东篱科研大数据发现系统（DRDS）

位置：成果数据库 > 期刊 > 期刊详情页

Effect of raw materials on microstructure and bending strength of porous in situ MgO/Fe-Cr-Ni compos

ISSN号：0921-5093
期刊名称：Materials Science and Engineering A-Structural Mat
时间：2011.11.11
页码：8438-8442
相关项目：多功能陶瓷的新功能创制与应用潜力探索

同期刊论文项目

多功能陶瓷的新功能创制与应用潜力探索

期刊论文 73 获奖 4 专利 19

同项目期刊论文

Synthesis of nano-sized amorphous boron powders through active dilution self-propagating high-temper

Effect of LiAlSiO4 particle size on the properties of LAS/SiC porous ceramics with near zero thermal

Characterization of the near-eutectic al2O 3-40wt% zrO2 composite coating fabricated by atmospheric

Transparent yttria stabilized zirconia from glycine-nitrate process by spark plasma sintering

Research on the electro-chemical performance of nanocomposites of vanadium oxide and carbon nanotube

Mechanical behavior of cellular borosilicate glass with pressurized Ar-filled closed pores

Characterization of La0.6Sr0.4Co0.2Fe0.8O3-δ+La2NiO4+δ composite cathode materials for s

Fabrication of SiC Ceramics with Micropatterns from a Facile Replication Process

Effects of annealing treatment on phase composition and microstructure of CoCrFeNiTiAlx high-entropy

Fabrication of highly dense pure SiC ceramics via the HTPVT method

Microstructure and electrochemical properties of porous La2NiO4+δ electrode screen-printed on Ce0.8S

Electrochemical evaluation of La2NiO4+δ-based composite electrodes screen-printed on Ce0.8Sm0.2O1.9

Dielectric inspection of BaZr0.2Ti0.8O3 ceramics under bias electric field: A survey of polar nano-r

Low temperature synthesis of polycrystalline explosion phase boron nitride submicron-powders

Microstructure and electrochemical properties of porous La2NiO4+δ electrodes spin-coated on Ce0.8Sm0

Enhanced photothermocatalytic synergetic activity towards gaseous benzene for Mo+C co-doped titanate

Wet-Chemical Synthesis and Enhanced Photocatalytic Performance of ZnO/Ag Micro Hybrid Material

Solution-Based Doping of Cobalt into ZnO Nanorods membrane

纳米Al2O3-ZrO2涂层的制备与微观结构

Effect of glassy bonding materials on the properties of LAS/SiC porous ceramics with near zero therm

Synthesis and characterization of sol–gel derived continuous spinning alumina based fibers with sili

Hot pressed translucent (Mg,Y)-α/β-Sialon ceramics

Efficiency enhancement of CuInS2 quantum dot sensitized TiO2 photo-anodes for solar cell application

Study on the preparation and electrical properties of NTC thick film thermistor deposited by superso

Photoelectrochemical behavior of TiO2 nanorod arrays decorated with CuInS2 quantum dots

Preparation of Refined SiC Patterns from Imprinting of Partially Cross-Linked Solid Polycarbosilane

Growth and Optical Properties of Explosion Phase Boron Nitride Octahedron Crystals

Crystallization and assembling behavior of calcium carbonate controlled by Ca-organic fibers

Composite coatings with in situ formation for Fe–Ni–Cr alloy as bipolar plate of PEMFC

Ag(I)-bovine serum albumin hydrosol-Mediated formation of Ag3PO4/reduced graphene oxide composites f

Low field magnetoresistance of La0.7Ca0.3MnO3 ceramics fabricated by fast sintering process

Mechanical alloying synthesis and spark plasma sintering consolidation of CoCrFeNiAl high-entropy al

Synthesis and photovoltaic performance of reduced graphene oxide–TiO2 nanoparticles composites by so

Synthesis of Various Sized CuInS2 Quantum Dots and Their Photovoltaic Properties as Sensitizers for

The effect of different rare earth oxides on mechanical and optical properties of hot pressed α/β-Si

Synthesis of nanosized zirconium carbide powders by a combinational method of sol–gel and pulse curr

First-principles study on site preference of aluminum vacancy and nitrogen atoms in γ-alon

Preparation of B4C–SiC composite ceramics through hot pressing assisted by mechanical alloying

An efficient way to improve the electrical stability of Ni0.6Si0.2Al0.6Mn1.6O4 NTC thermistor

Effects of TiB2 on microstructure of nano-grained Cu–Cr–TiB2 composite powders prepared by mechanica

Molecular dynamics study of the mechanical properties of single-crystal bulk β-Zn4Sb3: Vacancy

Ultra-fast densification of CNTs reinforced alumina based on combustion reaction and quick pressing

Effect of 6H-SiC crystal growth shapes on thermo-elastic stress in the growing crystal

Molybdenum compounds supported on ordered mesoporous carbon and their influence on the supercapaciti

Preparation of Mesoporous V2O5@TiO2 Composites with Enhanced Photoactivity for Gaseous Benzene Degra

粉末粒径对热压烧结碳化硼致密化及力学性能的影响

碳热还原-反应烧结法制备多孔氮化硅陶瓷

CaTiO3基微波介质陶瓷的频率温度稳定性

Simple and eco-friendly preparation of silver films coated on copper surface by replacement reaction

Highly Transparent Mg0.27Al2.58O3.73N0.27 Ceramic Prepared by Pressureless Sintering

Efficiency enhancement of TiO2 nanodendrite array electrodes in CuInS2 quantum dot sensitized solar

Self-assembly of Au nanocrystals/titanate nanobelts heterojunctions and enhancement of the photocata

Morphology controlled synthesis and characterization of Bi2WO6 photocatalysts

Evolution of dielectric properties in BaZrxTi1-xO3 ceramics: Effect of polar nano-regions

Carbon nanotube-induced formation of vanadium oxide nanorods and nanotubes

Fabrication of highly dense Al2O3 ceramics

近零膨胀多孔SiC/LAS陶瓷材料的制备与性能

Molecular Dynamics Simulation of the Mechanical Properties of Single-Crystal Bulk Mg2Si

Fabrication and mechanism of 6H-type silicon carbide whiskers by physical vapor transport technique

Optical and mechanical properties of Mg-doped sialon composite with La2O3 as additive

挤压铸造法制备双连续氮化钛增强铝基复合材料

挤压铸造法制备双连续β-Si3N4增强铝基复合材料

莫来石单相胶前驱体结晶动力学