中文摘要：

以煤焦油沥青为碳源、纳米Fe（OH）_3为模板制备了一种三维石墨烯类多孔碳材料.通过测试氧还原性能,确定了最佳制备工艺：反应物煤沥青、纳米Fe（OH）_3、KOH的质量配比为6：8：4,热解温度为800oC.扫描电镜测试结果表明,制得的产品具有明显的孔结构且分布均匀.透射电镜测试结果进一步表明,产品具有泡沫状的多孔结构,高分辨透射电子显微镜照片表明,该产品具有多层的三维石墨烯结构.X射线衍射数据表明,在29o位置出现的衍射峰是多层石墨烯结构,42o位置的衍射峰说明产品具有一定程度的石墨化.由拉曼光谱结果计算I_G与I_（2D）的比值表明产品为多层石墨烯结构.X射线光电子能谱分析检测到的C元素含量约为88.7%,主要包含C—C键,图谱中未发现铁元素的存在,证明纳米Fe（OH）3模板已被洗净.根据比表面积测定可知,多孔碳的比表面积为2040m～2·g-1,孔径集中分布在10～400 nm,这与TEM测试得到的结果一致.在0.1 mol·L-1KOH中进行催化氧还原性能测试,起始还原电位为0 V（vs.Hg/Hg O）,电子转移数为3.58.测试结果表明,制得的三维石墨烯类多孔碳具有良好的催化氧还原性能.

英文摘要：

The 3D graphene type porous carbon was prepared using coal tar pitch as carbon source and nano Fe（OH）_3 as template.Optimal conditions for the catalytic oxygen reduction performance weredetermined as： the mass ratio of coal tar, nano Fe（OH）_3and KOH is 6：8：4; the pyrolysis temperature is 800 oC. SEM images show that the products have uniformly porous structure. TEM images demonstrate that the products are porous with foam shapes. HRTEM images further indicate that the products have formed several-layers 3D graphene structure, which are also supported by XRD and Raman data, and the pore size mainly distributes in 10 ～ 40 nm. XRD data show that the materials have a certain degree of graphitization. XPS spectra indicate that nano Fe（OH）_3template is washed out with no iron detected and C element content is about 88.7% mainly comprising C—C bond. BET results demonstrate that the specific surface area is 2040 m2·g-1, the pore size distribution concentrates in 10 ～ 40 nm which is consistent with the results obtained by HTEM. Electrochemical performances were tested in 0.1 mol·L-1 KOH, the initial reduction potential is 0 V（vs.Hg/HgO） and the electron transfer number is 3.58. Such low-cost, good performance material is potentially useful for oxygen reduction catalyst.