欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
在直径50mm的冷模流化床与固定床耦合反应器中，考察了活性炭颗粒在130～150℃及不同气速下的磨损情况，得到了不同气速下固定床中圆柱状颗粒的磨损率随时间的变化关系，同时分析了滞留在流化床、固定床及袋滤器中的细颗粒在不同气速下的粒径分布与质量分布．结果表明，颗粒在该耦合反应器中磨损严重，在0．212～0．424m／s气速下，固定床中颗粒质量损失可达3％-4％，流化床中颗粒平均粒径由200μm降至100μm以下．
英文摘要：
The cold model experiments on the attrition of activated carbon particles were conducted in a steel-made coupled fluidized and fixed bed reactor with a diameter of 50 mm at 130-150 ℃. The relationship between the weight loss of particles （4.2 mm in diameter, cylinder-like particles） at the fixed bed section and gas velocity was analyzed. The fine particles （0.2 mm in average size, pristine） of fiuidized bed reactor, remained in the fluidized bed, fixed bed and the filter after fluidization, were studied thoroughly to understand their profiles of particle size and their mass ratio in different positions under different gas velocities. It was found that the attrition of particles was serious. Under the high gas velocity （0.212-0.424 m/s）, the weight loss of particles in the fixed bed was 3%-4%, and the mean size of fine particles in the fluidized bed was reduced from 200 μm to below 100 μm.
同期刊论文项目
同项目期刊论文
Modulating the diameter of carbon nanotubes in array form via floating catalyst chemical vapor depos
Growth deceleration of vertically aligned carbon nanotube arrays: Catalyst deactivation or feedstock
The mass production of carbon nanotubes using a nano-agglomerate fluidized bed reactor: A multiscale
Synthesis of single-walled carbon nanotubes with narrow diameter distribution by calcination of a Mo
Synthesis of vertically aligned CNTs with hollow channel on Al2O3-Al substrate electroplated with fe
Synthesis of thin-walled carbon nanotubes from methane by changing the Ni/Mo ratio in a Ni/Mo/MgO ca
The confined growth of double-walled carbon nanotubes in porous catalysts by chemical vapor depositi
期刊信息
位置：