位置：成果数据库 > 期刊 > 期刊详情页
Colloidal-sol gel derived biphasic FHA/SrHA coatings
  • ISSN号：0257-8972
  • 期刊名称：Surface and Coatings Technology
  • 时间：2012.8.8
  • 页码：608-613
  • 相关项目：特种粉末冶金材料应用基础研究
作者： Yin, Ping|Feng, FangFang|Lei, Ting|Jian, XinChun|
同期刊论文项目
特种粉末冶金材料应用基础研究
期刊论文 181 会议论文 3 专利 16
同项目期刊论文
热处理对Fe基非晶合金涂层的相组成及摩擦磨损行为的影响
热喷涂Fe基非晶合金涂层的微观结构与摩擦磨损行为
Osteoblastic cell response on biphasic fluorhydroxyapatite/strontium-substituted hydroxyapatite coat
Experimental investigation and thermodynamic modeling of the Mg-Si-Zn system
Room temperature nanoindentation creep of nanocrystalline Cu and Cu alloys
Synthesis and optical property of ultra-long alpha-Si3N4 nanowires under superatmospheric pressure c
Fabrication of tungsten carbide-vanadium carbide core-shell structure powders and their application
Experimental investigation and thermodynamic calculation of the Fe-Mg-Mn and Fe-Mg-Ni systems
Preparation and thermal stability of MAed ODS ferretic steels
Thermodynamic assessment of the Cd-X (X= Sr, Ti, B, V) systems
Influence of TaCl5 partial pressure on texture structure of TaC coating deposited by chemical vapor
A thermodynamic description of the Co-Cr-Ti ternary system over the entire composition and temperatu
Development of an atomic mobility database for disordered and ordered fcc phases in multicomponent A
Thermodynamic description of the Al-Mg-Si system using a new formulation for the temperature depende
Experimental Investigation and Computer Simulation of Gradient Zone Formation in WC-Ti(C,N)-TaC-NbC-
CSUTDCC1-A thermodynamic database for multicomponent cemented carbides
Chlorine adsorption on Mg, Ca, and MgCa surfaces
Photosan-II loaded hollow silica nanoparticles: Preparation and its effect in killing for QBC939 cel
Effect of Cr and Yb additions on microstructure and properties of low copper Al-Zn-Mg-Cu-Zr alloy
Effect of calcium on the electrochemical behavior of lithium anode in LiOH aqueous solution used for
锆钛酸铅压电纤维及其复合材料的制备与表征
Growth of pyrocarbon by multi-physics fields chemical vapor infiltration
Facile synthesis of Ag/AgVO3 hybrid nanorods with enhanced electrochemical performance as cathode ma
Facile synthesis of beta-AgVO3 nanorods as cathode for primary lithium batteries
Effect of Zr, Cr and Pr additions on microstructures and properties of ultra-high strength Al–
NiFe2O4-NiO复合陶瓷的熔盐腐蚀行为
Thermodynamic Modeling of the La-B and La-Bi Systems Supported by First-Principles Calculations
Experimental investigation and thermodynamic assessment of the Hf-Ge system
Atomic mobilities and diffusivities in Al alloys
Effects of Zn impurities on the electronic properties of Pr doped CaTiO3
Thermodynamic description of the Ge-Na and Ge-K systems using the CALPHAD approach supported by firs
Thermal and thermo-mechanical properties of Ti-Al-N and Cr-Al-N coatings
梯度硬质合金梯度层形成的计算机模拟及验证
Effect of minor Cu addition on the precipitation sequence of an as-cast Al-Mg-Si 6005 alloy
Thermodynamic Optimization of the Sc-X (X = La, Li, Ca, Cr) Systems
Thermal stability and oxidation resistance of Ti-Al-N coatings
Investigation to impurity content and micromorphology of high purity titanium powder prepared by mol
Mechanical properties of a FeCuSiB alloy with amorphous and/or crystalline structures
Microstructures and mechanical properties of Fe-14Cr-3W-Ti-Y2O3 steel with 1 wt.% Cu addition fabric
TC18钛合金变形本构关系及其热轧过程有限元仿真的应用
Nb_2O_5掺杂NiFe_2O_4陶瓷材料的显微结构和导电性能
17(Cu-10Ni)-(NiFe_2O_4-10NiO)基金属陶瓷在铝电解过程中的相演变(英文)
电泳-预氧化扩散处理法制备NiO/NiFe_2O_4涂层及其形成机制
Preparation of Nickel Ferrite-Copper Composite by Pressureless Infiltration
基体梯度结构对TiN涂层硬质合金力学和切削性能的影响
Effects of spin-orbit coupling on various properties of hafnium dihydride
Ideal mechanical strength and interface cohesion property of Ir-base superalloys from first principl
原位生长碳纳米管对化学气相沉积SiC涂层的影响
MgO/Mg生物复合材料的制备及其腐蚀行为
