欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
为改善双股射流碰撞雾化器的雾化性能,基于自行搭建的射流碰撞雾化实验台,采用CCD拍摄技术,研究射流速度、碰撞角度、喷嘴出口内径和黏度对雾化特征的影响.结果表明：随着射流韦伯数和碰撞角度的增大,喷雾角增大,液滴的索太尔平均直径（SMD）减小,且液滴分布更加均匀;喷嘴内径较小时形成的液膜厚度较薄,稳定性差,喷雾角较小,在所研究的范围内,液滴的平均直径不受喷嘴内径的影响;液体黏度越大,液膜越稳定不易破碎,液膜尺寸越大,喷雾角越小,液滴的平均粒径越大;在韦伯数较小时,差异明显,而在较高的韦伯数条件下,差距较小.在进行40%浓度甘油溶液雾化实验时,观察到了液膜翻转现象,从碰撞点往下出现连续多个相互垂直的液膜.因此,增大射流速度、碰撞角度,减小液体黏度,有助于改善雾化性能.
英文摘要：
To improving the atomization characteristics of dual impinging jets,based on the impinging jets platform established by ourselves,the effects of jet velocity,impingement angle,nozzle diameter and liquid viscosity on the atomization characteristics were studied by CCD Photography technology. The experimental results indicate that with the increase of Weber number and impingement angle,the spray angle is increased,droplet SMD is decreased and the droplet distribution is more uniform. When the nozzle diameter is small,the thickness of liquid sheet is small,the liquid sheet is unstable and the spray angle is small. The nozzle diameter has little influence on SMD. Besides,the larger the liquid viscosity,the more unstable of the liquid,the larger the liquid size,the smaller the spray angle and the larger the droplet SMD. When the Weber number is small,the difference is obvious and when the Weber number is large,the difference is smaller. Also,in the study of 40% concentration of glycerol solution atomization characteristics,the phenomenon of liquid sheet flip was observed,and multiple consecutive perpendicular liquid sheets could appear down from the impact point. In conclusion,increasing the jet velocity and impinging angle and decreasing the liquid viscosity can improve the atomization characteristics.
同期刊论文项目
同项目期刊论文
patial discretization error in an artificial benchmark model of oblique laser incidence by finite vo
Analysis on capabilities of density-based solvers within Open FOAM to distinguish aerothermal variab
A Second Order Radiative Transfer Equation and Its Solution by Meshless Method with Application to S
Analysis on transient conjugate heat transfer in gap–cavity–gap structure heated by high speed airfl
Numerical simulation of infrared signature emitted by liquid rocket plume using wide band k-distribu
Effect of air temperature on combustion characteristics and NOx emissions from a 0.5 MW pulverized c
Experimental study of the impact of holes-typesuction on the flow characteristics in a high-load com
First-principles molecular dynamics study on temperature-dependent dielectric function of bulk 3C an
Temperature-dependent dielectric function of germanium in the UV-vis spectral range: A first-princip
Characterization of combustion and NOx emissions with respect to over-fire air damper opening in a d
Simulation of flow behavior of particles bycluster structure-dependent drag coefficient model for ch
An effective inversion algorithm for retrieving bimodal aerosol particle size distribution from spec
Study of topology and vortex structure in turbinecascades with tip clearance under differentincidenc
Effect of the anthracite ratio of blended coals on the combustion and NOx emission characteristics o
Experimental study on the characteristics of heat transfer and flow resistance in a turbulent pipe f
Evaluation on cold modeling flow field for a down-fired 600 MWe supercritical boiler with multi-inje
Modeling of a rotational supercavitating evaporator and geometrical characteristics of supercavity i
Annaland Martin van Sint．Hans Kuipers, Dongsheng Wen, Discrete particle modeling of granular tempera
A de？ciency problem of the least squares ？nite element method for solving radiative transfer in stro
Simulation of flow behavior of particles by cluster structure-dependent drag coefficient model for c
Aerodynamic characteristics within a cold small-scale model for a down-fired 350 MWe supercritical u
Numerical simulation of natural convection in a square enclosure filled with nanofluid using the two
Inner and Outer Secondary-Air Distance-Effect Study within a Cold Small-Scale Model of a New Down-Fi
New over-fire air arrangement and its air ratio optimization determined by aerodynamic characteristi
期刊信息
位置：