欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
对铜微热管内壁轴向微沟槽高速充液旋压成形工艺进行实验研究,研究关键工艺参数包括拉管速度、旋压钢球数量、多齿芯头位置,分析其对微沟槽成形的影响,优化加工工艺参数。通过观察微沟槽横截面显微照片,分析微沟槽旋压成形过程中的塑性变形,初步探讨轴向微沟槽高速充液旋压成形机理。实验结果表明,拉管速度应在48 cm/min～64 cm/min之间,最佳旋压球数量为4,多齿芯头和旋压球之间的距离不得大于3.7 mm;金属塑性变形较小、未被充分挤压入多齿芯头沟槽,是影响微沟槽成形的主要原因。
英文摘要：
The forming process of axial micro-grooves of micro-heatpipe via high-speed oil-filled spinning was analyzed.The effects of crucial process parameters including drawing speed,spinning ball numbers and multi-tooth tool position on the forming of micro grooves were studied.The forming mechanism of axial micro-grooves of micro-heatpipe forming via high-speed oil-filled spinning were discussed through analyzing the sectional metallograph of grooves and plastic deformation of copper tube during spinning.The experimental results show that the small groove-depth is due to the insufficient deformation and plastic flow of copper.The optimal drawing speed is between 48 and 64 cm/min,spinning ball number is 4 and distance between multi-tooth tool and spinning ball should be no more than 3.7 mm.The inadequacy plastic deformation and pressing into the grooves are the main factors affecting the forming of micro-grooves.
同期刊论文项目
同项目期刊论文
Fabrication of graphite composite bipolar plate forminiature PEMFCs by micro planing with multi-cutt
Microstructure evolution of adiabatic shear bands and mechanisms of saw-tooth chip formation in mach
Operational characteristics of a passive air-breathing direct methanol fuel cell under various struc
Effect of fabrication parameters on capillary performance of composite wicks for two-phase heat tran
Structural diversity and orientation dependence of a liquid-fed passive air-breathing direct methano
Numerical simulation of transport characteristics of porous metal fiber sintered felts used in micro
Fabrication of wave-like microstructure on the bottom of microflow channel of metallic bipolar plate
Three-dimensional finite-difference lattice Boltzmann model and its application to inviscid compress
Problems involved in the shell-side performance of a longitudinal-flow shell-and-tube heat exchanger
Surfactant-free ionic liquid-based nanofluids with remarkable thermal conductivity enhancement at ve
Numerical study of heat-transfer enhancement by punched winglet-type vortex generator arrays in fin-
Experimental study on the performance of a novel structure for two-phase flow distribution in parall
Exergetic analysis of transcritical CO2 residential air-conditioning system based on experimental da
Numerical study of heat transfer enhancement by unilateral longitudinal vortex generators inside par
Roughness effect on flow and thermal boundaries in microchannel/nanochannel flow using molecular dyn
Condensation heat transfer characteristics of zeotropic refrigerant mixture R407C on single, three-r
Preparation and thermal energy storage properties of paraffin/expanded graphite composite phase chan
A numerical study of the deposition characteristics of sulfuric acid vapor on heat exchanger surface
Thermal energy storage cement mortar containing n-octadecane/expanded graphite composite phase chang
Modeling the effect of anisotropy of gas diffusion layer on transport phenomena in a direct methanol
Numerical analysis on performance and contaminated failures of the miniature split Stirling cryocool
Experimental Investigation on the Performances on the Shell Side of Shell-and-Tube Heat Exchangers w
期刊信息
位置：