位置：成果数据库 > 期刊 > 期刊详情页
Mathematic model of solid fraction during rheo-casting by the cooling sloping plate process
  • 期刊名称：Acta Metallurgica Sinica (english Letters)
  • 时间：0
  • 页码：81-88
  • 分类：TG249.9[金属学及工艺—铸造] O141.4[理学—数学;理学—基础数学]
  • 作者机构：[1]College of Materials and Metallurgy, Northeastern University, Shenyang 110819, China
  • 相关基金：This work was financially supported by the National Natural Science Foundation of China （Nos.51034002 and 50974038） and National Program for Fundamental Research and Development of China （No.2011CB610405）.
  • 相关项目：镁合金连续流变挤压成形过程的界面凝固与摩擦机理
作者： Guan Renguo|Zhao Zhanyong|Huang Hongqian|Zhang Qiusheng|Liu Chunming|
关键词： 流变铸造, 数学模型, 倾斜板, 冷却过程, 固相分数, 浇注温度, 固相率, 工艺参数, Sloping plate, Rheo-casting, Mathematic model, Solid fraction, Parameter
中文摘要：

Corresponding author. Professor, PhD; Tel： ＋86 24 83681463. E-mail address： guanrg@smm.neu.edu.cn （Renguo GUAN）

同期刊论文项目
镁合金连续流变挤压成形过程的界面凝固与摩擦机理
期刊论文 64 会议论文 2 专利 2
剪切/振动耦合作用下半固态金属强流变成形
期刊论文 90 会议论文 1 专利 2 著作 1
同项目期刊论文
Superplasticity-Like Behavior, Microstructures and Deformation Mechanism Map in. Superlight Mg-6Li-3
石墨烯铝基复合材料的制备及其性能
浇注温度对AZ31镁合金连续流变挤压成形组织的影响
Fabrication of AZ31 alloy wire by continuous semisolid extrusion process
6201合金管材连续流变扩展挤压成形过程的数值模拟与实验研究
Effects of interfacial friction on the microstructures of magnesium-tin alloy during continuous rheo
Microstructure formation and mechanical properties in AZ31 alloy processed by continuous rheo-extrus
AZ31镁合金连续强流变轧制成形过程温度场模拟与优化
AZ31镁合金型材连续流变挤压成形过程的数值模拟
超轻α固溶体基Mg-6Li-3Zn合金的位错蠕变
长期时效对GH4586B合金组织及高温拉伸性能的影响
工艺条件对Mg-3Sn-Mn合金连续流变成形组织的影响
Effect of heat treatment on the microstructures and mechanical properties in AZ31 magnesium alloy pr
AZ91D半固态坯料的等温压缩变形研究
连续流变挤压与热处理对6201合金组织性能的影响
LZ63和LZ113合金板材室温力学性能与显微组织演变
WSP流变铸造与球化处理对Al-18％Si-5％Fe合金组织性能影响
超轻α固溶体基Mg-6Li-3Zn合金的位错蠕变
长期时效对GH4586B合金750℃和510MPa持久性能的影响
超轻β固溶体Mg-11Li-3Zn合金的准超塑性与变形机理
冷却倾斜板熔体处理过程边界层分布及流动传热的理论研究
Mg-3Sn-1Mn合金连续流变成形组织形成机理
倾斜板振动熔体处理技术研究与应用进展
电磁搅拌对Al-Ti-B线材微观组织的影响
波浪形流动与冷却过程中Al-18Si-xFe合金的组织形成机理
Effect of strip size on neutral angle during a novel semisolid shearing-rolling process
Heat transfer and grain refining mechanism during melt treatment by cooling sloping plate
Effect of microstructure on deformation behavior of Ti-6Al-4V alloy during compressing process
Effect of wavelike sloping plate rheocasting on microstructures of hypereutectic Al-18 pct Si-5 pct
Microstructure evolution and properties of Mg–3Sn–1Mn (wt%) alloy strip processed by sem
Melt flow type and physical model of semisolid rheo-casting process by cooling sloping plate
Electrodeposition of hydroxyapatite coating on Mg-4.0Zn-1.0Ca-0.6Zr alloy and in vitro evaluation of
Effects of process parameters on microstructure and properties of AZ91 alloy prepared by cooling/sti
波浪形振动倾斜板半连续铸造半固态AZ91D镁合金
Preparation of HA-coated Mg-4.0Zn-1.0Ca-0.6Zr(wt%) alloy and its biodegradation behaviors
基于电磁场与流场耦合的电沉积加工过程仿真
二次加热过程中半固态AZ31镁合金的显微组织演变
6201合金管材连续流变扩展挤压成形过程的数值模拟和实验研究
基于数值模拟的AZ31镁合金连续流变成形浇注温度的影响
Semisolid die forging process,microstructures and properties of AZ31 magnesium alloy mobile telephone shells
二次加热工艺对半固态Al-6Si-2Mg合金组织的影响
铝合金晶粒细化的研究进展与发展趋势
半固态合金强流变轧制单位轧制压力分布的数学模型和理论研究
WSP流变铸造与球化处理对Al-18%Si-5%Fe合金组织和性能的影响
带扩展腔的纯铝及铝钛硼合金连续挤压力的分析与实验研究（英文）
剪切/振动耦合作用下连续流变轧制成形A2017合金组织演化及动态凝固（英文）
Effects of the parameters of sloping plate process on microstructures of A2017 alloy
石墨烯铝基复合材料的制备及其性能
工艺条件对AZ91镁合金半固态流变轧制组织的影响
Preparation of HA-coated Mg-4.0Zn-1.0Ca-0.6Zr(wt.%) alloy and its biodegradation behaviors
Fabrication of AZ31 alloy wire by continuous semisolid extrusion process
AZ31镁合金连续强流变轧制成形过程温度场模拟与优化
Effects of technical parameters of continuous semisolid rolling on microstructure and mechanical pro
