欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
按无过载离心泵设计要求,选择对复合叶轮离心泵性能影响比较关键的叶片出口安放角β2、叶片出口宽度b2、喉部面积Ft和短叶片进口直径Di的4个参数为变化因素按正交方案设计了9台复合叶轮离心泵模型。采用F luent全流场数值模拟方法对设计的9台模型泵进行正交试验,得到了各几何参数对复合叶轮离心泵各性能指标影响的主次顺序,并得出模型泵的最优设计方案。对最优设计方案的样机试验表明,全流场数值模拟方法的选优结果在实现无过载的同时,保持了较高效率,达到了试验目的。研究结果验证了全流场数值模拟正交试验选优的可行性。
英文摘要：
Based on the design requirements of non-overload centrifugal pump,blade outlet angle β2,blade outlet width b2,throat area Ft and the inlet diameter of short blade Di,all of which affects the performance of centrifugal pump with complex impeller were chosen to design nine centrifugal pump models with complex impeller.Numerical simulation of whole flow field based on Fluent was adopted to do orthogonal test,the important order of geometric parameters affect the performance of centrifugal pump with complex impeller.The best design scheme for pump model was acquired.Through the test of specimen of the best design scheme,it demonstrated that the excellent selection by using numerical simulation of whole flow field was non-overload and high efficiency.Orthogonal test based on numerical simulation of whole flow field was verified by the research result.
同期刊论文项目
同项目期刊论文
Application of different strategies of partitioned fluid-structure interaction simulation for a sing
Investigation of unsteady flow-induced impeller oscillations of a single-blade pump under off-design
Numerical Prediction of Unsteady Pressure Field Within the Whole Flow Passage of a Radial Single-Bla
Modeling Optimal Scheduling for Pumping System to Minimize Operation Cost and Enhance Operation Reli
Numerical Investigation on Fluid Structure Interaction Considering Rotor Deformation for a Centrifug
Numerical characterization of pressure instabilities in a vaned centrifugal pump under partload cond
Numerical and Experimental Study on Flow-induced Noise at Blade-passing Frequency in Centrifugal Pum
位置：