欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
采用自制的倾斜管实验装置,利用4因素6水平均匀设计方案,通过回归分析得到各因素对膏体料浆流变参数的影响规律;从充填倍线角度出发,分析膏体料浆流变参数和自流输送的规律,并建立最大允许充填倍线与流变参数模型。针对云南某铅锌矿实际充填情况,得到料浆质量分数为77%~80%时,其最大允许充填倍线分别为10.83、6.49、5.00和4.12,此结果能为井下不同位置采空区选择不同质量分数的膏体料浆提供理论依据。
英文摘要：
A four-factor of six-level uniform design scheme was used on the basis of a self-made inclined pipe experimental device. Affecting laws between each factor and rheological parameters for paste slurry were got by regression analysis. Laws of rheological parameters for paste slurry and gravity transport were analyzed, and then the models between the maximum stowing gradient and rheological parameters were established. According to the real filling conditions of a certain Pb＆Zn mine in Yunnan Province, China, when the mass fraction of slurry is from 77%to 80%, its maximum filling times lines are 10.83, 6.49, 5.00 and 4.12, respectively. These results provide theoretical basis for determining mass fraction of paste slurry in different underground goafs.
同期刊论文项目
同项目期刊论文
期刊信息
位置：