欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
采用主应力法与数值模拟相结合的方法,研究分析空心坯料反挤压成形力变化规律。结果表明,空心坯料反挤压在减少接触面积的同时,减小了接触面上的单位变形力,大幅度降低了挤压成形力。经在重型车辆铝合金轮辋成形中验证和应用表明,该方法可行,为底部带中心孔的大型薄壁筒形零件的成形,提供了新思路。
英文摘要：
Forming force during backward extrusion of hollow billet was analyzed by slab method and numerical simulation.The results show that during backward extrusion of hollow billet,the forming force decrease enormously with the decrease of contact area and deformation pressure on the interface.The method is validated and applied for the aluminum alloy wheel of heavy car.It offers a new approach for forming large can parts with thin wall and center hole.
同期刊论文项目
同项目期刊论文
Effect of Extrusion Ratio on Microstructure and Mechanical Properties of As-cast AZ91D Magnesium All
Effects of Multiple Plastic Deformations on Microstructure and Mechanical Properties of 7A04 Ultra-h
Influence of Plastic Deformation on Mechanical Properties and Microstructure of Annealed ZL102 Alloy
Modelling of Microstructure Evolution In AISI 5140 Steel Triple Valve Forming Under Multi-Way Loadin
Influence of Solution Treatment on Impact Toughness and Microstructure of Cobalt-free Maraging Steel
Microstructure evolution of different loading zones during TA15 alloy multi-cycle isothermal local f
Mechanism of unequal deformation during large-scale complex integral component isothermal local load
位置：