欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
对侵彻过程中内部装药轴向应力和变形进行理论分析,并考虑装药的弹塑性变形,得到轴向应力和形变量沿着装药轴向分布函数,以内壁与装药摩擦生热和热传导为基础,得到装药温度的分布曲线、最高温度在装药中的相对位置。计算结果表明,装药最高温升以及最高温升在装药中的位置与炸药的物性参数、装药长度和过载最大值相关,临界装药长度可作为弹体装药设计的参考,计算结果为弹体侵彻过程中的装药设计和安全性分析提供理论依据。
英文摘要：
The axial stress and the axial deformation of the charge explosive in a projectile was theoretically analyzed during the penetration process.The corresponding distribution functions along the axis of the charge explosive were attained by considering the elastic and plastic deformation of the charge explosive.Based on the friction-induced heat as well as the heat conduction,the temperature distribution along the axis of the charge explosive was obtained.Calculated results show that the maximum temperature rise and its location in the charge explosive are dependent on the charge length and the overload peak in addition to the physical property parameters of the explosive.The calculated critical charge length can be taken as a reference for the charge design.This investigation can provide a theoretical basis for the charge design and the safety analysis in the engineering practice of the projectile penetration.
同期刊论文项目
同项目期刊论文
Modeling the Damages Evolution in Compressed polymer bonded explosives based on computed microtomogr
Dynamic tensile deformation and fracture of a highly particle-filled composite using SHPB and high-s
Experimental study on the micromechanical behavior of a PBX simulant using SEM and digital image cor
Compressional punch loading test of a polymer bonded explosive simulant using digital image correlat
Simulation Studies of the Interfaces of Incompatiable Glycidyl Azide Polymer/Hydroxyl-Terminated Pol
Theoretical studies on the heats of formation,densities,and detonation properties of substituted s-t
Accurately Predicting the Density and Hydrostatic Compression of Hexahydro-1,3,5-Trinitro-1,3,5-Tria
Accurately predicting the structure, density, and hydrostatic compression of crystalline Beta-1,3,5,
Calculations of radiation characteristics of reflector antennas with surface deformation and perfora
A Micromechanical Model for Predicting Combined Damage of Particles and Interface Debonding in PBX E
Characterization of RDX-Based Thermosetting Plastic Bonded Explosive by Cone-beam Microfocus Compute
Anisotropic shock sensitivity for beta-octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine energetic ma
Orientation-dependent Constitutive Model with Nonlinear Elasticity for Shocked beta-HMX Single Cryst
Multiscale analysis of particle size dependent steady compaction waves in granular energetic materia
Thermal Mechanical Anisotropic Constitutive Model and Numerical Simulations for Shocked beta-HMX Sin
Study on Fracture Behaviour of a Polymer-Bonded Explosive Simulant Subjected to Uniaxial Compression
期刊信息
位置：