超轻β固溶体Mg-11Li-3Zn合金的准超塑性与变形机理
Microstructure and mechanical properties of Al-Mg-Sc alloy processed by semi-solid continuous castin
Effects of dynamic recrystallisation during deep rolling of semisolid slab and heat treatment on mic
Process parameter optimizing and studies on microstructure and properties of AZ31 alloy prepared by
The microstructure and tensile property of Mg-Zn-Ca-Zr alloy sheet coated with HA and its antihemoly
新型羟基磷灰石涂层镁合金生物学毒性及相容性观察
Microstructure formation mechanism and properties of AZ61 alloy processed by melt treatment with vib
In vitro degradation of four magnesium-zinc-strontium alloys and their cytocompatibility with human
Temperature distribution and its Influence on microstructure of AZ31 alloy during semisolid rheo-rol
A Novel Semisolid Rheo-rolling Process of AZ31 Alloy with Vibrating Sloping Plate
Microstructure and properties of Mg-3Sn-1Mn (wt.%) alloy processed by a novel continuous shearing an
Microstructure evolution and properties of Mg-3Sn-1Mn (wt.%) alloy strip processed by semisolid rheo
Boundary layer distributions and cooling rate of cooling sloping plate process
Mathematic model of rolling pressure during a semisolid shearing-rolling process
电沉积制备镁合金HA涂层的组织及其可降解性能
电沉积制备Mg-Zn-Ca-Zr合金HA涂层的研究
Microstructure formation mechanism of AZ31 magnesium alloy processed by rheo-forming
冷却倾斜板熔体处理过程边界层分布及流动传热的理论研究
Microstructure formation mechanism during a novel semisolid rheo-rolling process of AZ91 alloy
合金凝固过程中晶粒尺寸和形貌演变的预测
Simulation analysis of metal flow during extending extrusion semisolid AA2017 alloy
Microstructure and properties of Mg-3Sn-1Mn (wt. %) alloy processed by a novel continuous shearing a
Semisolid die forging process, microstructures and properties of AZ31 magnesium alloy mobile telepho
Mg-3Sn-1Mn合金连续流变成形组织形成机理
倾斜板振动熔体处理技术研究与应用进展
半固态合金强流变轧制单位轧制压力分布的数学模型与理论研究
电磁搅拌对Al-Ti-B线材微观组织的影响
波浪形流动与冷却过程中Al-18Si-xFe合金的组织形成机理
二次加热过程中半固态 AZ31 镁合金的显微组织演变
Microstructure Formation Mechanism and Properties of Mg-3Sn-1Mn (wt.%) Magnesium Alloy Processed by
Effects of the parameters of sloping plate process on microstructures ofA2017 alloy
Force analysis and experimental study of pure aluminum and Al-5%Ti-1%B alloy continuous expansion ex
Influence of parameters on microstructure of A356 alloy sheets processed by a novel rheo-rolling pro
<br class="p0"> 定向凝固<span>Ni</span><span>基熔覆涂层热震行为</span>
过共晶Al-Si合金初晶Si相的细化机理
Heat transfer and grain refining mechanism during melt treatment by cooling sloping plate
稀土对Al-3Ti-0.2C细化剂显微组织及细化性能的影响
Simulation of temperature field and metal flow during continuous semisolid extending extrusion proce
Development and Evaluation of a Magnesium-Zinc-Strontium Alloy for Biomedical Applications–Alloy Pro
预测多元合金形成焓的三组元作用模型
<span>修复损伤叶片熔覆涂层热腐蚀行为</span>
<br class="p0"> 近液相线铸造过程中近球形<span>α</span><span>相的形成机理</span&g
基于电磁场与流场耦合的电沉积加工过程仿真
二次加热过程中半固态AZ31镁合金的显微组织演变
6201合金管材连续流变扩展挤压成形过程的数值模拟和实验研究
Semisolid die forging process,microstructures and properties of AZ31 magnesium alloy mobile telephone shells
半固态合金强流变轧制单位轧制压力分布的数学模型和理论研究
WSP流变铸造与球化处理对Al-18%Si-5%Fe合金组织和性能的影响
修复损伤叶片熔覆涂层热腐蚀行为
Microstructure Formation Mechanism During a Novel Semisolid Rheo-rolling Process of AZ91 Magnesium Alloy
Process Parameter Optimizing and Studies on Microstructure and Properties of AZ31 Alloy Prepared by Semisolid Rolling Process
Effects of deformation parameters on formation of pro-eutectoid cementite in hypereutectoid steels
Microstructure and properties of A2017 alloy strips processed by a novel process by combining semisolid rolling, deep rolling, and heat treatment
工艺参数对连续流变轧制成形Mg-3Sn-1Mn合金板材组织和力学性能的影响（英文）
带扩展腔的纯铝及铝钛硼合金连续挤压力的分析与实验研究（英文）
Boundary Layer Distributions and Cooling Rate of Cooling Sloping Plate Process