欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
为研究铁道车辆在非理想状态下的车轮磨耗行为，以C80型货车为例在SIMPACK中建立车辆一轨道系统动力学模型，基于轮轨半赫兹接触模型、KALKER简化理论和ZOBORY磨耗模型编制车轮磨耗仿真程序，对具有轮对安装偏转角和轮径差时的车轮磨耗行为进行仿真，得到车轮磨耗后的踏面形状、圆周磨耗和轮缘厚度，最后从车轮磨耗的角度分析转向架结构对车辆非理想状态的适应性。计算结果表明：安装偏转角‰和轮径差AD都会导致车轮磨耗寿命减少，~uo=l～3mrad时，段修磨耗寿命分别减少了64％、86．2％和93．3％，AD=-2~8ITffn时，段修磨耗寿命分别减少了24％、52．9％、62．1％和72．7％；轮对安装偏转角对车轮磨耗寿命的影响较大，而轮径差主要导致车轮出现偏磨；径向转向架由于前后轮对运动不独立，因此其对轮径差的适应性较摆动式转向架和交叉支撑转向架差。
英文摘要：
In order to research the wheel wear behaviour of the imperfect railway vehicle, the vehicle-track system dynamical model of C80 wagon is built in SIMPACK and the wheel wear simulation program is implemented based on the wheel/rail semi-hertzian contact model, KALKER＇s simplified theory and ZOBORY＇s wear model. Wheel wear behaviours of vehicles which have wheelset deflection angle and radius difference are simulated. Then the worn wheel profiles, wear depths in rolling circle and flange depths are obtained. At last, the adaptability of bogie structures to vehicle＇s imperfect state are investigated based on the wheel wear behaviour. The results indicate that both the wheelset deflection angle ψ0 and radius difference AD will reduce the wheel wear life, when ψ0 increases from 1 mrad to 3 mrad, the wheel wear life decreases 64%, 86.2% and 93.3%, and when AD increasesfrom 2 mm to 8 mm, the wheel wear life decreases 24%, 52.9%, 62.1% and 72.7%; the wheelset deflection angle mainly influences the wear life and the radius difference mainly leads to the wheel＇s eccentric wear; because of the dependence of the front and rear wheelsets in radial bogie, swing motion bogie and cross-braced bogie process are better adaptability than radial bogie when vehicles have radius difference.
同期刊论文项目
同项目期刊论文
期刊信息
位置：