欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
降低井底压差，减小岩屑的压持效应，可以显著提高钻井的机械钻速。根据射流式水力降压技术的原理，结合环空射流泵、射流降压短节和射流泵钻头等射流降压工具的发展现状，提出一种新型的环形射流泵结构，采用混合网格数值计算的方法对影响其降压性能的关键因素进行分析。结果表明：井底流体的回流是导致射流泵钻头降压效果变差的主要原因，回流量与井壁间隙成正比，与反向喷嘴的轴向倾角成反比；密封钻头与井壁问的间隙是提高射流泵钻头性能的关键；新型涡流一射流混合降压钻头可降压0．45～0．88MPa，是现有射流式射流泵钻头降压效果的3～4倍。
英文摘要：
Reducing the bottom-hole differential pressure （BHDP） and the cuttings hold-down effect can significantly improve the rate of penetration （ROP）. Based on the jet hydraulic pressure drawdown theory, the current research and development situation of the jet hydraulic pressure drawdown tools including annular jet pump, jet pump joint and jet pump bit, a peripheral nozzle jet pump bit was designed. Using hybrid grid method, the key factors affecting the depressurization capacity of the bit were analyzed. The results show that the main reason of reducing the depressurization capacity of the jet pump bit is the backflow of the bottom-hole fluid. The backflow rate is in direct proportion to the bit clearance and in inverse proportion to the angle between the reverse nozzle axis and the bit axis. To seal the bit clearance is the key point to improving the performance of the jet pump bit. The new vortex and jet pump combination bit can reduce the BHDP about 0. 45-0. 88 MPa, which is 3-4 times the depressurization effect of existing jet pump bit.
同期刊论文项目
同项目期刊论文
Study on a Ranging System Based on Dual Solenoid Assemblies, for Determining the Relative Position o
Mechanical Analyses of Casings in Boreholes, under Non-uniform Remote Crustal Stress Fields: Analyti
Effects of organo-modified montmorillonite on the tribology performance of bismaleimide-based nanoco
Coupled dynamic analysis of deepwater drilling riser under combined forcing and parametric excitatio
Experimental investigation on the non-planar propagation of hydraulic fracture in Fractured Shale Re
Finite element analysis of deepwater conductor bearing capacity to analyze the subsea wellhead stabi
On the collapse resistance of multilayer cemented casing in directional well under anisotropic forma
Simulation and analysis of coal seam conditions on the stress disturbance effects of pulsating hydro
On the Use of PEBI Grids in the Numerical Simulations of Two-Phase Flows in Fractured Horizontal Wel
Finite element method for simulating the effects of torque and drag on buckling of tubular inside bo
A new method for determining the minimum gas injection rate required for hole cleaning in horizontal
Static analysis of deep-water marine riser subjected to both axial and lateral forces in its install
Structure,and Properties of Poly (vinylacetate-co-methyl methacrylate) Nanocomposite Microspheres Wi
The Research on Borehole Stability in Depleted Reservoir and Caprock: Using the Geophysics Logging D
In-situ encapsulating MMT intermediate particles by suspension polymerization of poly (methyl methac
Mechanical behavior analysis for the determination of riser installation window in offshore drilling
Reactivation mechanism of natural fractures by hydraulic fracturing in naturally fractured shale res
A magnet ranging calculation method for steerable drilling in build-up sections of twin parallel hor
A new electromagnetic beacon tool for directional drilling in steam assisted gravity drainage horizo
Real-Time Prediction and Optimization of Drilling Performance Based on a New Mechanical Specific Ene
The sensibility of mechanical behavior to loading rate for shale gas reservoir with different weak p
On Appropriately Matching the Bottomhole Pendulum Assembly with the Anisotropic Drill Bit, to Contro
期刊信息
位置：