位置：成果数据库 > 期刊 > 期刊详情页
Methods for estimating Weibull parameters for brittle materials,
  • 时间：0
  • 相关项目：化学反应工程
同期刊论文项目
化学反应工程
期刊论文 165 会议论文 35
同项目期刊论文
L-苯丙氨酸在单壁碳纳米管上的吸附行为
处理方法对活性炭在流化床反应器内甲烷催化裂解制氢活性的影响
金属膜开发应用研究新进展
Co/HZSM-5分子筛催化醛氨缩合反应活性的研究
Pd-Cu合金复合膜的制备及表征
处理方法对碳纳米管织构性质及负载Pd-Pt催化剂萘加氢反应活性的影响
化学气相沉积法制备碳纳米管过程中NH3对其微观结构和石墨化程度的影响
提高FCC汽油辛烷值的技术进展
吸附法脱除催化裂化汽油中含硫化合物的研究
Analysis of oxygen permeation through dense ceramic membranes with chemical reactions of finite rate
Evidence of composition deviation of metal particles of a Ni–Cu/Al2O3 catalyst during methane decomp
Effect of Metal-Support Interface on Hydrogen Permeation through Palladium Membranes
A high performance composite ionic conducting electrolyte for intermediate temperature fuel cell and
Modeling and simulation of a single direct carbon fuel cell
MCM-41 Overgrown on Y Composite Zeolite as Support of Pd-Pt Catalyst for Hydrogenation of Polyaromat
Tailoring the pore size of zeolite Y as the support of diesel aromatic saturation catalyst
Characterization of zirconia modified porous stainless steel supports for Pd membranes
介孔载体离子交换方式对其负载Pd-Pt催化剂加氢性能的影响
流化床与固定床中甲烷裂解制氢过程的比较
直接碳燃料电池研究进展
Adsorption of L-phenylalanine on single-walled carbon nanotubes
Preparation of Thin Palladium Composite Membranes and Application to Hydrogen/Nitrogen Separation
Vertically aligned carbon nanotube membranes on macroporous alumina supports
Mechanical Strength of Solid Catalysts: Recent Developments and Future Prospects
流化床中甲烷裂解制氢与催化剂再生过程研究
La、Ba离子对高温燃烧催化剂六铝酸盐结构和性质的影响
无模板剂二次生长法合成MFI分子筛膜的生长机理
制备条件对吸附剂脱硫性能的影响
高压乙醇中的无限稀释扩散系数:实验测定与模型评价
甲烷重整制氢气的研究进展
Suzuki Coupling Reactions in Ether-Functionalized Ionic Liquids: The Importance of Weakly Interactin
Biphasic Hydrogenation over PVP Stabilized Rh Nanoparticles in Hydroxyl Functionalized Ionic Liquids
Simulation of methane conversion to syngas in a membrane reactor: Part II: Model predictions
Treatment of the carbon nanofiber surfaces in mixed concentrated HNO3-H2SO4, and the catalytic activ
Synthesis of vertically aligned carbon nanotubes on macroporous alumina substrates
Study on non-hydrothermal synthesis and intercalation assembly of Zn-saponite
Synthesis and characterization of NiAl-HTLcs/saponite layer composites
Distribution of the Mechanical Strength of Solid Catalysts
Enhanced Activation and Decomposition of CH4 by the Addition of C2H4 or C2H2 for Hydrogen and Carbon
Preparation and characterization of Beta/MCM-41composite zeolite with a stepwise-distributed pore st
Effect of the sulfidation process on the mechanical properties of a CoMoP/Al2O3 hydrotreating cataly
Palladium nanoparticles stabilized by an ionic polymer and ionic liquid: a versatile system for C-C
High-Temperature Stability of Palladium Membranes on Porous Metal Supports with Different Intermedia
Effect of Alkaline Treatment on the Catalytic Performance of ZSM-5 Catalyst in Pyridine and Picoline
Thermodynamic Analysis of Hydrogen Production from Oxidative Steam Reforming of Ethanol
Effects of surface oxidation of carbon nanofibers in mixed concentrated HNO3-H2SO4 acid solution on
Low-temperature synthesis of carbon onions by chemical vapor deposition using a nickel catalyst supp
Electroless plating synthesis, characterization and permeation properties of Pd-Cu membranes support
Bamboo-shaped carbon nanotubes produced by catalytic decomposition of methane over nickel nanopartic
Effect of surface acid amount of Y zeolite on activity and sulfur tolerance of supported Pd-Pt catal
Study on sulfur tolerance of Pd-Pt catalyst supported on carbon nanofibers for hydrogenation of naph
Size effect on strength of alumina agglomerates
Influence of pretreatment condition of metal support on performance of metal supported hexaaluminate
Characterization and adsorption properties of porous carbon nanofiber granules
Promoting effects of doping ZnO into coprecipitated Ni-Al2O3 catalyst on methane decomposition to hy
Steam reforming of ethanol over Co3O4/CeO2 catalysts prepared by different methods
Physical activation and characterization of multi-walled carbon nanotubes catalytically synthesis fr
Unbiased estimation of Weibull parameters with the linear regression method
Fabrication and growth mechanism of carbon nanotubes by catalytic chemical vapor deposition
Statistical analysis of pellet size variation in commercial catalysts
Study on purification and tip-opening of CNTs fabricated by CVD
碱渣的综合治理与利用
Synthesis of pyridine and picolines over Co-modified HZSM-5 catalyst
Advances in catalytic hydrodenitrogenation
涂层浸渍法在Al_2O_3片上大面积合成碳纳米纤维,
MCM-41在微孔分子筛Y上的附晶生长
加氢脱氮催化研究的新进展
催化燃烧用金属整体催化反应器的制备及性能
结构化反应器的研究现状与发展前景
离子交换程序对Pd/Y催化剂萘加氢活性和耐硫性能的影响
柴油车排放的碳颗粒物微结构和化学分析
软模板法合成多级孔沸石分子筛及其催化性能研究进展
锌皂石的非水热合成与插层组装性能研究
CaxLa1-xMnAl11O19六铝酸盐催化剂上甲烷的催化燃烧