通过野外观测和模型模拟,研究了六盘山主要森林类型的冠层截留量、冠层截留容量和冠层截留模拟参数的变化.结果表明:六盘山主要森林类型的冠层截留率在8.59%~17.94%,穿透降雨率超过80%,树干茎流率在0.23%~3.10%;冠层截留容量在0.78~1.84 mm,其中叶截留容量在0.62~1.63 mm,枝干截留容量在0.13~0.29 mm,且针叶林的冠层截留容量高于阔叶林.考虑冠层叶面积指数的冠层截留改进模型较原有模型具有更好的模拟精度,其中,研究区红桦林、华山松林、李灌丛和辽东栎-少脉椴混交林的模拟效果较好,辽东栎林、油松林和华西四蕊槭-石枣子灌丛模拟效果相对较差,这可能与冠层结构、叶面积指数以及降水特性等差异有关.
Based on field observation and modeling analysis,this paper studied the canopy interception,interception capacity,and some parameters for interception modeling of main forest types in Liupan Mountains of China.For the test main forest types,the ratio of their canopy interception to precipitation ranged from 8.59% to 17.94%,throughfall was more than 80%,and stemflow ranged from 0.23% to 3.10%.The canopy interception capacity was 0.78-1.88 mm,among which,leaf interception capacity was 0.62-1.63 mm,and stem interception capacity was 0.13-0.29 mm.Conifer forest had a higher canopy interception capacity than broad-leaved forest.The modified model considering the change of leaf area index,which was used in this paper,had a higher simulating precision than the interception model used before.The simulation results for Betula albo-sinensis forest,Pinus armandii forest,Prunus shrub,and Quercus liaotungensis-Tilia paucicostata forest were good,but those for Quercus liaotungensis forest,Pinus tabulaeformis forest,and Acer tetramerum and Euonymus sanguineus shrub were bad,which might be related to the differences in canopy structure,leaf area index,and precipitation characteristics.