中文摘要：

应用保角变换法、镜像法、耦合模理论和电光调制理论设计了一种推挽电极聚合物脊形波导定向耦合电光开关,阐述了基本结构和工作原理,给出了器件的设计和优化过程,主要分析了耦合长度、开关电压、输出光功率、插入损耗、串扰等特性.为了实现正常的开关功能,讨论了制作公差、波谱漂移以及单模光纤耦合损耗对器件性能的影响.模拟结果表明,所设计的开关的耦合长度为3082μm,开关电压为2.14V;插入损耗小于1.14dB,串扰小于-30dB.与BPM仿真结果以及实验结果的对比表明,文中提出的波导和电极的理论分析与计算方法具有较高的精度和可行性.

英文摘要：

A polymer directional coupler （DC） electro-optic switch with push-pull electrodes and rib waveguides is designed based on the conformal transforming method, image method, coupled mode theory, and electro-optic modulation theory. Its structure and principle are described, the design and optimization are performed, and the characteristics are analyzed, including the coupling length, switching voltage, output power, insertion loss, and crosstalk. To realize normal switching function,the fabrication tolerance,wavelength shift, and coupling loss between a single mode fiber （SMF） and the waveguide are discussed. Simulation results show that the coupling length is 3082μm; the push-pull switching voltage is 2.14V;and the insertion loss and crosstalk are less than 1.14 and -30dB,respectively. The proposed analytical technique on waveguides and electrodes is proven to be accurate and computationally efficient when compared with the beam propa- gation method （BPM） and the experimental results.