位置:成果数据库 > 期刊 > 期刊详情页
氮爆式液压冲击器的仿真建模
  • 期刊名称:华南理工大学学报(自然科学版), 38(2), pp 90-94, 2010/2/10
  • 时间:0
  • 分类:TH137.51[机械工程—机械制造及自动化]
  • 作者机构:[1]华南理工大学机械与汽车工程学院,广东广州510640
  • 相关基金:国家自然科学基金资助项目(50775075);机械系统与振动国家重点实验室基金资助项目(VSN-2008-01)
  • 相关项目:交流液压系统基础理论和关键技术研究
中文摘要:

为研究液压冲击器的冲击能量控制特性,根据功率键合原理,搭建了氮爆式液压冲击器工作时冲程和回程两阶段的功率键图,据此建立了氮爆式液压冲击器的状态方程组.通过AMESIM平台构建了氮爆式液压冲击器仿真系统.该系统能综合考虑冲击器运动状态高频变化特点,可快速实现对氮爆式液压冲击器主要参数的计算.利用DBS500型氮爆式液压冲击器现有的设计参数进行仿真计算,计算结果与实测参数之误差在6%以内,表明所建模型是基本合理的.

英文摘要:

In order to analyze the impact energy-controlling performance of nitrogen-inflating hydraulic hammer, the power bond graphs of both the stroke and the backhaul are presented based on the theory of power bond, and the state equations of the nitrogen-inflating hydraulic hammer are established. Afterwards, a simulation model, which takes into consideration the high-frequency variation of motion state of hydraulic hammer and realizes the fast calculation of main simulation parameters, is built in the AMESIM system. Then, a simulation is performed using the existing design parameters of DBS500 hydraulic hammer, and the error between the simulated and the test results is found to be less then 6%. It is thus concluded that the proposed model is basically correct and reliable.

同期刊论文项目
同项目期刊论文