欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
研究了横向定常风荷载作用下轴向运动弦线的非线性自激振动问题。将风荷载模型化为平均风速的非线性函数,建立动力学微分方程。采用Galerkin方法,将运动弦线简化为离散的二维系统并进行线性化,分析弦线平衡构型的稳定性,根据Routh-Hurtwitz判据确定了平衡点的稳定域。确定了多参数下Hopf分岔点及产生稳定极限环的条件。使用增量谐波平衡（IHB）法求解了自激振动的周期响应,按照Floquet理论确定了周期解的稳定性。最后,讨论了运动速度和平均风速稳定性的影响,并给出相应的稳定性条件。
英文摘要：
There exist axially translating string structures, e.g. string cars that operate under wind loadings in outdoor environments. The wind excitation may cause severe vibrations and jeopardize the safety of the strings. In this paper the authors investigate the nonlinear vibration of the translating strings with small sag-to-span ratios under wind excitations. The governing partial differential equation is obtained by modeling the wind excitation as a nonlinear function of the transport speed. The Galerkin approach is adopted to reduce the string to an approximate system with a few numbers of DOFs. After linearization of the system the stability of the equilibrium configuration is investigated through an eigenvalue analysis. Explicit conditions arc provided for loss of stability based on the Routh-Hurwicz criterion as well as for generation of stable limit cycles via the Hopf bifurcation, both taking transport speed and wind speed as the controlling parameters. The periodic motion of the string is determined using incremental harmonic method, with stability analyses carded out by eigenvalue computation for the Floquet multipliers. Various stability conditions arc presented considering the transport speed, wind speed and the viscous damping as operation parameters.
同期刊论文项目
同项目期刊论文
Roles of grain boundary and dislocations at different deformation stages of nanocrystalline copper u
Buckling behavior of carbon nanotube-based intramolecular junctions under compression: Molecular dyn
Comparison of theories for stability of truss structures Part 2: Computation of critical solution of
Combined identification of constitutive parameters and in-situ stresses for an elastic Cosserat mode
Effects of Constitutive Parameters and Dynamic Tensile Loads on Radially Periodic Oscillation of Mic
A numerical study of the imperfection effect on ultrananocrystalline diamond properties under differ
Molecular dynamics study of the specimen size and imperfection effects on the failure responses of m
A high efficient assembly technique for large proton exchange membrane fuel cell stacks: Part II App
The loading history and crystal orientation effects on the size-dependency of single crystal diamond
Simultaneous optimization of control parameters and configurations of PZT actuators for morphing str
Multiscale Model-Based Simulation with Applications to Nano and Bio Systems For the 8th World Congre
Topology optimization of continuum structures with different tensile and compressive properties in b
Solving heat transfer problems with phase change via smoothed effective heat capacity and element-fr
Equivalent analysis of orthogonal viscoelastic jointed rock via an adaptive algorithm in time domain
Penetration of Lipid Membranes by Gold Nanoparticles: Insights into Cellular Uptake, Cytotoxicity, a
Non-structure Specific Intensity Measure Parameters and Characteristic Period of Near-fault Ground M
Solving inverse couple-stress problems via an element-free Galerkin (EFG) method and Gauss-Newton al
Continuum topology optimization with non-probabilistic reliability constraints based on multi-ellips
A study of mechanical properties of pure and nitrogen-doped ultrananocrystalline diamond films under
An investigation of combined size, rate and thermal effects on the material properties of single cry
Identification of Geometric Boundary Configurations in Heat Transfer Problems Via Element-Free Galer
Non-probabilistic reliability-based topology optimization of geometrically nonlinear structures usin
Integrated design optimization of voltage channel distribution and control voltages for tracking the
Design of multi-tubular heat exchangers for optimum efficiency of heat dissipation Design of multi-t
Further study on efficiency of sequential approximate programming for probabilistic structural desig
A sequential approximate programming strategy for performance-measure-based probabilistic structural
Stability analyses for axially moving strings in nonlinear free and aerodynamically excited vibratio
A generalized JKR-model for two-dimensional adhesive contact of transversely isotropic piezoelectric
A new boundary search scheme for topology optimization of continuum structures with design-dependent
Recursive formulations for multibody systems with frictional joints based on the interaction between
Loading history effect on size-dependent shear strength of pure and nitrogen-doped ultrananocrystall
Coupling upscaling finite element method for consolidation analysis of heterogeneous saturated porou
位置：