欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
采用电子束物理气相沉积（EB-PVD）技术，成功制备了尺寸为150mm×100mm的TiAl基合金薄板，并利用光学显微镜（OM）、扫描电子显微镜（SEM）和x射线衍射（XRD）等测试手段，对真空退火或热压前后试样的显微形貌、物相组成等进行了分析。结果表明，蒸镀态TiAl基合金薄板由 γ相、α2相和ι相组成，成分呈梯度变化，内部自然分层，显微组织结构为柱状晶；经1000℃，16h的真空退火处理后，柱状晶和τ相消失，α2相含量显著减少，成分趋于均匀化；而经1250℃，1h的真空热压处理后，材料致密度得到明显提高。TiAl基合金薄板经真空退火或热压处理前后，断裂方式由沿晶断裂转变为解理断裂和沿晶断裂的混合断裂方式。
英文摘要：
TiAl-based alloys sheet of 150 mm ×100 mm in size were successfully fabricated by electron beam-physical vapor deposition （EB-PVD） process. The phase composition and microscopic morphology were analyzed by optical microscope （OM）, scanning electron microscope （SEM） and X-ray diffractometer （XRD） for the as-deposited, as-annealed or as-pressed samples, respectively. The results show that the as-deposited sample of TiAl-based alloys sheet is composed of у, α2 andτ phases with a gradient component change, leading to the spontaneous delamination. The microstructure of as-deposited sheet is of columnar crystals. The columnar crystals and τ phase disappeared, and the a2 phase decreased greatly after vacuum annealing treatment at 1000 ℃ for 16 h, and the component tended to be uniform. After vacuum hot pressing treatment at 1250 ℃ for 1 h, the relative density of samples is increased obviously. Compared with the as-deposited samples, the fractographs of as-annealed or as-pressed samples were intergranular fracture and cleavage fracture. diverted from the intergranular fracture to the mixed manner of intergranular fracture and cleavage fracture.
同期刊论文项目
同项目期刊论文
Multiscale asymptotic method of optimal control on the boundary for heat equations of composite mate
Two collinear interface cracks between two dissimilar functionally graded piezoelectric/piezomagneti
Investigation the dynamic interaction between two collinear cracks in the functionally graded piezoe
Experimental study on tension and compression mechanical property of 3D fine woven punctured C/C com
Multiscale numerical algorithm for the elliptic eigenvalue problem with the mixed boundary in perfor
Multiscale asymptotic expansion for second order parabolic type equation with rapidly oscillating co
The dynamic behavior of two parallel symmetric cracks in functionally graded piezoelectric/piezomagn
Comparison of two NiCoCrAl/YSZ microlaminates deposited on substrates with different surface roughne
An effective computer generation method for the composites with random distribution of large numbers
Iterated two–scale asymptotic method and numerical algorithm for the elastic structures of composite
A reiterated two-scale probabilistic modeling and numerical simulation for heat equation in a fracta
Using strain energy-based prediction of effective elastic properties in topology optimization of mat
The two-order and two-scale method for heat conduction properties of composite materials with random
期刊信息
位置：