Hole Making Tools for High Performance Cutting Austenitic Stainless Steel
新型F92铁素体耐热钢的铣削加工性能
铝合金槽铣中毛刺形成机理与控制方法
铣削和磨削淬硬钢SKD11的表面完整性比较
基于平均切削厚度钛合金TC4铣削机理
新型低碳硫系易切削钢切削性能试验
新型AlTiN涂层钻头高效干式钻削40Cr的开发与试验
铣削淬硬模具钢SKD11铣削表面质量试验研究
硬质合金丝锥在铸铁高速攻丝中的切削力分析
用于高硬度模具钢SKD11的铣刀几何角度优化及试验