欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
利用线性滑移模型、有限差分及交错网格技术研究脉动水力压裂过程中应力在含裂缝地层中的传播与分布规律，分析不同缝间距和震源频率下裂缝充填物对脉动水力压裂应力扰动效果的影响机制。结果表明：含矿物质裂缝对脉动水力压裂应力扰动影响微弱，可近似看作均质区域；含液体裂缝可通过反射作用引起强透射区与弱透射区介质速度的差异，引发剪应力形成拉伸破坏，但当距离震源较近时，反射波易抵消压力波，削弱压裂效果；含气体裂缝类似含液体裂缝，但反射作用更强烈，距离震源更远才能提升压裂效果；脉动水力压裂可利用裂缝的非均质性促进压裂效果，缝间距为初始人造裂缝长度的2~3倍时可获得较好的压裂效果。
英文摘要：
A linear slip deformation model, a finite-difference method and staggered-grid were used to investigate the stress propagation and distribution in fractured formation during the pulsating hydro-fracturing （PHF） process, and the influence of crack fillers was analyzed at different crack intervals and source frequencies. The numerical simulation results show that the influence of mineral-filled cracks on PHF stress disturbance is weak, so that its fractured zone can be considered as homoge-neous. When the crack is filled with fluid, it can cause the reflection of pressure waves, which will form a great velocity con-trast between strong and weak reflection zones to generate shear stress, then causing tensile damages. However, if the crack is too close to the pulsating source, the reflected and propagated pressure waves will disturb each other and reduce the fractu-ring effect. The influence of gas-filled cracks is similar to that of the fluid-filled, but its reflection of pressure waves is much stronger, which means a longer crack interval can be applied to promote the stress disturbance effect. The PHF technique can be used in coal seams with fracture anisotropy to increase their permeability. When the interval between initial artificial frac-tures and natural fractures is 2-3 times larger than the length of initial artificial fractures, a better PHF stress disturbance effect can be acquired.
同期刊论文项目
同项目期刊论文
Study on a Ranging System Based on Dual Solenoid Assemblies, for Determining the Relative Position o
Mechanical Analyses of Casings in Boreholes, under Non-uniform Remote Crustal Stress Fields: Analyti
Effects of organo-modified montmorillonite on the tribology performance of bismaleimide-based nanoco
Coupled dynamic analysis of deepwater drilling riser under combined forcing and parametric excitatio
Experimental investigation on the non-planar propagation of hydraulic fracture in Fractured Shale Re
Finite element analysis of deepwater conductor bearing capacity to analyze the subsea wellhead stabi
On the collapse resistance of multilayer cemented casing in directional well under anisotropic forma
Simulation and analysis of coal seam conditions on the stress disturbance effects of pulsating hydro
On the Use of PEBI Grids in the Numerical Simulations of Two-Phase Flows in Fractured Horizontal Wel
Finite element method for simulating the effects of torque and drag on buckling of tubular inside bo
A new method for determining the minimum gas injection rate required for hole cleaning in horizontal
Static analysis of deep-water marine riser subjected to both axial and lateral forces in its install
Structure,and Properties of Poly (vinylacetate-co-methyl methacrylate) Nanocomposite Microspheres Wi
The Research on Borehole Stability in Depleted Reservoir and Caprock: Using the Geophysics Logging D
In-situ encapsulating MMT intermediate particles by suspension polymerization of poly (methyl methac
Mechanical behavior analysis for the determination of riser installation window in offshore drilling
Reactivation mechanism of natural fractures by hydraulic fracturing in naturally fractured shale res
A magnet ranging calculation method for steerable drilling in build-up sections of twin parallel hor
A new electromagnetic beacon tool for directional drilling in steam assisted gravity drainage horizo
Real-Time Prediction and Optimization of Drilling Performance Based on a New Mechanical Specific Ene
The sensibility of mechanical behavior to loading rate for shale gas reservoir with different weak p
On Appropriately Matching the Bottomhole Pendulum Assembly with the Anisotropic Drill Bit, to Contro
期刊信息
位置：