欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
为研究水力脉冲射流流场内旋流流场的变化特性,通过建立井底边界条件下单喷嘴脉冲射流冲击流场物理模型,对脉冲射流旋流流场进行了数值模拟研究.结果表明,非稳态旋流是脉冲射流流场的一个显著特征,对脉冲射流钻井提速起到重要作用,旋流速度和范围具有周期性变化且不随脉冲频率发生改变;在单周期内,旋流强度与脉冲射流速度变化具有一致性,旋流影响范围由前期的快速扩大到后期的缓慢扩大,一直保持增大趋势;旋流作用强于射流动能是脉冲射流产生局部脉动负压的主要原因,有利于降低压持效应;旋流流场改变钻头表面的压力分布,有利于提高钻头清洗效果.研究结果对指导脉冲射流提速技术具有一定的参考价值.
英文摘要：
In order to investigate the varying characteristics of swirl flow field within hydro-pulsed jet flow field, the numericalsimulation research was conducted on the pulsed jet swirl flow field by building a physical model of single-nozzle pulsed jet impactflow field under bottom hole boundary condition. The result shows that the unstable swirl flow is a significant feature of pulsed jet flowfield and plays an important part in accelerating pulsed jet drilling. The swirl flow rate and range change periodically and do not changewith the pulse frequency. Within single cycle, the swirl flow is consistent with the change of pulsed jet rate, and range of influence ofswirl flow changes from rapid expansion to later slow expansion, maintaining an expansion trend all the time. The swirl flow effect issuperior to the jet energy, which is the main reason for local pulse negative pressure generated by pulsed jet. This helps reduce the chiphold-down effect. The swirl flow field changes the pressure distribution on bit surface and helps clean the bit. The research findings areof some reference value to guidance of pulsed jet accelerating technique.
同期刊论文项目
同项目期刊论文
Study on a Ranging System Based on Dual Solenoid Assemblies, for Determining the Relative Position o
Mechanical Analyses of Casings in Boreholes, under Non-uniform Remote Crustal Stress Fields: Analyti
Effects of organo-modified montmorillonite on the tribology performance of bismaleimide-based nanoco
Coupled dynamic analysis of deepwater drilling riser under combined forcing and parametric excitatio
Experimental investigation on the non-planar propagation of hydraulic fracture in Fractured Shale Re
Finite element analysis of deepwater conductor bearing capacity to analyze the subsea wellhead stabi
On the collapse resistance of multilayer cemented casing in directional well under anisotropic forma
Simulation and analysis of coal seam conditions on the stress disturbance effects of pulsating hydro
On the Use of PEBI Grids in the Numerical Simulations of Two-Phase Flows in Fractured Horizontal Wel
Finite element method for simulating the effects of torque and drag on buckling of tubular inside bo
A new method for determining the minimum gas injection rate required for hole cleaning in horizontal
Static analysis of deep-water marine riser subjected to both axial and lateral forces in its install
Structure,and Properties of Poly (vinylacetate-co-methyl methacrylate) Nanocomposite Microspheres Wi
The Research on Borehole Stability in Depleted Reservoir and Caprock: Using the Geophysics Logging D
In-situ encapsulating MMT intermediate particles by suspension polymerization of poly (methyl methac
Mechanical behavior analysis for the determination of riser installation window in offshore drilling
Reactivation mechanism of natural fractures by hydraulic fracturing in naturally fractured shale res
A magnet ranging calculation method for steerable drilling in build-up sections of twin parallel hor
A new electromagnetic beacon tool for directional drilling in steam assisted gravity drainage horizo
Real-Time Prediction and Optimization of Drilling Performance Based on a New Mechanical Specific Ene
The sensibility of mechanical behavior to loading rate for shale gas reservoir with different weak p
On Appropriately Matching the Bottomhole Pendulum Assembly with the Anisotropic Drill Bit, to Contro
期刊信息
位置：