欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
在Gleeble-1500热模拟试验机上进行热压缩试验，研究了变形温度为900～1150℃，应变速率为0．001～10s^-1的TiC颗粒增强钛基复合材料的热变形行为。根据所得应力应变曲线分析了该合金的热变形特征，计算了α＋β区域的平均变形激活能为799kJ／mol，口区域平均变形激活能为105kJ／mol。并根据动力学模型建立了加工图，分析了加工图中的高功率耗散区和流变失稳区，确定了不同区域的变形机制。观察了变形后的显微组织。结果表明：在温度范围为900～980℃，应变速率范围为O．001～0．1s^-1的低应变速率区域发生了超塑性和动态再结晶；在温度范围为1000～1100℃；应变速率范围为0．1～10s^-1的高应变速率区域变形机制主要是由亚晶界迁移扩散控制的动态再结晶。两个流变失稳区分别发生在温度为900～950℃，应变速率为0．1～10s^-1的区域和温度为1080～1130℃，应变速率为0．001～0．01s^-1区域。
英文摘要：
The hot deformation behaviors of TiC particle-reinforced Ti matrix composites were studied at the temperature range of 900-1150 and the strain rate range of 0.001-10s^-1 on the Gleeble-1500 simulator by the hot compression test. On the basis of the obtained stress-strain curves, the hot deformation characteristics of the alloys were analyzed; the average deformation activation energy of 799 kJ/mol in the （α＋β） region and 105 kJ/mol in the β region were calculated using kinetic rate equation, and the processing map for hot working was established based on the kinetic model The high-power dissipation region and flow instability region in the processing map were analyzed. The deformation mechanism of different regions in the processing map was determined and the microstructure evolution after deformation was observed and studied. The results show that superplastic deformation and dynamic recrystallization was observed at 900-980 ℃ and 0.001-0.1 s^-1; the leading deformation mechanism is dynamic recrystallization which controlled by sub-boundary migration and diffusion at 1000-1100 ℃ and 0.1-10 s^-1; and the two flow instability regions appeared at the temperature range of 900-950 ℃ and strain rate range of 0.1-10 s^-1 and the temperature range of 1080-1130 ℃ and strain rate range of 0.001-0.01s^-1 according to the processing map.
同期刊论文项目
同项目期刊论文
Numerical simulation and experimental investigation of two filling methods in vertical centrifugal c
Microstructure and properties of pure titanium processed by equal-channel angular pressing at room t
期刊信息
位置：