中文摘要：

泡沫金属应用到换热器空气侧有望提高析湿工况下的换热性能。为了了解湿空气在泡沫金属内的热质传递和压降特性,建立了泡沫金属内液滴形成、生长和运动特性的数值模型。基于液滴成核数目和成核临界半径得出液滴形成过程的传质率模型;通过建立液滴与湿空气相界面附近湿空气中水蒸气的组分守恒方程,得出液滴生长过程的传质率模型;通过对不同孔棱柱表面液滴的受力分析,建立在重力和风力的共同作用下的液滴接触角模型。将液滴形成及生长的传质率模型和接触角模型分别作为质量源项和表面张力源项,加入连续性方程、动量方程和能量方程组中,实现对泡沫金属内液滴生长、形成和运动过程模拟。模型的实验验证结果表明,换热量预测值与实验结果的最大偏差为11.9%,压降预测值与实验结果的最大偏差为17.7%。

英文摘要：

The application of metal foam in the airside of heat exchanger has the potential to improve the heat transfer performance under wet conditions. In order to know the heat, mass transfer and pressure drop characteristics of wet air in metal foam, numerical models for water droplet formation, growth and movement are developed. The mass transfer rate model for droplet formation is based on the heterogeneous nucleation rate and critical nucleation radius of droplet; the mass transfer rate model for droplet growth is based on the species conservation of water vapor on phase interface between the droplet and moist air; the contact angle model of the droplet under combined effects of gravity and air forces is based on the force analysis of droplets on the ligament. The models of mass transfer rate during water droplet formation and growth processes and the model of contact angle are reflected in the continuity, momentum and energy conservation equations as the mass source term and momentum term, which realizes the simulation for the water droplet formation, growth and movement processes in metal foam. The experimental validation of the proposed model shows that, the maximum deviations of the heat transfer rate and pressure drop between the simulation results and experimental data are 11.9% and 17.7%, respectively.