位置：成果数据库 > 期刊 > 期刊详情页
挤压铸造法制备双连续氮化钛增强铝基复合材料
  • ISSN号：0454-5648
  • 期刊名称：《硅酸盐学报》
  • 时间：0
  • 分类：TG249.2[金属学及工艺—铸造] TB333[一般工业技术—材料科学与工程]
  • 作者机构：[1]西北工业大学摩擦焊接重点实验室, [2]西安交通大学金属材料强度国家重点实验室
  • 相关基金：国家自然科学基金(51272205,A3前瞻计划-51161140399,51071123,51101126)项目;凝固技术国家重点实验室自主研究课题(43-QP-2009,31-TP-2009)资助;博士后科学基金第54批面上项目(2013M542383)资助;金属材料强度国家重点实验室开放课题(20121208)资助
作者： 鲁元[1], 杨建锋[2], 李京龙[1], 李鹏[1]
关键词： 氮化钛, 铝基复合材料, 挤压铸造法, 强韧化机制
中文摘要：

通过碳热还原法制备了多孔氮化钛预制体,利用挤压铸造法制备双连续氮化钛增强铝基复合材料,并研究了铝合金含量对复合材料显微组织和力学性能的影响,以及复合材料的强韧化机制。结果表明:随着复合材料铝合金含量的增加,复合材料的弯曲强度和显微硬度下降,断裂韧性增加。复合材料的断裂模式为氮化钛等轴晶粒沿晶韧性断裂。氮化钛与铝合金不发生化学反应,避免了过度的界面反应对复合材料力学性能的不利影响。复合材料强韧化机制主要有负荷传递、位错增殖和裂纹偏转。

同期刊论文项目
多功能陶瓷的新功能创制与应用潜力探索
期刊论文 73 获奖 4 专利 19
碳化硅纳米点阵诱导高纯度多晶致密碳化硅陶瓷的制备与性能优化
期刊论文 4
摩擦焊大变形体系热、力耦合机制及组织非平衡演变的热力学研究
期刊论文 23 专利 1
摩擦大变形热力耦合作用下激光熔覆组织的演变特征与机理
期刊论文 20 著作 1
同项目期刊论文
Nanostructured Co–Cr–Fe alloy surface layer fabricated by combination of laser clad and friction sti
选择性激光熔化成形关键基础问题的研究进展
The friction heat production and atom diffusion behaviors during Mg-Ti rotating friction welding pro
Development and characterization of laser surface cladding (Ti, W)C reinforced Ni-30Cu alloy composi
A model to describe the surface gradient-nanograin formation and property of friction stir processed
Effects of thermal history and isostatic pressing on the microstructure evolution of metallic compon
Viscoplastic friction and microstructural evolution behavior of laser-clad Co-Cr-Ni-Mo coating
扩散焊吸液芯结构对热管传热性能的影响
异种钛合金连续驱动摩擦焊稳态阶段粘塑性区平均温度的解析计算
恒进给旋转摩擦条件下金属力学参量周期响应行为
挤压铸造法制备双连续β-Si3N4增强铝基复合材料
激光熔覆结合搅拌摩擦加工在奥氏体不锈钢表面制备超细晶互锁结构Ni-Al-WC涂层（英文）
Si_3N_4的氧化预处理对浆料流变性及多孔陶瓷性能的影响
挤压铸造法制备双连续β-Si3N4增强铝基复合材料
PECVD沉积和原位退火时间对h-BN薄膜组成及光学带隙的影响
Joining aluminum to titanium alloy by friction stir lap welding with cutting pin
单晶硅低温连接的表面预共晶法研究
Periodic variation of torque and its relations to interfacial sticking and slipping during friction
High strength lap joint of aluminium and stainless steels fabricated by friction stir welding with c
Diffusion bonding titanium to stainless steel using Nb/Cu/Ni multi-interlayer
In situ synthesizing Al3Ni for fabrication of intermetallic-reinforced aluminum alloy composites by
Friction heat production and atom diffusion behaviors during Mg-Ti rotating friction welding process
An analytical model to optimize rotation speed and travel speed of friction stir welding for defect-
铝合金FSW过程中搅拌针前缘金属周期性流动行为研究
搅拌摩擦焊准稳态温度场数值模拟
Friction stir processing for the modification of laser claded microstructure
An analytical model of steady-state continuous drive friction welding
Microstructures and mechanical properties of magnesium alloy and stainless steel weld-joint made by
Effect of friction time on mechanical and metallurgical properties of continuous drive friction weld
扩散焊吸液芯结构对热管传热性能的影响
异种钛合金连续驱动摩擦焊稳态阶段粘塑性区平均温度的解析计算
恒进给旋转摩擦条件下金属力学参量周期响应行为
挤压铸造法制备双连续β-Si3N4增强铝基复合材料
搅拌摩擦焊温度场研究进展
搅拌摩擦焊准稳态热力耦合过程数值模拟研究
连续驱动摩擦焊接头的特征形貌和性能
