欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
对豆油甲酯／0号柴油混合燃油的瞬态喷射过程进行了试验，采用高速摄影与相位多普勒粒子分析仪技术分别对喷雾锥角与液相贯穿距的变化、喷雾中心轴上轴向速度与径向速度的变化以及油滴粒径的分布情况进行了测试分析，并进一步对热强化条件下较大比例混入豆油甲酯的混合燃油雾化特性进行了试验．结果表明，常温下混合燃油豆油甲酯混入比例超过50％，雾化情况会明显恶化，对混合燃油进行热强化处理能使混合燃油中豆油甲酯体积分数为75％的燃油（B75）表现出较好的雾化特性，热强化温度达到473K时的雾化特眭接近0号柴油．
英文摘要：
Transient injection process of SME and diesel blends was investigated in this paper. High speed photography was used to study the transient spray cone angle and spray penetration. The axial velocity, radial velocity and distribution of particle size were measured using phase-Doppler particle anemome- ter （PDPA）. Spray characteristics were clarified especially for the blend with large proportion of SME un- der high temperature condition. Spray atomization will deteriorate when mixing ratio of SME is over 50%. B75 shows good atomization with thermal enhancement prior to injection. B 75 exhibits a similar atomization to 0# diesel at fuel temperature of 473 K, but the influence of axial velocity on spray is weakened.
同期刊论文项目
同项目期刊论文
EFFECT OF NOZZLE HOLE SIZE COUPLING WITHEXHAUST GAS RE-CIRCULATION ON THE ENGINE EMISSIONPERFORMANCE
Visualization experiment on cavitating flow of different length-diameter ratios using diesel and bio
Experimental study of flow regime characteristics in diesel multi-hole nozzles with different struct
Effect of nozzle geometrical and dynamic factors on cavitating and turbulent flow in a diesel multi-
A numerical study of the effects of injection rate shape on combustion and emission of diesel engine
Numerical study of effect of injection parameters on combustion and emission performance of a direct
STUDY ON EFFECT OF FUEL INJECTION STRATEGY ON COMBUSTION NOISE AND EXHAUST EMISSION OF DIESEL ENGINE
Experimental study of cavitating flow inside vertical multi-hole nozzles with different length-diame
Experimental study of cavitating flow inside enlarged transparent injector nozzles and its effect on
An experimental investigation of cavitating flow in diesel injector nozzle under different back pres
期刊信息
位置：