欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
入流控制装置（Inflow Control Device,ICD）近年来在水平井分段完井中应用日益广泛,但目前针对ICD 完井建立的半解析耦合模型无法准确反映水平井端部效应,在ICD 优化设计过程中对于目标入流剖面的选择缺乏依据.为此,首先引入了基于势的叠加原理和镜像反射原理的油藏渗流模型用以准确反映水平井入流特征,建立了适用于非均质底水油藏水平井ICD 完井的稳态耦合模型;之后考虑油井不同的生产制度,给出了非均质油藏水平井ICD 完井优化目标入流剖面的确定方法,并以喷嘴型ICD 为例对ICD 设计流程进行了具体描述,对最优非均匀ICD 和最优均匀ICD 计算结果进行了对比分析.结果表明：ICD 优化设计与生产制度有很大关系,均匀入流剖面并非总是理想的入流剖面;非均匀ICD 控流效果要优于均匀ICD,但均匀ICD 完井对井底流压有较宽的适应性;高生产压差有助于发挥喷嘴型ICD 的控流优势.
英文摘要：
The Inlfow Control Device (ICD) has been increasingly used in staged completion of horizontal wells in recent years. However, the semi-analytical coupling model built for ICD completion cannot accurately relfect the end effect in horizontal wells, and there is a lack of basis for the selection of target inlfow proifle during ICD optimization design. Therefore, a reservoir seepage model was ifrst introduced based on potential superposition principle and specular relfection principle to accurately relfect the inlfow features of horizontal wells, and a steady state coupling model was built which was suitable for ICD completion of heterogeneous bottom water reservoirs. Thereafter, in view of different production systems of oil wells, this paper provides the determination method for optimized target inlfow proifle of horizontal wells in heterogeneous reservoirs completed with ICD, describes in detail the design procedure of ICD taking nozzle-type ICD as an example and compares and analyzes the calculation results of optimal non-uniform ICD and optimal uniform ICD. The result shows that the optimized design of ICD is closely related to production system and uniform inlfow proifle is not always the ideal inlfow proifle.The lfow control effect of non-uniform ICD is superior to that of uniform ICD, but well completion with uniform OCD is more widely adaptable to the bottom hole lfow pressure.The high production pressure difference helps bring to play the lfow control advantage of nozzle-type ICD.
同期刊论文项目
同项目期刊论文
Study on a Ranging System Based on Dual Solenoid Assemblies, for Determining the Relative Position o
Mechanical Analyses of Casings in Boreholes, under Non-uniform Remote Crustal Stress Fields: Analyti
Effects of organo-modified montmorillonite on the tribology performance of bismaleimide-based nanoco
Coupled dynamic analysis of deepwater drilling riser under combined forcing and parametric excitatio
Experimental investigation on the non-planar propagation of hydraulic fracture in Fractured Shale Re
Finite element analysis of deepwater conductor bearing capacity to analyze the subsea wellhead stabi
On the collapse resistance of multilayer cemented casing in directional well under anisotropic forma
Simulation and analysis of coal seam conditions on the stress disturbance effects of pulsating hydro
On the Use of PEBI Grids in the Numerical Simulations of Two-Phase Flows in Fractured Horizontal Wel
Finite element method for simulating the effects of torque and drag on buckling of tubular inside bo
A new method for determining the minimum gas injection rate required for hole cleaning in horizontal
Static analysis of deep-water marine riser subjected to both axial and lateral forces in its install
Structure,and Properties of Poly (vinylacetate-co-methyl methacrylate) Nanocomposite Microspheres Wi
The Research on Borehole Stability in Depleted Reservoir and Caprock: Using the Geophysics Logging D
In-situ encapsulating MMT intermediate particles by suspension polymerization of poly (methyl methac
Mechanical behavior analysis for the determination of riser installation window in offshore drilling
Reactivation mechanism of natural fractures by hydraulic fracturing in naturally fractured shale res
A magnet ranging calculation method for steerable drilling in build-up sections of twin parallel hor
A new electromagnetic beacon tool for directional drilling in steam assisted gravity drainage horizo
Real-Time Prediction and Optimization of Drilling Performance Based on a New Mechanical Specific Ene
The sensibility of mechanical behavior to loading rate for shale gas reservoir with different weak p
On Appropriately Matching the Bottomhole Pendulum Assembly with the Anisotropic Drill Bit, to Contro
期刊信息
位置：