Mo、V和Ag对粉末冶金Ti-5Al合金组织与力学性能的影响
显微组织对Ti-Al-Cr-Nb合金力学行为的影响
CoO掺杂对15(20Ni-Cu)/(NiO-NiFe_2O_4)金属陶瓷导电性能的影响
沉积温度对CVD-HfC涂层微观结构和力学性能的影响
Effect of MWCNTs Additive on Desorption Properties of Zn(BH4)(2) Composite Prepared by Mechanical Al
Effects of Ca on microstructure, mechanical and corrosion properties and biocompatibility of Mg-Zn-C
Fabrication of In Situ TiBCSi Composite by Hot-Press Sintering
Microstructural Evolution of a Nickel Ferrite-Copper Alloy Cermet During Sintering and High-Temperat
Effects of debinding atmosphere on the microstructure and sintering densification of nickel ferrite
Fe2O3团粒还原制备中空铁颗粒
Innovative processing of high-strength and low-cost ferritic steels strengthened by Y-Ti-O nanoclust
Effect of Mo and Co additions on the microstructure and properties of WC-TiC-Ni cemented carbides
Controllable synthesis of Ni-catalyzed tetragonal tungsten nanowires via chemical vapor deposition
Tortuosity factor for porous FeAl intermetallics fabricated by reactive synthesis
The effects of side groups on the electronic transport properties of carbon chain molecular devices
Effects of partial hydrogenation on electronic transport properties in C60 molecular devices
熔盐电解法制取金属钛用TiO_2电极片
Effect of tungsten content on microstructure and quasi-static tensile fracture characteristics of ra
Microstructure characterization of NiFe2O4-NiO solid-solid diffusion couple
A study of nanoscale Al-3(Zr,Yb) dispersoids structure and thermal stability in Al-Zr-Yb alloy
Interdiffusivities and atomic mobilities in fcc Cu-Al-Fe alloys
A thermodynamic reassessment of the Si-Sr system
Thermodynamic optimization of the Li-Mg and Al-Li-Mg systems
Preparation and ablation properties of Hf(Ta)C co-deposition coating for C/C composites
等温自由锻温度对7085铝合金组织与性能的影响
热变形温度和淬火速率对7085铝合金组织和性能的影响
硬质合金基体对涂层刀具高速切削镍基高温合金切削性能的影响
Synthesis and characterization of superhydrophobic functionalized nanoparticle arrays on aluminum su
Preparation of Super-Hydrophobic Aluminum by a Novel Immersion Method using Potassium Permanganate S
Mechanical and structural stability of zirconium dihydride
Phase stability, mechanical property, and electronic structure of an Mg-Ca system
Structural stability, mechanical property and elastic anisotropy of TiAl-H system
Structural evolution and ablation mechanism of a hafnium carbide coating on a C/C composite in an ox
Experimental investigation and thermodynamic modeling of the Cu-Si-Zn system with the refined descri
Assessment of atomic mobilities in fcc Cu-Ni-Zn alloys
Self-Diffusion Coefficient of fcc Mg: First-Principles Calculations and Semi-Empirical Predictions
THERMODYNAMIC MODELING OF THE Fe-Zn SYSTEM USING EXPONENTIAL TEMPERATURE DEPENDENCE FOR THE EXCESS G
Influence of Zr on structure, mechanical and thermal properties of Ti-Al-N
Improved properties of Ti-Al-N coating by multilayer structure
First-principles study of the critical thickness in asymmetric ferroelectric tunnel junctions
Thermodynamic reassessment of the Al-Cr-Si system with the refined description of the Al-Cr system
Thermodynamic evaluation of the C-Ta-Ti system and extrapolation to the C-Ta-Ti-N system
Ti-5Al-5Mo-5V-1Cr-1Fe合金热加工图及其组织演变
Ti-5Al-5Mo-5V-1Cr-1Fe合金的高温塑性变形行为
Relationship between lamellar alpha evolution and flow behavior during isothermal deformation of Ti-
Effects of Zn on microstructure, mechanical properties and corrosion behavior of Mg-Zn alloys
Nanoindentation creep of Al2O3 reinforced copper based composites
Effect of heat treatment on strength, exfoliation corrosion and electrochemical behavior of 7085 alu
Effect of quenching rate on microstructure and stress corrosion cracking of 7085 aluminum alloy
First-principles calculations of binary Al compounds: Enthalpies of formation and elastic properties
Structure and thermodynamics of the key precipitated phases in the Al-Mg-Si alloys from first-princi
