位置:成果数据库 > 期刊 > 期刊详情页
气吸圆盘式微型薯排种器充种性能模拟与试验
  • ISSN号:1000-1298
  • 期刊名称:《农业机械学报》
  • 时间:0
  • 分类:S223.25[农业科学—农业机械化工程;农业科学—农业工程]
  • 作者机构:昆明理工大学现代农业工程学院,昆明650500
  • 相关基金:国家自然科学基金项目(51305187); 云南省重点新产品开发计划项目(2014BC007); 云南省科技计划青年项目(2015FD011); 昆明理工大学自然科学基金项目(KKSY201323067、KKSY201323025、14118940); 云南省教育厅项目(2016ZZX048)
中文摘要:

为提高气吸圆盘式微型薯排种器充种性能,以云南丽薯6号微型薯为播种对象,基于离散元法,以种子平均法向应力方差为指标,对振动频率和振动幅度分别进行数值模拟,并对上述因素进行单因素试验,试验结果与仿真效果一致。结果表明:增加振动频率和振动幅度可以增大种子平均法向力方差,增强对种子的扰动性,从而提高充种性能。为寻求最佳工作参数组合,采用三因素五水平二次旋转正交组合试验方法,对排种器进行排种性能试验,并对试验结果进行优化与验证。结果表明:在作业速度为2.4 km/h,吸种负压为6 kPa,种层高度为70 mm,振动频率为6.5~6.9 Hz,振动幅度为20~21 mm时,合格指数大于95,重播指数和漏播指数小于2.5。

英文摘要:

In order to realize the mechanized planting of mini-tuber and solve the problem of large seed filling,a vibrating feeding pneumatic disc seed-metering device for mini-tuber was designed. The seedmetering device was composed of metering plate,air chamber,frame and vibrating seed feeding device.Seeding-filling performance was the key factor that influenced the properties of metering device. In order to improve the seed-filling performance of the pneumatic disc seed-metering device,Lishu No. 6 minituber was adopted as sowing object,the method of UDEC was used as research technique,meanwhile,variance yields of average normal stress was considered as the optimizing targets. Through single factor experiment,the vibration frequency and vibration amplitude were numerically simulated respectively. It can be found that the experimental phenomenon and effect were in consistent with the simulation ones.Results showed that vibration frequency and vibration amplitude increased variance yields of average normal stress of seeds,hence disturbance of seeds was enhanced. Based on the three-factor five-level quadratic orthogonal rotating combination test method,the influence of vibration frequency,vibration amplitude and layer height on sowing performance were explored. The regression equations of the three factors and five levels were fitted through the processing by Design-Expert 8. 0. 6( experimental design expert) software. Based on the results of examination,it can be found that the fitting of the equation was good,and the best parameter combination was the operating speed of 2. 4 km/h,negative pressure of6 kPa,vibration frequency of 6. 5 ~ 6. 9 Hz,vibration amplitude of 20 ~ 21 mm and layer height of70 mm. Under the optimal condition,the qualified index was greater than 95,and the multiple index as well as the missing index was less than 2. 5. It showed that the vibrating feeding pneumatic disc seedmetering device met the standard and requirements by comparing the results with the national standard.The research approac

同期刊论文项目
同项目期刊论文
期刊信息
  • 《农业机械学报》
  • 中国科技核心期刊
  • 主管单位:中国科学技术协会
  • 主办单位:中国农业机械学会 中国农业机械化科学研究院
  • 主编:任露泉
  • 地址:北京德胜门外北沙滩一号6号信箱
  • 邮编:100083
  • 邮箱:njxb@caams.org.cn
  • 电话:010-64882610 64867367
  • 国际标准刊号:ISSN:1000-1298
  • 国内统一刊号:ISSN:11-1964/S
  • 邮发代号:2-363
  • 获奖情况:
  • 荣获中国科协优秀期刊二等奖,1997~2000年连续4年获中国科协择优资金,被列入中国期刊方阵,中国期刊方阵“双效”期刊
  • 国内外数据库收录:
  • 美国化学文摘(网络版),英国农业与生物科学研究中心文摘,荷兰文摘与引文数据库,美国工程索引,美国剑桥科学文摘,日本日本科学技术振兴机构数据库,中国中国科技核心期刊,中国北大核心期刊(2004版),中国北大核心期刊(2008版),中国北大核心期刊(2011版),中国北大核心期刊(2014版),中国北大核心期刊(2000版)
  • 被引量:42884