欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
为满足低比转数离心泵对多工况点效率和无过载特性要求，针对模型泵TS65-40-160，基于无过载理论进行设计优化，通过CFD分析内部流动分布规律，并采用快速成型模型试验进行对比分析。经过多方案改进得到较优方案2，该方案扬程在关死点、设计点以及最大流量点均高于设计要求；最高机组效率提高了14%，功率特性曲线出现了无过载趋势，在最大要求流量点48m^3/h处输入功率却未增大，且泵效率达到国家标准要求。经多方案CFD模拟和试验数据对比，证明模拟精度可满足模型优选要求。
英文摘要：
With the aim to meet the demand of a low-specific speed centrifugal pump for the high efficiency and non-overload characteristics at several specific operation points, a series of optimization were done on a model pump TS65-40-160. An impeller was designed based on the non-overload theory, and by analyzing the inner flow distribution in CFD and verify experiments, several improvements were taken to meet the complicated requirements. After several design improvements and experiments, an optimized scheme was obtained, whose head are slightly higher than the given indexes in the shut-off, designed and maximum flow rate points, and the maximum unit efficiency is increased by nearly 14%, and the pump efficiency also meet the national standard requirement, and the shaft power has the non-overload trend, and the power value at 48m^3/h is within the motor power. Through many results comparisons from CFD and experiment, a conclusion is drawn that the simulation error is small and it can meet the requirement for model optimization.
同期刊论文项目
同项目期刊论文
Numerical Investigation on Fluid Structure Interaction Considering Rotor Deformation for a Centrifug
Numerical characterization of pressure instabilities in a vaned centrifugal pump under partload cond
Numerical and Experimental Study on Flow-induced Noise at Blade-passing Frequency in Centrifugal Pum
期刊信息
位置：