位置：成果数据库 > 期刊 > 期刊详情页
An identification method for enclosed voids restriction in manufacturabilitydesign for additive manu
  • 期刊名称：Frontiers of Mechanical Engineering
  • 时间：2015
  • 页码：126-137
  • 相关项目：基于拓扑优化的消声材料和结构构型设计理论研究
作者： Liu Shutian|Li Q|Chen W|
同期刊论文项目
基于拓扑优化的消声材料和结构构型设计理论研究
期刊论文 50 会议论文 14
同项目期刊论文
多孔材料吸声性能分析与设计优化
A novel approach to design single-sided left-handed metamaterials with specifica frequency band
A topology optimization method for design of small GPR antennas
A new method of discrete optimization for cross-section selection of truss structures
非凸截面管与多胞方管轴向冲击能量吸收性能对比研究
周期性两相层状带隙材料优化设计
面向结构形状控制的驱动器结构参数与控制电压协同优化设计
Optimal design of two-dimensional band-gap materials for uni-directional wave propagation
Bionic design modification of non-convex multi-corner thin-walled columns for improving energy absor
结构电磁有限元分析的网格依赖性研究
XFEM-Based Analysis for Crack Growth Characteristics of Diffusion Bonded Laminates of Titanium Alloy
A novel method to design single-sided left-handed metamaterials with a specificfrequency band
Design optimization of S-frame for improving crashworthiness
Topology optimization-based lightweight primary mirror design of a large-aperture space telescope
Topology optimization of microstructures of viscoelastic damping materials for a prescribed shear mo
A fast numerical method for the analysis of the heat transfer performance of graded metallic honeyco
Design optimization of porous fibrous material for maximizing absorption of sounds under set frequen
基于梯度优化方法的钢结构标准截面选型优化设计
基于筋板式基结构的大口径空间反射镜构型设计的拓扑优化方法
基于拓扑优化的均匀磁场励磁结构设计方法
周期性吸声多孔材料微结构优化设计
A new sensitivity-improving method for piezoelectric resonance mass sensors through cantilever cross
H-DGTP—a Heaviside-function based directional growth topology parameterization for design optimizati
Topology optimization of patch-typed left-handed metamaterial configurations for transmission perfor
考虑位移补偿的结构几何稳定性拓扑优化
Design optimization of the S-frame to improve crashworthiness
周期性两相层状带隙材料优化模型
考虑可靠度可信区间的结构可靠性优化设计
小型制冷压缩机吸气阀的流固耦合分析和优化研究