为了弥补现有氧化物TFT的行驱动电路输出模块在功率消耗、响应速度、输出摆幅等方面的不足,提出了基于二次耦合的直流输出模块,并由此研究设计新的行驱动电路拓扑。仿真结果表明,该输出模块具有驱动能力强、响应速度快等优点。最后,基于刻蚀阻挡层(ESL)结构的氧化物TFT工艺,在玻璃衬底上成功制备了该行驱动电路,实测单级功耗为325μW。
The gate driver integrated by metal oxide thin film transistors is able to lower the cost of driving ICs and narrow the bezel of display panel,but there are some disadvantages like poor power efficiency,slow response speed and small output swing for the existing output modules. In order to solve these problems,a novel twice-bootstrap DC output module was proposed,and a new gate driver topology was designed based on this module. The simulation results show that the circuit has strong driving ability and fast response speed. Finally,the gate drivers were successfully fabricated on glass substrate integrated by MOTFTs with etch stop layer structure. The power consumption of single stage of the gate driver is 325 μW.