欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
随着深井、超深井和大位移井技术的发展，螺杆动力钻具（PDM）的使用越来越普遍，围绕着螺杆动力钻具压耗的计算也越来越受到钻井工作者的重视。通过对已有螺杆钻具压耗计算方法的归纳和总结，将螺杆钻具压耗计算方法分为一般法与模型法两大类，并对其进行了详细的分析比较。同时，优选罗伯逊一斯蒂夫钻井液流变模式，详细推导了圆筒模型中螺杆钻具压耗的计算方法。最后，完善了模型法中复杂模型法的螺杆钻具压耗推导过程。结果表明，当对螺杆钻具压耗计算精确度要求较高时，可选用模型法里的复杂模型方法来计算。
英文摘要：
With the development of the deep well, ultra deep well and extended reach drilling （ERD） technologies, the Positive Displacement Motor （PDM） has been used more and more popularly. Meanwhile, the pressure loss calculation method is paid much more attention. By concluding and summarizing the present pressure loss calculation methods, the paper divided them into two categories, general methods and model methods, for comparison and analysis in detail. In addition, the Roberston-Stiff（R-S） rheological model has been selected to deduce the pressure loss calculation method in the cylindrical model. Finally, the derivation process of the complex model, one of the model methods, has been perfected. The result shows that we can choose the complex model calculation method to get a high accuracy of pressure loss.
同期刊论文项目
同项目期刊论文
Study on a Ranging System Based on Dual Solenoid Assemblies, for Determining the Relative Position o
Mechanical Analyses of Casings in Boreholes, under Non-uniform Remote Crustal Stress Fields: Analyti
Effects of organo-modified montmorillonite on the tribology performance of bismaleimide-based nanoco
Coupled dynamic analysis of deepwater drilling riser under combined forcing and parametric excitatio
Experimental investigation on the non-planar propagation of hydraulic fracture in Fractured Shale Re
Finite element analysis of deepwater conductor bearing capacity to analyze the subsea wellhead stabi
On the collapse resistance of multilayer cemented casing in directional well under anisotropic forma
Simulation and analysis of coal seam conditions on the stress disturbance effects of pulsating hydro
On the Use of PEBI Grids in the Numerical Simulations of Two-Phase Flows in Fractured Horizontal Wel
Finite element method for simulating the effects of torque and drag on buckling of tubular inside bo
A new method for determining the minimum gas injection rate required for hole cleaning in horizontal
Static analysis of deep-water marine riser subjected to both axial and lateral forces in its install
Structure,and Properties of Poly (vinylacetate-co-methyl methacrylate) Nanocomposite Microspheres Wi
The Research on Borehole Stability in Depleted Reservoir and Caprock: Using the Geophysics Logging D
In-situ encapsulating MMT intermediate particles by suspension polymerization of poly (methyl methac
Mechanical behavior analysis for the determination of riser installation window in offshore drilling
Reactivation mechanism of natural fractures by hydraulic fracturing in naturally fractured shale res
A magnet ranging calculation method for steerable drilling in build-up sections of twin parallel hor
A new electromagnetic beacon tool for directional drilling in steam assisted gravity drainage horizo
Real-Time Prediction and Optimization of Drilling Performance Based on a New Mechanical Specific Ene
The sensibility of mechanical behavior to loading rate for shale gas reservoir with different weak p
On Appropriately Matching the Bottomhole Pendulum Assembly with the Anisotropic Drill Bit, to Contro
期刊信息
位置：