位置：成果数据库 > 期刊 > 期刊详情页
基于数字图像技术的WC-Co硬质合金横向断裂强度预测
  • ISSN号：1003-7292
  • 期刊名称：硬质合金
  • 时间：2012
  • 页码：1-5
  • 相关项目：基于性能驱动的难加工材料切削刀具设计制造理论与关键技术研究
作者： 王泽明|赵军|李安海|王东|
同期刊论文项目
基于性能驱动的难加工材料切削刀具设计制造理论与关键技术研究
期刊论文 44
同项目期刊论文
WC-Co硬质合金微观结构随机性表征
WC-Co硬质合金微观结构随机分布模型与弹性性能预报
基于微观结构的WC-Co硬质合金硬度预报模型
Effect of cutting speed on cutting forces and wear mechanisms in high-speed face milling of Inconel
Surface Integrity of High-Speed Face Milled Ti-6Al-4V Alloy with PCD Tools
Failure mechanisms of a PCD tool in high-speed face milling of Ti-6Al-4V alloy
Failure Mechanisms of Graded Ceramic Tool in Ultra High Speed Dry Milling of Inconel 718
The effects of cutting parameters on tool life and wear mechanisms of CBN tool in high-speed face mi
Three-point bending fatigue behavior of WC-Co cemented carbides
The wear of Al2O3-based Ceramic Cutting Tool in high-speed face milling of AISI H13 steel
Experimental study on cutting forces and surface integrity in high-speed side milling of Ti-6Al-4V t
Cutting forces and surface roughness in high-speed end milling of Ti6Al4V
Cutting performance of coated carbide tools in high-speed face milling of AISI H13 hardened steel
Cutting forces, chip formation, and tool wear in high-speed face milling of AISI H13 steel with CBN
Damage mechanics analysis of failure mechanisms for ceramic cutting tools in intermittent turning
Performance Evaluation of Ultra-Fine Grain Carbide in High-Speed Milling of Ti-6Al-4V
Simulation-based solid carbide end mill design and geometry optimization
Fabrication and mechanical properties of homogenous and graded Si3N4/(W, Ti)C nano-composite ceramic
Comparison of Ti(C, Ti)-based cermets processed by hot-pressing sintering and conventioanl pressurel
A comparative study on Johnson-Cook constitutive modeling for Ti-6Al-4V alloy using automated ball i
Preparation and characterization of Si3N4/(W,Ti)C nano-composite ceramic tool materials
Chip Formation in High-Speed Milling of Titanium Alloy with PCD tools
Wear Mechanisms of Ceramic Tools in High-speed Turning of Superalloy GH2132
WC-Co硬质合金微观结构的参数化模型
Performance of graded nano-composite ceramic tools in ultra-high-speed milling of Inconel 718
Extended finite element modeling of crack propagation in ceramic tool materials by considering the m
Friction and wear behaviors of Sialon-Si3N4 graded nano-composite ceramic materials in sliding wear
Experimental investigation on chip morphologies in high speed dry milling of titanium alloy Ti-6Al-4
Thermal shock and thermal fatigue resistance of Sialon-Si3N4 graded ceramic materials
最大取向值对晶粒生长元胞自动机模拟结果的影响
陶瓷材料烧结致密化过程的元胞自动机模拟
AlCrN涂层的残余热应力分析
Surface roughness and chip formation in high speed face milling AISI H13 steel
Cutting Force and Tool Wear in Face Milling of Hardened Steel
Effects of cutting conditions on microhardness and microstructure in high-speed milling of H13 tool
Microstructure-level modeling and simulation of the flexural behavior of ceramic tool materials
Three-dimensional finite element modeling of high-speed end milling operations of Ti-6Al-4V
Microstructure level modelling for properties prediction of WC-Co cemented carbides
A comparison between whisker-reinforced alumina and SiAlON ceramic tools in high-speed face milling
Cutting Performance and Tool Failure in Intermittent Turning Processes of an Al2O3-based Micro-Nano-
含有烧结助剂的复相陶瓷材料烧结过程的元胞自动机模拟
高速车削TC11分形特征实验研究
期刊信息
  • 《硬质合金》
  • 中国科技核心期刊
  • 主管单位:株洲硬质合金集团有限公司
  • 主办单位:中国钨业协会硬质合金分会、株洲硬质株洲硬质合金集团有限公司 中国钨业协会硬质合金分会
  • 主编：王辉平
  • 地址：湖南株洲钻石路288号
  • 邮编：412000
  • 邮箱：yzhjbjb@163.com
  • 电话：0731-28260450
  • 国际标准刊号：ISSN：1003-7292
  • 国内统一刊号：ISSN：43-1107/TF
  • 邮发代号:
  • 获奖情况:
  • 全国中文核心期刊,中国科技论文统计源期刊
  • 国内外数据库收录:
  • 美国化学文摘（网络版）,中国中国科技核心期刊,中国北大核心期刊（2004版）,中国北大核心期刊（2008版）
  • 被引量:3110