Synthesis of nano-sized amorphous boron powders through active dilution self-propagating high-temper
Effect of LiAlSiO4 particle size on the properties of LAS/SiC porous ceramics with near zero thermal
Characterization of the near-eutectic al2O 3-40wt% zrO2 composite coating fabricated by atmospheric
Transparent yttria stabilized zirconia from glycine-nitrate process by spark plasma sintering
Research on the electro-chemical performance of nanocomposites of vanadium oxide and carbon nanotube
Mechanical behavior of cellular borosilicate glass with pressurized Ar-filled closed pores
Characterization of La0.6Sr0.4Co0.2Fe0.8O3-δ+La2NiO4+δ composite cathode materials for s
Fabrication of SiC Ceramics with Micropatterns from a Facile Replication Process
Effects of annealing treatment on phase composition and microstructure of CoCrFeNiTiAlx high-entropy
Fabrication of highly dense pure SiC ceramics via the HTPVT method
Microstructure and electrochemical properties of porous La2NiO4+δ electrode screen-printed on Ce0.8S
Electrochemical evaluation of La2NiO4+δ-based composite electrodes screen-printed on Ce0.8Sm0.2O1.9
Dielectric inspection of BaZr0.2Ti0.8O3 ceramics under bias electric field: A survey of polar nano-r
Low temperature synthesis of polycrystalline explosion phase boron nitride submicron-powders
Microstructure and electrochemical properties of porous La2NiO4+δ electrodes spin-coated on Ce0.8Sm0
Enhanced photothermocatalytic synergetic activity towards gaseous benzene for Mo+C co-doped titanate
Wet-Chemical Synthesis and Enhanced Photocatalytic Performance of ZnO/Ag Micro Hybrid Material
Solution-Based Doping of Cobalt into ZnO Nanorods membrane
纳米Al2O3-ZrO2涂层的制备与微观结构
Effect of glassy bonding materials on the properties of LAS/SiC porous ceramics with near zero therm
Synthesis and characterization of sol–gel derived continuous spinning alumina based fibers with sili
Hot pressed translucent (Mg,Y)-α/β-Sialon ceramics
Efficiency enhancement of CuInS2 quantum dot sensitized TiO2 photo-anodes for solar cell application
Study on the preparation and electrical properties of NTC thick film thermistor deposited by superso
Photoelectrochemical behavior of TiO2 nanorod arrays decorated with CuInS2 quantum dots
Preparation of Refined SiC Patterns from Imprinting of Partially Cross-Linked Solid Polycarbosilane
Growth and Optical Properties of Explosion Phase Boron Nitride Octahedron Crystals
Crystallization and assembling behavior of calcium carbonate controlled by Ca-organic fibers
Composite coatings with in situ formation for Fe–Ni–Cr alloy as bipolar plate of PEMFC
Ag(I)-bovine serum albumin hydrosol-Mediated formation of Ag3PO4/reduced graphene oxide composites f
Low field magnetoresistance of La0.7Ca0.3MnO3 ceramics fabricated by fast sintering process
Mechanical alloying synthesis and spark plasma sintering consolidation of CoCrFeNiAl high-entropy al
