欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
为了分析隔水管的受力变形，将整体隔水管视为N跨受有纵横弯曲作用的连续梁，对其中任意一跨进行受力分析并建立挠曲微分方程。根据隔水管的边界条件和各跨梁之间的连续条件求解各跨梁的解析系数，得到隔水管总体的挠曲方程。分析了不同顶张力下隔水管位移、弯矩及Mises等效应力随深水的变化规律。结果表明：建立的力学模型与分析方法将以前求解隔水管受力变形的微分方程从四阶降为二阶，降低了求解难度，为分析隔水管力学行为提供了新的方法。
英文摘要：
In order to analyze marine riser mechanical behavior,the whole riser was modeled as a continuous beam-column with N span under actions of both axial and lateral loads.One span of the beam-column was cut out as an equilibrium unit to establish the equilibrium differential equa-tion,which can be solved on the basis of the riser boundary conditions and the continuous condi-tions between two adjacent crosses.The variation of riser lateral displacement,bending moment and Mises equivalent stress with water depth and top tension force were discussed.The results showed that the difficulty of solving riser behavior governing equation was reduced through trans-forming the four order differential equation pre-existing into a second order differential equation. The model established in this paper provided a new method to analyze riser mechanical behavior.
同期刊论文项目
同项目期刊论文
Study on a Ranging System Based on Dual Solenoid Assemblies, for Determining the Relative Position o
Mechanical Analyses of Casings in Boreholes, under Non-uniform Remote Crustal Stress Fields: Analyti
Effects of organo-modified montmorillonite on the tribology performance of bismaleimide-based nanoco
Coupled dynamic analysis of deepwater drilling riser under combined forcing and parametric excitatio
Experimental investigation on the non-planar propagation of hydraulic fracture in Fractured Shale Re
Finite element analysis of deepwater conductor bearing capacity to analyze the subsea wellhead stabi
On the collapse resistance of multilayer cemented casing in directional well under anisotropic forma
Simulation and analysis of coal seam conditions on the stress disturbance effects of pulsating hydro
On the Use of PEBI Grids in the Numerical Simulations of Two-Phase Flows in Fractured Horizontal Wel
Finite element method for simulating the effects of torque and drag on buckling of tubular inside bo
A new method for determining the minimum gas injection rate required for hole cleaning in horizontal
Static analysis of deep-water marine riser subjected to both axial and lateral forces in its install
Structure,and Properties of Poly (vinylacetate-co-methyl methacrylate) Nanocomposite Microspheres Wi
The Research on Borehole Stability in Depleted Reservoir and Caprock: Using the Geophysics Logging D
In-situ encapsulating MMT intermediate particles by suspension polymerization of poly (methyl methac
Mechanical behavior analysis for the determination of riser installation window in offshore drilling
Reactivation mechanism of natural fractures by hydraulic fracturing in naturally fractured shale res
A magnet ranging calculation method for steerable drilling in build-up sections of twin parallel hor
A new electromagnetic beacon tool for directional drilling in steam assisted gravity drainage horizo
Real-Time Prediction and Optimization of Drilling Performance Based on a New Mechanical Specific Ene
The sensibility of mechanical behavior to loading rate for shale gas reservoir with different weak p
On Appropriately Matching the Bottomhole Pendulum Assembly with the Anisotropic Drill Bit, to Contro
期刊信息
位置：