位置:成果数据库 > 期刊 > 期刊详情页
间苯二酚杯[4]芳烃硫醚衍生物SAW分子印迹膜的合成
  • 期刊名称:化学传感器
  • 时间:0
  • 页码:48-53
  • 分类:TN65[电子电信—电路与系统] TH811[机械工程—仪器科学与技术;机械工程—精密仪器及机械]
  • 作者机构:[1]Institute of Acoustics, Chinese Academy of Sciences BeiJing 100190, [2]Department of Electronics, Beijing Normal University,Information Science and Technology Beijing 100875
  • 相关基金:supported by the National Nature Science Foundation of China(11074268,10834010)
  • 相关项目:采用粘弹性敏感膜的声表面波气体传感器敏感机理与性能优化研究
中文摘要:

based on optimal design on the core element of the sensor,a wireless and passive surface acoustic wave(SAW)temperature sensor integrated with ID Tag was presented.A reflective delay line,which consists of a transducer and eight reflectors on YZ LiNbO3 substrate.Was fabricated as the sensor element,in which,three reflectors were used for temperature sensing,and the other five were for the ID Tag using phase encoding.Single phase unidirectional transducers(SPUDTs)and shorted grating were used to structure the sAW device,leading to excellent signal to noise ratio(SNR).The performance of the SAW device was simulated by the coupling of modes(COM)prior to fabrication.Using the network analyzer,the response in time domain of the fabricated 434 MHz SAW sensor was characterized,the measured S11 agrees well with the simulated one,sharp reflection peaks,high signal/noise,and low spurious noise between the reflection peaks were observed.Using the radar system based on FSCW as the reader unit.the developed SAW temperature sensors were evaluated wirelessly.Excellent1 inearity and good resolution of士1℃ were observed.

英文摘要:

based on optimal design on the core element of the sensor,a wireless and passive surface acoustic wave(SAW)temperature sensor integrated with ID Tag was presented.A reflective delay line,which consists of a transducer and eight reflectors on YZ LiNbO3 substrate.Was fabricated as the sensor element,in which,three reflectors were used for temperature sensing,and the other five were for the ID Tag using phase encoding.Single phase unidirectional transducers(SPUDTs)and shorted grating were used to structure the sAW device,leading to excellent signal to noise ratio(SNR).The performance of the SAW device was simulated by the coupling of modes(COM)prior to fabrication.Using the network analyzer,the response in time domain of the fabricated 434 MHz SAW sensor was characterized,the measured S11 agrees well with the simulated one,sharp reflection peaks,high signal/noise,and low spurious noise between the reflection peaks were observed.Using the radar system based on FSCW as the reader unit.the developed SAW temperature sensors were evaluated wirelessly.Excellent1 inearity and good resolution of士1℃ were observed.

同期刊论文项目
同项目期刊论文