欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
针对油气井套管挤毁的研究多局限于强度分析，忽视了套管侧向稳定性问题。除小直径或特厚壁的套管外，常用套管的失效形式应属于失稳损坏。基于外压作用下套管侧向屈曲机制，分别采用 API 标准和圆筒屈曲分析的方法，计算套管侧向屈曲的临界压力。另外，对减小套管计算长度的井下加强工具进行探讨和设计。结果表明：套管纵向长度对侧向屈曲的临界压力具有重要影响；若把套管的计算长度减小到某一范围，可有效地提高套管的抗失稳能力。结果为提高套管抗失稳能力提供了一种新途径，可作为完井后高挤毁风险套管的加强补救措施。
英文摘要：
The current researches on casing collapse are mainly confined to strength analysis, while the problems caused by lateral buckling are less considered. In fact, the most failures of oil and gas well casing, except casings with small diameter or thick wall, can be attributed to the mode of buckling failure. The mechanisms of casing buckling under external pressure were revealed. The critical pressure of casing lateral buckling was calculated using two methods, including an API standard and a cylinder buckling analysis technique. Subsequently, the downhole casing reinforcing tool was designed. The results in-dicate that the casing length used in the calculation has a great influence on the critical pressure for lateral buckling of cas-ings, and the anti-instability of casings increases with the decrease of the values of casing length adopted in the calculation. The findings can efficiently increase the anti-instability of casings and provide a new remedial measure for casings with high collapse risks after well completion.
同期刊论文项目
同项目期刊论文
Study on a Ranging System Based on Dual Solenoid Assemblies, for Determining the Relative Position o
Mechanical Analyses of Casings in Boreholes, under Non-uniform Remote Crustal Stress Fields: Analyti
Effects of organo-modified montmorillonite on the tribology performance of bismaleimide-based nanoco
Coupled dynamic analysis of deepwater drilling riser under combined forcing and parametric excitatio
Experimental investigation on the non-planar propagation of hydraulic fracture in Fractured Shale Re
Finite element analysis of deepwater conductor bearing capacity to analyze the subsea wellhead stabi
On the collapse resistance of multilayer cemented casing in directional well under anisotropic forma
Simulation and analysis of coal seam conditions on the stress disturbance effects of pulsating hydro
On the Use of PEBI Grids in the Numerical Simulations of Two-Phase Flows in Fractured Horizontal Wel
Finite element method for simulating the effects of torque and drag on buckling of tubular inside bo
A new method for determining the minimum gas injection rate required for hole cleaning in horizontal
Static analysis of deep-water marine riser subjected to both axial and lateral forces in its install
Structure,and Properties of Poly (vinylacetate-co-methyl methacrylate) Nanocomposite Microspheres Wi
The Research on Borehole Stability in Depleted Reservoir and Caprock: Using the Geophysics Logging D
In-situ encapsulating MMT intermediate particles by suspension polymerization of poly (methyl methac
Mechanical behavior analysis for the determination of riser installation window in offshore drilling
Reactivation mechanism of natural fractures by hydraulic fracturing in naturally fractured shale res
A magnet ranging calculation method for steerable drilling in build-up sections of twin parallel hor
A new electromagnetic beacon tool for directional drilling in steam assisted gravity drainage horizo
Real-Time Prediction and Optimization of Drilling Performance Based on a New Mechanical Specific Ene
The sensibility of mechanical behavior to loading rate for shale gas reservoir with different weak p
On Appropriately Matching the Bottomhole Pendulum Assembly with the Anisotropic Drill Bit, to Contro
期刊信息
位置：