Synthesis and photovoltaic performance of reduced graphene oxide–TiO2 nanoparticles composites by so
Synthesis of Various Sized CuInS2 Quantum Dots and Their Photovoltaic Properties as Sensitizers for
The effect of different rare earth oxides on mechanical and optical properties of hot pressed α/β-Si
Synthesis of nanosized zirconium carbide powders by a combinational method of sol–gel and pulse curr
First-principles study on site preference of aluminum vacancy and nitrogen atoms in γ-alon
Effect of raw materials on microstructure and bending strength of porous in situ MgO/Fe-Cr-Ni compos
Preparation of B4C–SiC composite ceramics through hot pressing assisted by mechanical alloying
An efficient way to improve the electrical stability of Ni0.6Si0.2Al0.6Mn1.6O4 NTC thermistor
Effects of TiB2 on microstructure of nano-grained Cu–Cr–TiB2 composite powders prepared by mechanica
Molecular dynamics study of the mechanical properties of single-crystal bulk β-Zn4Sb3: Vacancy
Ultra-fast densification of CNTs reinforced alumina based on combustion reaction and quick pressing
Effect of 6H-SiC crystal growth shapes on thermo-elastic stress in the growing crystal
Molybdenum compounds supported on ordered mesoporous carbon and their influence on the supercapaciti
Preparation of Mesoporous V2O5@TiO2 Composites with Enhanced Photoactivity for Gaseous Benzene Degra
粉末粒径对热压烧结碳化硼致密化及力学性能的影响
碳热还原-反应烧结法制备多孔氮化硅陶瓷
CaTiO3基微波介质陶瓷的频率温度稳定性
Simple and eco-friendly preparation of silver films coated on copper surface by replacement reaction
Highly Transparent Mg0.27Al2.58O3.73N0.27 Ceramic Prepared by Pressureless Sintering
Efficiency enhancement of TiO2 nanodendrite array electrodes in CuInS2 quantum dot sensitized solar
Self-assembly of Au nanocrystals/titanate nanobelts heterojunctions and enhancement of the photocata
Morphology controlled synthesis and characterization of Bi2WO6 photocatalysts
Evolution of dielectric properties in BaZrxTi1-xO3 ceramics: Effect of polar nano-regions
Carbon nanotube-induced formation of vanadium oxide nanorods and nanotubes
Fabrication of highly dense Al2O3 ceramics
近零膨胀多孔SiC/LAS陶瓷材料的制备与性能
Molecular Dynamics Simulation of the Mechanical Properties of Single-Crystal Bulk Mg2Si
Fabrication and mechanism of 6H-type silicon carbide whiskers by physical vapor transport technique
Optical and mechanical properties of Mg-doped sialon composite with La2O3 as additive
挤压铸造法制备双连续β-Si3N4增强铝基复合材料
莫来石单相胶前驱体结晶动力学
利用燃烧反应快速升温方法制备Al_2O_3/YAG共晶陶瓷
期刊信息
  • 《硅酸盐学报》
  • 中国科技核心期刊
  • 主管单位:中国科学技术协会
  • 主办单位:中国硅酸盐学会
  • 主编：南策文
  • 地址：北京海淀区三里河路11号
  • 邮编：100831
  • 邮箱：jccsoc@sina.com
  • 电话：010-57811253 57811254
  • 国际标准刊号：ISSN：0454-5648
  • 国内统一刊号：ISSN：11-2310/TQ
  • 邮发代号:2-695
  • 获奖情况:
  • EI　Compendex、CA、SA、PI收录期刊,全国核心期刊,中国期刊方阵“双效”期刊
  • 国内外数据库收录:
  • 美国化学文摘（网络版）,荷兰文摘与引文数据库,美国工程索引,美国剑桥科学文摘,日本日本科学技术振兴机构数据库,中国中国科技核心期刊,中国北大核心期刊（2004版）,中国北大核心期刊（2008版）,中国北大核心期刊（2011版）,中国北大核心期刊（2014版）,英国英国皇家化学学会文摘,中国北大核心期刊（2000版）
  • 被引量:27713