欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
莺-琼盆地高温高压井压力台阶多、压力体系复杂，仅靠钻前地震资料预测难以满足现场作业要求。地层压力随钻预测技术是利用综合录井的压力随钻监测结果，实时修正钻前地层压力预测模型和结果，从而提高地层压力预测精度。本文结合高温高压Y1井的实例，应用国际先进的EquiPoise系统进行现场地层压力随钻监测，根据地层压力监测的实际结果来修正地层压力预测模型，进而对下部未钻地层的地层压力进行再预测。钻后实测压力验证表明，该方法的地层孔隙压力预测精度达到94%，说明利用地层压力随钻监测结果实时修正地层压力预测模型，可以实现提高地层压力预测精度目的，为高温高压井钻井参数设计、钻井方案调整和安全控制提供技术保证。
英文摘要：
In the Ying-Qiong Basin, HTHP wells are suffered from multiple pressure steps and complex pressure systems, so the field operation cannot be carried out satisfactorily only based on the predrilling seismic data prediction. The formation pressure prediction while drilling technology corrects in real time the predrilling formation pressure prediction model and the prediction results byusing the pressure monitoring results while drilling of compound logging, so as to increase the formation pressure prediction accuracy and protect oil and gas layers effectively. In this paper, a case study was carried out on HTHP Well Y1. In this well, internationally advanced Equipoise system is used for formation pressure monitoring while drilling in place. The formation pressure prediction model is corrected according to the actual monitoring results of formation pressure, and then the pressure of undrilled formation in the lower partis re-predicted. The measured pressure after the drilling indicates that the prediction accuracy of formation pore pressure based on this method is up to 94%. The practical application shows that formation pressure monitoring while drilling can be used to correct the formation pressure prediction model and increase the formation pressure prediction accuracy. It provides the technical support for the drilling parameter design of HTHP wells, drilling plan adjustment and safety control.
同期刊论文项目
同项目期刊论文
Study on a Ranging System Based on Dual Solenoid Assemblies, for Determining the Relative Position o
Mechanical Analyses of Casings in Boreholes, under Non-uniform Remote Crustal Stress Fields: Analyti
Effects of organo-modified montmorillonite on the tribology performance of bismaleimide-based nanoco
Coupled dynamic analysis of deepwater drilling riser under combined forcing and parametric excitatio
Experimental investigation on the non-planar propagation of hydraulic fracture in Fractured Shale Re
Finite element analysis of deepwater conductor bearing capacity to analyze the subsea wellhead stabi
On the collapse resistance of multilayer cemented casing in directional well under anisotropic forma
Simulation and analysis of coal seam conditions on the stress disturbance effects of pulsating hydro
On the Use of PEBI Grids in the Numerical Simulations of Two-Phase Flows in Fractured Horizontal Wel
Finite element method for simulating the effects of torque and drag on buckling of tubular inside bo
A new method for determining the minimum gas injection rate required for hole cleaning in horizontal
Static analysis of deep-water marine riser subjected to both axial and lateral forces in its install
Structure,and Properties of Poly (vinylacetate-co-methyl methacrylate) Nanocomposite Microspheres Wi
The Research on Borehole Stability in Depleted Reservoir and Caprock: Using the Geophysics Logging D
In-situ encapsulating MMT intermediate particles by suspension polymerization of poly (methyl methac
Mechanical behavior analysis for the determination of riser installation window in offshore drilling
Reactivation mechanism of natural fractures by hydraulic fracturing in naturally fractured shale res
A magnet ranging calculation method for steerable drilling in build-up sections of twin parallel hor
A new electromagnetic beacon tool for directional drilling in steam assisted gravity drainage horizo
Real-Time Prediction and Optimization of Drilling Performance Based on a New Mechanical Specific Ene
The sensibility of mechanical behavior to loading rate for shale gas reservoir with different weak p
On Appropriately Matching the Bottomhole Pendulum Assembly with the Anisotropic Drill Bit, to Contro
期刊信息
位置：