An overview on phase equilibria and thermodynamic modeling in multicomponent Al alloys: Focusing on
Native defects and Pr impurities in orthorhombic CaTiO3 by first-principles calculations
Development of an atomic mobility database for liquid phase in multicomponent Al alloys: focusing on
Ti-Cu-Nb合金钎料的制备及其在SiC表面润湿性的研究
Ti-25Cu-15Ni钎料钎焊的TA0钛接头界面微观组织及拉伸性能
Fiber/matrix interfacial shear strength of C/C composites with PyC-TaC-PyC and PyC-SiC-TaC-PyC multi
冷态输送ZrCl_4低压化学气相沉积ZrC涂层的制备
铝基复合金属粉末钎焊石墨的界面结构及性能
P_yC/SiC/TaC界面对三维细编C_f/C复合材料力学性能的影响
三元ZrCrV吸气化合物粉末的制备和表征
梯度分布TaC界面改性C/C复合材料的微观结构与力学性能
Tensile creep behavior of heat-treated TC11 titanium alloy at 450-550 degrees C
Preparation of ultrafine Ti powder by inhibitor coated/HDH combined method
Sol-hydrothermal synthesis and optical properties of Eu3+, Tb3+-codoped one-dimensional strontium ge
Flower-like hydroxyapatite modified carbon paste electrodes applicable for highly sensitive detectio
Interdiffusivities and Atomic Mobilities in fcc Ni-Cu-Si Alloys
Experimental investigation and computational study of atomic mobility in fcc ternary Co–Cr&nda
Comparison of microstructure and mechanical properties of Co-based and Fe-based alloy coatings depos
Thermodynamic assessment of the Ga-X (X=B, Ca, Sr, Ba) systems supported by first-principles calcula
Effects of Cu content on the precipitation process of Al-Zn-Mg alloys
Effect of heat treatment on hot deformation behavior and microstructure evolution of 7085 aluminum a
Native defects in LiNH2: A first-principles study
7085铝合金的热变形组织演变及动态再结晶模型
Ablation behavior of HfC protective coatings for carbon/carbon composites in an oxyacetylene combust
Ternary diffusion in Cu-rich fcc Cu-Al-Si alloys at 1073 K
Thermodynamic modeling of the Ge-Ti system supported by key experiment
高强韧Mo-0.1Zr合金的制备、性能及组织
Preparation of ultrafine WC-10Co composite powders by reduction and carbonization
Fabrication of nano-structured super-hydrophobic film on aluminum by controllable immersing method
Effects of partial hydrogenation and vacancy defects on the electronic properties of metallic carbon
钛酸锶钡陶瓷的制备及介电性能
Microstructure and ablation behavior of hafnium carbide coating for carbon/carbon composites
Effects of Cu and Al on the crystal structure and composition of eta (MgZn2) phase in over-aged Al-Z
A thermodynamic modeling of the C-Cr-Ta ternary system
The corrosion behavior of porous Ni3Al intermetallic materials in strong alkali solution
Conversion of egg-shell to hydroxyapatite for highly sensitive detection of endocrine disruptor bisp
Temperature-dependent elastic stiffness constants of fcc-based metal nitrides from first-principles
On the corrosion behaviour of newly developed biodegradable Mg-based metal matrix composites produce
模压制备C/C-SiC复合材料的催化石墨化过程研究
Thermodynamic optimization of the Cu-Nd system
Thermodynamic modeling of the Hf-Sn and Sn-Y systems
Ab initio calculations and thermodynamic modeling for the Fe-Mn-Nb system
Thermodynamic Modeling of the Sr-M (M = Fe, Mn, Ni, Ti, V) Systems
95W-3.5Ni-1.5Fe合金高温性能、组织及断裂机制
碳化硅晶须对C/C复合材料表面SiC涂层的影响
C/C复合材料表面原位生长SiC_w的工艺
金属颗粒初始状态对10NiO-NiFe_2O_4基金属陶瓷烧结及导电性能的影响
Heat contents of the intermetallics V3Ge and V5Ge3 and thermodynamic modeling of the Ge-V system
常压化学气相沉积ZrC涂层动力学与组织结构
Thermodynamic modeling of the Sr-X (X=H, Li, Na, Sc) systems
低Al含量Ti-Al合金相变行为的分子动力学模拟
热处理对含C-SiC-TaC-C界面C/C复合材料力学性能的影响
Phase equilibria of the Cu-Ni-Si system at 700 degrees C
Diffusivities and atomic mobilities in the Al-Ce-Ni melts
固态输送ZrCl_4低压化学气相沉积制备ZrC涂层的特征
TC18钛合金盘件等温模锻过程有限元模拟及试验
Nb2O5掺杂NiFe2O4陶瓷材料的显微结构和导电性能
铁酸镍基金属陶瓷的强化烧结与熔盐腐蚀行为
热处理对超细晶Ti-55511近β钛合金显微组织和力学性能的影响
溶胶-球磨超细W—Cu复合粉末烧结性能研究
表面活性剂添加对超细98W-1Ni-1Fe粉末注射成形喂料流变行为的影响(英文)
醇–水混合溶剂凝胶注模制备SiC多孔陶瓷的工艺与性能
片状钛酸镁钾的制备及其去除污水中铜离子的应用（英文）
Preparation of ultrafine WC-10Co composite powders by reduction and carbonization