欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
为探讨非设计点的气动性能,以某3级高负荷低反力度吸附式压气机首级超声速级作为研究对象,借助数值模拟的方法,分别研究了变转速、变抽吸量以及近失速点首级超声速级参数以及内部流场的变化.结果表明：变转速条件下,基于低反力度设计概念研制的吸附式压气机所采用的抽吸方案仍能适应设计要求;减少抽吸量,在降低本级气动性能的同时,增加了其与下一级流动匹配的难度;通过在端壁抽吸槽道前段添加附加抽吸槽道/孔可进一步拓宽吸附式压气机的工作范围.
英文摘要：
In order to explore the aerodynamic performance at off-design points,taking an supersonic first stage of three-stage highly-loaded low-reaction aspirated compressor as research objection,the variation of parameters and inner flow filed for an supersonic first stage operating at various speeds,aspiration mass flow rates,and near stall point were investigated by numerical simulations.As a result,the aspiration schemes of the aspirated compressor designed with the low-reaction concept can still meet the design demands at various speeds;the reduction of aspiration mass flow rate will not only decrease the stage aerodynamic performance,but also affect the matching with the next stage;the working range of aspirated compressor can be further broadened by adding additional aspirated slot/holes before the endwall aspiration slot.
同期刊论文项目
同项目期刊论文
patial discretization error in an artificial benchmark model of oblique laser incidence by finite vo
Analysis on capabilities of density-based solvers within Open FOAM to distinguish aerothermal variab
A Second Order Radiative Transfer Equation and Its Solution by Meshless Method with Application to S
Analysis on transient conjugate heat transfer in gap–cavity–gap structure heated by high speed airfl
Numerical simulation of infrared signature emitted by liquid rocket plume using wide band k-distribu
Effect of air temperature on combustion characteristics and NOx emissions from a 0.5 MW pulverized c
Experimental study of the impact of holes-typesuction on the flow characteristics in a high-load com
First-principles molecular dynamics study on temperature-dependent dielectric function of bulk 3C an
Temperature-dependent dielectric function of germanium in the UV-vis spectral range: A first-princip
Characterization of combustion and NOx emissions with respect to over-fire air damper opening in a d
Simulation of flow behavior of particles bycluster structure-dependent drag coefficient model for ch
An effective inversion algorithm for retrieving bimodal aerosol particle size distribution from spec
Study of topology and vortex structure in turbinecascades with tip clearance under differentincidenc
Effect of the anthracite ratio of blended coals on the combustion and NOx emission characteristics o
Experimental study on the characteristics of heat transfer and flow resistance in a turbulent pipe f
Evaluation on cold modeling flow field for a down-fired 600 MWe supercritical boiler with multi-inje
Modeling of a rotational supercavitating evaporator and geometrical characteristics of supercavity i
Annaland Martin van Sint．Hans Kuipers, Dongsheng Wen, Discrete particle modeling of granular tempera
A de？ciency problem of the least squares ？nite element method for solving radiative transfer in stro
Simulation of flow behavior of particles by cluster structure-dependent drag coefficient model for c
Aerodynamic characteristics within a cold small-scale model for a down-fired 350 MWe supercritical u
Numerical simulation of natural convection in a square enclosure filled with nanofluid using the two
Inner and Outer Secondary-Air Distance-Effect Study within a Cold Small-Scale Model of a New Down-Fi
New over-fire air arrangement and its air ratio optimization determined by aerodynamic characteristi
Experimental Study of the Impact of Hole-type Suction on the Flow Characteristics in a High-load Com
Influence of Additional Leading-Edge Surface Roughness on Performances in Highly Loaded Compressor C
Investigation of Positively Curved Blade in Compressor Cascade Based on Transition Model (DOI: 10.15
期刊信息
位置：